• 한국인터넷방송통신학회논문지
• /
• 제16권3호
• /
• pp.97-102
• /
• 2016

UFMC(Universal Filtered Multi-Carrier)는 최근 5G통신 시스템의 전송방식 후보로 주목 받고 있는 다중 반송파 송신기술 중의 하나이다. UFMC는 OFDM(Orthogonal Frequency Division Multiplex)의 단순함과 FBMC(Filter Bank Multi-Carrier)의 장점을 합쳐놓은 방식으로 볼 수 있다. CFO(Carrier Frequency Offset)는 다중 반송파 전송방식에서 부 반송파간의 불일치를 일으켜 BER 성능을 낮게 하는 문제점으로 작용하고 있다. UFMC에서의 CFO영향은 OFDM 보다는 크지 않지만 여전히 부 밴드간의 간섭을 일으켜 시스템 성능을 열화 시키고 있다. 이 논문에서는 UFMC에서 CFO의 변화와 EsNo값에 따른 SNR 열화를 분석 하였다.

• 한국의류산업학회지
• /
• 제5권3호
• /
• pp.295-298
• /
• 2003

The study investigated the effect of multi-functional fabric on the autonomic nervous function and psychological variables of 20 students. The experimental group exhibited lower values in anxiety, depression, fatigue and stress level and higher emotional level. This study reveals that multi-functional fabrics reduced the low frequency/high frequency power ratio of heart rate variability. These results support the multi-functional fabrics increases cardiac parasympathetic tone. In addition, experimental group were found to have lower heart rate compared with controls. This augmented heart rate in experiment provides support for stablizing autonomic nervous system. In conclusion, multi-functional fabrics may stabilize the autonomic nervous system and psychological symptoms.

• 한국주조공학회지
• /
• 제9권6호
• /
• pp.463-473
• /
• 1989

This study is aimed to investigate the effect of cyclic heat treatment which is special heat treatment on the strength and toughness in Multi-phase(Ferrite-Bainite-Martensite) Ductile cast Irons. Spceimens were austenitized at eutectoid transformation temperature range(${\alpha}+{\gamma}$) for 30min and austempered at $300^{\circ}C$ and $400^{\circ}C$ for different holding times, and then quenched in ice water to obtain the multi-phase(Ferrite-Bainite-Martensite) structure from various prior structures, which was obtained by various cyclic heat treatments. As the number of cycle in cyclic heat treatment increased, volume fraction of pearlite increased and the its morphology was refined. As the number of cycle in cyclic heat treatment increased, the multi-phase(Ferrite-Bainite-Martensite) was dispersed in whole matrix as refined island phase. Particularly, martensite among the multi-phase gradually became a spherical shape. Good combination in impact energy and tensile strength was detained in $840^{\circ}C-300^{\circ}C-15min$ condition after 10 cycles in cyclic heat treatment, and its multi-phase volume fraction is Ferrite(50%)-Martensite(l3%)-Bainite(37%).

• Smart Structures and Systems
• /
• 제30권5호
• /
• pp.513-520
• /
• 2022

During the long-time service of a bolt, its preload may suffer slight perturbations or significant reductions. It is a dilemma to monitor preload changes at high resolution and full scale. Approaches for bolt preload monitoring with multi-resolution should be developed. In this paper, a simple and effective multi-resolution bolt preload monitoring approach using ultrasonic guided waves (UGW) is proposed. A linear relationship between the time-of-flight (TOF) variation of multi-reflected waves and preload is derived to theoretically reveal the multi-resolution properties of UGW. The variations of TOF before and after the slight preload perturbations are extracted by using a global evaluation method. Experimental results show that the signal-to-noise ratio (SNR) of the 1^st, 2^nd, and 3^rd-reflected UGWs is larger than 20 dB. The resolution of the 2^nd-reflected UGW is higher than that of the 1^st-reflected UGW and lower than that of the 3^rd-reflected UGW. The ultimate detectable resolutions of bolt preload (DRBP) of the 1^st and 3^th-reflected UGWs are 0.9% and 0.5%, respectively. By using the 1^st and 3^th-reflected guided waves, the bolt looseness with different degrees can be monitored simultaneously.

• Advances in nano research
• /
• 제5권1호
• /
• pp.1-12
• /
• 2017

In this paper, the critical buckling temperature of single-walled Boron Nitride nanotube (SWBNNT) is estimated using a new nonlocal first-order shear deformation beam theory. The present model is capable of capturing both small scale effect and transverse shear deformation effects of SWBNNT and is based on assumption that the inplane and transverse displacements consist of bending and shear components, in which the bending components do not contribute toward shear forces and, likewise, the shear components do not contribute toward bending moments. Results indicate the importance of the small scale effects in the thermal buckling analysis of Boron Nitride nanotube.

• 전자공학회논문지A
• /
• 제31A권1호
• /
• pp.9-16
• /
• 1994

In this paper, we propose a frequency assignment algorithm to minimize intermodulation effect which is caused by nonlinear amplipification of the satellite transponder. Allmost all of the published algorithms up to now are applicable to one-level SCPC systems, the application range of those algorithms is very restricted from the viewpoint of actual practice. In this paper, we develope and propose a new frequency assignment algorithm which utilize the basic concept of Okinaka's DELINS-INSDEL algorithm to extend its applicabilty from one-level SCPC systems to multi-level systems. The proposed TDTI algorithm provides considerable generality in reducing intermodulation effect in practical satellite communication systems because of its alpplicability to multi-level and multi-bandwidth systems as well as one-level systems. Besides the TDTI algorithm which shows excellent characteristics in performance but requires somewhat long excution time. the WTDI-SDELINS algorithm is proposed in this paper to compensate TDTI's demerits in excution time. Considering the fact that there are very little published sterategies for multi-level and muti-bandwidth systems. the algorithm proposed in this paper is quite meaningful.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1026-1029
• /
• 2003

There are always some errors in force sensing of multi-axis force sensors that aggravate sensor performance. Error sources may be classified mainly in two groups. One is structural error due to inaccuracy of sensor body, and the other is error due to noise signals existing in the sensed information. This paper presents a brief review about the principle of multi-axis force sensors, and then a method that can reduce the effect of noise signals. The method is to read digital signals in computer instead of analog voltage signals. We can eliminate the bad effect of electromagnetic waves emitted from computer and of 60 Hz noise emitted from AC source by the proposed method. The proposed method is investigated through experimental demonstration. The experimental results show the proposed method improves the sensor performance significantly.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.393-399
• /
• 2008

A modeling method for the modal analysis of a pre-twisted multi-packet blade system undergoing rotational motion is presented in this paper. Blades are idealized as pre-twisted cantilever beams that are fixed to a rotating disc. The stiffness coupling effects between blades due to the flexibilities of the disc and the shroud are modeled with discrete springs. The coupling effect between chordwise and flapwise bending deflection is also considered. Hybrid deformation variables are employed to derive the equations of motion. To obtain more general information, the equations of motion are transformed into dimensionless forms in which dimensionless parameters are identified. The effects of the dimensionless parameters and the number of packets as well as blades on the modal characteristics of the rotating multi-packet pre-twisted blade system are investigated with some numerical examples.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.814-819
• /
• 2004

In this paper, a modeling method for the vibration analysis of rotating structures employing multi-reference frames is presented. The geometric stiffening effect that results from centrifugal inertia force is considered. In most previous studies single reference frame has been employed for the analysis. In the present study, a modeling method employing multi-reference frames is presented, and the effects of employing multi-reference frames on the analysis accuracy are investigated through solving numerical examples.

• 한국정밀공학회지
• /
• 제20권10호
• /
• pp.199-207
• /
• 2003

The Timoshenko beam model has been known as the most accurate model for representing beam structures. However, the Timoshenko beam model may give rise to a significant error when it is applied to multi-stepped beam structures. This paper is intended to demonstrate the modeling error of Timoshenko beam based finite element model for multi-stepped beam structures and to suggest a new modeling method to improve the accuracy. A tentative bending spring is introduced into the stepped section to represent the softening effect due to the presence of step. This paper also proposes a finite element modeling method in the light with the tentative bending spring model for the step softening effect. The proposed method rigorously adapts computation results from a commercial finite element code. The validity of the proposed method is demonstrated through a series of simulation and experiment.