• 전기학회논문지P
• /
• 제65권2호
• /
• pp.108-113
• /
• 2016

The real-world problems usually show nonlinear and multi-variate characteristics, so it is difficult to establish concrete mathematical models for them. Thus, it is common to practice data-driven modeling techniques in these cases. Among them, most widely adopted techniques are regression model and intelligent model such as neural networks. Regression model has drawback showing lower performance when much non-linearity exists between input and output data. Intelligent model has been shown its superiority to the linear model due to ability capable of effectively estimate desired output in cases of both linear and nonlinear problem. This paper proposes modeling method of daily photovoltaic power systems using ELM(Extreme Learning Machine) based modular networks. The proposed method uses sub-model by fuzzy clustering rather than using a single model. Each sub-model is implemented by ELM. To show the effectiveness of the proposed method, we performed various experiments by dataset acquired during 2014 in real-plant.

• Computers and Concrete
• /
• 제15권1호
• /
• pp.89-101
• /
• 2015

In this paper, Artificial Neural Networks (ANN) and Multiple Linear Regression (MLR) models were discussed to determine the compressive strength of clinker mortars cured for 1, 2, 7 and 28 days. In the experimental stage, 1288 mortar samples were produced from 322 different clinker specimens and compressive strength tests were performed on these samples. Chemical properties of the clinker samples were also determined. In the modeling stage, these experimental results were used to construct the models. In the models tricalcium silicate ($C_3S$), dicalcium silicate ($C_2S$), tricalcium aluminate ($C_3A$), tetracalcium alumina ferrite ($C_4AF$), blaine values, specific gravity and age of samples were used as inputs and the compressive strength of clinker samples was used as output. The approximate reasoning ability of the models compared using some statistical parameters. As a result, ANN has shown satisfying relation with experimental results and suggests an alternative approach to evaluate compressive strength estimation of clinker mortars using related inputs. Furthermore MLR model showed a poor ability to predict.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.8-9
• /
• 2021

The unit-water content of concrete is one of the important factors in determining the quality of concrete and is directly related to the durability of the construction structure, and the current method of measuring the unit-water content of concrete is applied by the Air Meta Act and the Electrostatic Capacity Act. However, there are complex and time-consuming problems with measurement methods. Therefore, high frequency moisture sensor was used for quick and high measurement, and unit-water content of mortar was evaluated through machine running and deep running based on measurement big data. The multi-input deep learning model is as accurate as 24.25% higher than the OLS linear regression model, which shows that deep learning can more effectively identify the nonlinear relationship between high-frequency moisture sensor data and unit quantity than linear regression.

• Clinics in Shoulder and Elbow
• /
• 제16권1호
• /
• pp.63-72
• /
• 2013

임상 의학의 연구에 사용되는 대표적 다변량 분석 방법은 다중 회귀 분석 방법인데, 이는 인과 관계를 토대로 여러 개의 변수에 의한 한꺼번에의 영향력을 분석하기 위한 방법이다. 다중 회귀 분석은 기본적으로 회귀 분석의 기본 가정을 만족해야 함은 물론, 여러 개의 독립 변수들이 포함되기 때문에 변수들을 모형에 포함시키는 방법 및 다중 공선성 문제에 대한 고려가 필요하다. 다중 회귀 분석 모형의 설명력은 결정 계수 $R^2$으로 표현되어 1에 가까울수록 설명력이 크며, 각 독립 변수들의 결과에의 영향력은 회귀 계수인 ${\beta}$값으로 표현된다. 다중 회귀 분석은 종속 변수의 형태에 따라 다중 선형 회귀 분석, 다중 로지스틱 회귀 분석, 콕스 회귀 분석으로 나눌 수 있다. 종속 변수가 연속 변수인 경우 다중 선형 회귀 분석, 범주형 변수인 경우 다중 로지스틱 회귀 분석, 시간의 영향을 고려한 상태 변수인 경우는 콕스 회귀 분석을 시행해야 하며, 각각 결과에의 영향력은 회귀 계수 ${\beta}$, 교차비, 위험비로 평가한다. 이러한 다변량 분석에 대한 이해는 연구를 계획하고 결과를 분석하고자 하는 임상 의사에게 있어 보다 효율적인 연구를 위해 필수적인 소양이라고 할 수 있다.

• Structural Engineering and Mechanics
• /
• 제77권2호
• /
• pp.261-272
• /
• 2021

The energy-saving block and invisible multi-ribbed frame composite wall (EBIMFCW) is a new type of load-bearing wall. The study of this paper focus on it is hysteresis rule under horizontal cyclic loading. Firstly, based on the experimental data of the twelve specimens under horizontal cyclic loading, the influence of two important parameters of axial compression ratio and shear-span ratio on the restoring force model was analyzed. Secondly, a tetra-linear restoring force model considering four feature points and the degradation law of unloading stiffness was established by combining theoretical analysis and regression analysis of experimental data, and the theoretical formula of the peak load of the EBIMFCW was derived. Finally, the hysteretic path of the restoring force model was determined by analyzing the hysteresis characteristics of the typical hysteresis loop. The results show that the curves calculated by the tetra-linear restoring force model in this paper agree well with the experimental curves, especially the calculated values of the peak load of the wall are very close to the experimental values, which can provide a reference for the elastic-plastic analysis of the EBIMFCW.

• Korean Chemical Engineering Research
• /
• 제46권3호
• /
• pp.567-570
• /
• 2008

내경 0.109 m의 유동층에서 다입자경 모래에 대한 압력요동의 표준편차와 유속간의 선형회귀분석을 이용한 최소유동화속도 측정법의 적용성을 조사하였다. 다입자경 모래를 평균입자크기가 같은 Gaussian 분포에서 입자분포의 표준편차에 따른 최소유동화속도를 측정하고, 측정치를 타 연구자들의 식과 비교 검토하였다. 압력요동의 표준편차 값 선형회귀분석법과 층내 압력강하로부터 구한 최소유동화속도를 구하였다. 최소유동화속도 결정에서 유속 범위는 혼합도가 낮은 유속범위와 free bubbling 영역 이상을 제외한 범위값 이어야 하며, 이 유속범위에서 측정위치는 혼합이 양호한 층 중앙이 가장 적절하다.

• 사물인터넷융복합논문지
• /
• 제9권2호
• /
• pp.71-76
• /
• 2023

본 논문에서는 단일 수신기가 사용되는 환경에서 정확한 거리 추정을 위해 심층 인공신경망 (Deep Neural Network, DNN)을 활용한 Smoothed Received Signal Strength Indicator (RSSI) 기반 거리 추정 기법을 제안한다. 제안 기법은 거리 추정 정확도 향상을 위해 Data Splitting, 결측치 대치, Smoothing 단계로 구성된 전처리 과정을 수행하여 Smoothed RSSI 값을 도출한다. 도출된 다수의 Smoothed RSSI 값은 Multi-Input Single-Output(MISO) DNN 모델의 Input Data로 사용되며 Input Layer와 Hidden Layer를 통과하여 최종적으로 Output Layer에서 추정 거리로 반환된다. 제안 기법의 우수성을 입증하기 위해 제안 기법과 선형회귀 기반 거리 추정 기법의 성능을 비교하였다. 실험 결과, 제안 기법이 선형회귀 기반 거리 추정 기법 대비 29.09% 더 높은 거리 추정 정확도를 보였다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
• /
• pp.217-220
• /
• 2003

In the case of the remediation studies, push pull test is a more time and cost effective mettled than multi-well tracer test. It also gives Just as much or more information than the traditionally used methods. But the data analysis for the hydraulic parameters, there have been some defections such as underestimation of dispersivity, requirement for effective porosity, and calculation of recovery of center of mass to estimate linear velocity. In this research, Weibull distribution function is proposed to estimate the center of mass of breakthrough curve for Push pull test. The hydraulic parameter estimation using Weibull function showed more exact values of center of mass than those of exponential regression for field test data.

• 한국컴퓨터정보학회논문지
• /
• 제22권7호
• /
• pp.31-37
• /
• 2017

There are lots of combined battlefield elements which complete the war. It looks problematic when collecting and analyzing these elements and then predicting the situation of war. Commander's experience and military power assessment have widely been used to come up with these problems, then simulated combat training program recently supplements the war-game models through recording real-time simulated combat data. Nevertheless, there are challenges to assess winning factors of combat. In this paper, we characterize the combat element (ce) by clustering simulated combat data, and then suggest multi-layered artificial neural network (ANN) model, which can comprehend non-linear, cross-connected effects among ces to assess mission completion degree (MCD). Through our ANN model, we have the chance of analyzing and predicting winning factors. Experimental results show that our ANN model can explain MCDs through networking ces which overperform multiple linear regression model. Moreover, sensitivity analysis of ces will be the basis of predicting combat situation.

• Industrial Engineering and Management Systems
• /
• 제1권1호
• /
• pp.73-78
• /
• 2002

In this paper, we propose a constrained optimization model for conjoint analysis (a preference decomposition technique) to improve parameter estimation by restricting the relative importance of the attributes to an extent as decided by the respondents. Quite simply, respondents are asked to provide some pairwise attribute comparisons that are then incorporated as additional constraints in a linear programming model that estimates the partial preference values. This data collection method is typical in the analytic hierarchy process. Results of a simulation study show the new model can improve the predictive accuracy in partial value estimation by ordinal east squares (OLS) regression.