• 한국강구조학회 논문집
• /
• 제26권2호
• /
• pp.91-103
• /
• 2014

최근에 인장강도 800MPa급 고성능 강재가 개발되었지만 플랜지와 복부판의 상호작용을 고려한 플레이트 거더의 국부좌굴에 대한 연구는 아직까지 미흡한 실정이다. 본 연구는 HSB 800을 적용한 플레이트 거더의 플랜지 국부좌굴에 대한 강도를 비선형 유한요소해석으로 평가하였다. 비선형 해석 시 I-단면을 갖는 플레이트 거더의 플랜지와 복부판은 3차원 쉘요소로써 초기결함 및 잔류응력을 고려하였으며, 고성능 강재의 재료모델은 다중선형 재료로 모형화하였다. 이를 적용하여 복부판이 조밀, 비조밀 그리고 세장 단면을 갖는 압축 플랜지에 대해 매개변수 해석을 수행하였다. 플레이트 거더의 플랜지 국부좌굴에 대한 거동을 분석하였고, 본 연구의 비선형 해석 결과를 AASHTO LRFD(2012)와 도로교설계기준(한계상태설계법, 2012)의 압축플랜지 공칭휨강도와 비교하여 평가하였다.

• 상하수도학회지
• /
• 제20권4호
• /
• pp.595-604
• /
• 2006

The growth characteristics of Commercially Developed Nitrifying Bacteria (CDNB) were studied in laboratoryscale. CDNB, a pure, artificially isolated bacterium, was cultivated to produce Cultivated Nitrifying Bacterium Group (CNBG). The average ammonia removal rate of CDNB was 0.0234g $NH_4^+-N/g$ MLSS/hr. CNBG was produced in the batch reactor and Specific Nitrification Rate (SNR) was determined at 0.0107g $NH_4^+-N/g$ MLSS/hr. The SNR of CNBG was lower than the SNR of CDNB because the diverse and multi-cultured microbial growth took place during cultivation. The effect of the temperatures and the mixing ratios of sewage and culture solution on the SNR of CNBG was studied. The SNR of CNBG, 0.0107g $NH_4^+-N/g$ MLSS/hr at $27^{\circ}C$, decreased to 0.0048g $NH_4^+-N/g$ MLSS/hr at $15^{\circ}C$, and temperature coefficient (${\Theta}$) was calculated to be 1.07. With the varied sewage mixing ratios, the SNR of CNBG remained unchanged. Activated sludge reactors maintaining an MLSS of 2,000mg/L at HRT of 4 h were operated under conditions in which dosage of Concentrated CNBG Solution (CCNBGS, 10,000mg MLSS/L) and application method of CNBG were varied. The reactor with 20mL of CCNBGS took shorter time to oxidize $NH_4^+-N$ reaching 1mg/L than the reactor with 5mL of CCNBGS showing that higher dosages were associated with greater mass removal of $NH_4^+-N$. However, the total removal was not great. In terms of different methods of CNBG application, reactor seeded with 20mL of CCNBGS took 3days to reach 1mg/L of effluent ammonia concentration while reactor dosed with 20% (v/v) CNBG implanted media took 2days. Both the control reactor and the reactor dosed with 20% (v/v) media only did not reach 1mg $NH_4^+-N/L$ after operating 18days. The reactor with CNBG implanted media had the highest $NH_4^+-N$ removal rate because of maintaining high concentration of Nitrifying Oxidizing Bacteria (NOM), and is regarded as an appropriate method for the activated sludge process.

• 건축역사연구
• /
• 제8권3호
• /
• pp.23-38
• /
• 1999

The purpose of this study is to analogize the appearance of Korean Ancient Architecture in view of the Stone Remains from 3 Kingdom Period to Unificated Shilla Period. But in these period, there is no building remains but some stupas and fine arts. Especially, there are many architectural appearance and revealing signature in these Historical Stone remains. Architectural elements which are analogized by stone remains what has value as historical materials by preservation of original form from 3 Kingdom Preiod to Unificated Shilla Period are as follows : 1) Platform, the representative characteristic of Korean traditional architecture, was frame structure and accumulate structure. And circular or square footing stood a same shape column on it is put on the platform. 2) In the case of column, there used entasis column and inclined column and circular chamfer technique was applied on the top side of it. Upper side of column, capital and head pentrating tie that small bearing block was put on the center of it was joined. And longitu야nal rest(長舌) supported a cross beam. Capital and small bearing block had no bottom heel, and heel side was curved and straight. Centered bracket structure was often used, and multi bracket structure is not used yet. Inward incline technique was used. 3) Inward opening pair door which had lintel, threshold, doorjamb was usually used, Fixing stone was used for structural safety, and circular handle and lock was used for decoration. Handrail was used on the edge of wooden floor for decorative effect and safety. 4) Square rafter and circular rafter were used in the same period and so did flying rafter. Double eaves and single eave were used in the same period but, single eave was usually used. In this period, square rafter was usually used. This would be studied more by comparing with Japanese wooden architecture. 5) Hipped roof was used and half-hipped roof was not used yet. In front of th hip, there are small sculpture called Jap-Sang(雜像), and windbell was hang on the end of the hip rafter. Concave roof tile, convex roof tile, round eaver tile, decorative tile at end of roof ridge were used. Lotus style was well used on the face of roof tile for decoration. From the results of this study, wooden architecture of Unificated Shilla period was simple compare to Koryo dynasty and Chosun dynasty but, it had some brilliant character. It was hard work that analogized the form of non-existent wood architecture of Ancient Korean period by restricted stone remains. But, in addition to the results of this study and research of old documentations, more study should be go on.

• 가정과삶의질연구
• /
• 제28권1호
• /
• pp.145-157
• /
• 2010

This is a study that explores the influence of self-differentiation and acculturation among married immigrant women on their feelings of marriage satisfaction by residential area. The aim was to verify the level of self-differentiation and acculturation that married immigrant women secure from multicultural marriage. To achieve this objective, the study widely distributed a questionnaire that targeted women who were participating in education and other services at health and family support centers, multi-cultural family support centers, general social welfare centers, immigrant women shelters, and Korean language classrooms which are located in Seoul, Gyeonggi, Chungcheong, Jeolla, and Gyeongsang. Data analysis involved frequency analysis, descriptive statistics, one-way-Anova, and multiple regression analysis. Based on the results of descriptive statistics, two factors, namely, (1)interpersonal-relation differentiation, a sub-scale of self-differentiation, and (2)marginalization, a sub-scale of acculturation, had the lowest average. In verifying its various hypotheses, the study achieved the following results. Firstly, among demographic characteristics, there was difference of the mean in the marriage period, average monthly income, the frequency of meetings with the married woman´s parents-in-law and her own parents, and the average cost of supporting the woman's parents-in-law and her own parents. Secondly, among demographic characteristics, the variable of influencing marriage satisfaction showed negative influence in the case of women dwelling in farming and fishing villages. This shows that women residing in cities whether small, medium or large have higher marriage satisfaction. Also, as a result of verifying whether self-differentiation has influence on marriage satisfaction, the element of interpersonal-relations differentiation had a negative influence on marriage satisfaction. Thirdly, as for influence of acculturation upon marriage satisfaction, the study showed that just integration, which is a sub-scale of acculturation had positive effect on marriage satisfaction. In other words, the study showed that the interpersonal-relation differentiation among the sub-scales of self-differentiation among married immigrant women had a negative influence, and that integration among the sub-scales in acculturation had a positive influence on marriage satisfaction. Based on these results, in order to increase interpersonal-relation differentiation, as well as marriage satisfaction among immigrant women, the study suggests the integration of the women's families with the nuclear and extended families in the communities where the women reside.

• 대한소아치과학회지
• /
• 제30권2호
• /
• pp.238-244
• /
• 2003

본 연구는 치면열구전색재의 충전량이 미세누출에 미치는 영향을 비교분석할 목적으로 실시되었다. 6개의 군으로 나누어 각각 다른 충전량, 치면 전처리, 충전재를 적용하여 미세누출 양상을 비교하였다. 60개의 제 3대구치를 3개의 군으로 나누어 각 군당 20개씩 시편을 구성하였다. 각 치아는 교합면을 두 부분으로 나누어 한 부위는 충전재의 폭이 1mm이하가 되도록 충전하고(1, 3, 5군), 나머지 한 부위는 2mm이상 되도록 충전을 하였다(2, 4, 6군). 1, 2군은 산처리후 Helioseal F로 치면열구전색을 실시하였고, 3, 4군은 산처리후 상아질 접착제로 치면 전처리한 후 Helioseal F로, 5, 6군은 유동성 복합레진인 Tetric Flow로 치면 열구전색을 실시하였다. 500회의 열순환 및 색소침투 후, 미세누출도를 관찰하고 비교분석하여 다음과 같은 결론을 얻었다. 1. 동일한 충전폭을 적용하였을 경우, 미세누출도는 5군<3군<1군과 6군<4군<2군의 순으로 나타났으나 유의한 차이는 아니었다(p>0.05). 2. 동일한 재료와 치면처리를 하되, 충전폭만을 달리한 군들, 즉 1군과 크군, 3군과 4군, 5군과 6군간의 미세누출도에서는 유의한 차이를 보였다(p<0.05). 3. 미세누출은 전색재의 물성, 상아질 접착제 전처리 여부 보다 전색재의 충전량에 더 많은 영향을 받았다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권14호
• /
• pp.5907-5912
• /
• 2015

Purpose: To evaluate and update evidence for prognostic effects of kidney-sparing (KS) management and nephroureterectomy (NU) for upper tract urothelial carcinomas. Materials and Methods: Pubmed, Embase and the Cochrane Library were retrieved for the identification of comparative studies of kidney-sparing procedure and nephroureterectomy for upper tract urothelial carcinoma prior to December 2014. The data were extracted independently by 2 reviewers and the quality of the included studies was assessed. Review Manager 5.3 and STATA 13 were used to perform the meta-analysis. Results: Twenty-three observational studies including 1,587 KS and 3,996 NU were evaluated. The results of the meta-analysis showed that nephroureterectomy had no significant benefit with regard to intravesical recurrence (IRFS), metastasis (MFS), cancer specific survival (CSS) and overall survival (OS) except the total tumor recurrence (RFS) when compared with kidney sparing management. The respectively pooled outcomes were HR 1.36 (0.69-2.68, P=0.38) for IRFS, 1.09 (0.59-2.01, P=0.78) for MFS, 1.17 (0.77-1.79, P=0.47) for CSS, 1.50 (0.90-2.48, P=0.12) for OS and 1.61 (1.03-2.51, P=0.04) for RFS. Conclusions: On the whole, kidney-sparing management had equivalent prognostic effect on upper tract urothelial carcinoma as the standard nephroureterectomy except in tumor recurrence. However, the results should be interpreted with caution for lack of stage and grade stratification and multi-center randomized controlled trials are still needed to verify our results.

• 벤처창업연구
• /
• 제15권5호
• /
• pp.203-220
• /
• 2020

본 연구의 목적은 창업가 웰빙의 중요성을 재조명하고, 이를 증진시킬 수 있는 방안을 모색하여 검증하고 제시하는데 있다. 먼저, 문헌연구를 통해 창업가 웰빙에 영향을 미치는 요인을 탐색하여, 긍정심리학의 배경에서 탄생한 긍정심리자본을 주요인으로 선정하였다. 그리고, 긍정심리자본과의 연관성이 예측되는 선행요인으로 진성리더십, 숙달목표지향성, 사회적지지를 선정하여 가설과 연구모형을 수립하였다. 수립된 모형의 실증적 분석을 위해, 청년창업사관학교 출신의 창업가들을 대상으로 설문조사를 실시하였다. 회수된 133부의 응답자료를 바탕으로 PLS구조방정식 분석과 다집단분석(PLS-MGA), 중요도-수행도 분석(IPMA)을 시행하였다. 실증분석결과, 긍정심리자본은 창업가의 웰빙과 매우 큰 인과관계가 있는 것으로 나타났고, 진성리더십과 숙달목표지향성은 긍정심리자본에 긍정적인 영향을 미치는 것으로 밝혀졌다. 하지만, 사회적지지의 영향에 대한 통계적 유의성은 검증되지 못했다. 창업초기와 성장기의 창업단계별 인과관계 차이는, 긍정심리자본의 하위요인에 대해서만 나타났는데, 세가지 선행요인들은 희망과 낙관주의에 대해서 각각의 유의한 차이를 나타냈다. 본 연구는 창업기업의 성과요인 규명 등에 편중되었던 국내 창업가정신 연구주제를 확장하였다. 창업기업의 핵심 주체인 '창업가'의 정신적 웰빙과 관련된 요인을 탐색하여 수립한 인과관계 모형을 실증적으로 검증했고, 이를 통해 창업가 및 연구자, 교육자에게 실무적 통찰력의 단서를 제시했다는 점에서 본 연구의 의의를 찾을 수 있을 것이다.

• 유통과학연구
• /
• 제13권3호
• /
• pp.61-67
• /
• 2015

Purpose - Exports have long been regarded as significant drivers of sustainable competitive advantage and growth among small and medium enterprises (SMEs). The export activities of SMEs are particularly important in the context of export-oriented economies such as Korea. Although many studies have examined the determinants of exports, it is difficult to find empirical studies about the determinants of the export performance of regional SMEs. This study investigates the determinants of export performance in the regional SME context based on an integrated approach that combines the environment factor of industrial organization theory, competitive strategy theory, and the competences of the resource-based view. Research design, data, and methodology - To empirically analyze the determinants of export performance in the regional SMEs, data were collected from firms in the Daegu metropolitan area. Data were collected directly through questionnaire surveys; in addition, secondary financial data were also taken from the KIS-VALUE database. Out of the 175 responses that were received, 143 were considered to be worth examining. After testing the reliability and validity of the variables through multiple items such as environmental turbulence and competitive strategy, hypotheses were verified by using five multi-regression models. These models were: a control model with organizational size and age, an environmental model with technology and market turbulence, a competency model with R&D and foreign distribution channels, a strategy model with product and market differentiation, and an integrated model including all of these variables. Results - First, as a control variable, the organization size has significant positive effects on export performance. Second, technology turbulence based on industrial organization theory has significant positive effects on export performance, but market turbulence does not affect export performance. Third, the foreign market distribution competency of the resource-based view has strong positive effects on export performance, but the R&D competency does not affect export performance. Fourth, the product differentiation strategy from competitive strategy theory positively impacts export performance, but market differentiation does not affect export performance. Finally, in the integrated model, only the foreign distribution competency of the resource-based view has a significant effect on export performance. Conclusions - The empirical results of this study verified the usefulness of the rationales behind the three theories to explain the export performance of the regional SMEs, especially the importance of the foreign market distribution competency from the resource-based view. With regard to practical considerations, this study's implications suggest that the use of technological environmental changes by industries is better than the use of market changes. Further, the use of the product differentiation strategy is more effective than the use of the market-driving strategy, and the distribution channel competency plays a stronger role than the technology-oriented competency with regard to the export performance position of regional SMEs. Future studies should examine relational perspectives, such as trust among channel partners. Therefore, the configuration approach is more useful in enhancing pragmatism by comparing high- and low-export companies.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권8호
• /
• pp.1085-1090
• /
• 2002

Genetic parameters for birth weights (BWT), calving ease scores observed from calves born by heifers (CEH), and calving ease scores observed from calves born by cows (CEC) were estimated using Bayesian methodology with Gibbs sampling in different threshold animal models. Data consisted of 77,458 records for calving ease scores and birth weights in Gelbvieh cattle. Gibbs samplers were used to obtain the parameters of interest for the categorical traits in two univariate threshold animal models, a bivariate threshold animal model, and a three-trait linear-threshold animal model. Samples of heritabilities and genetic correlations were calculated from the posterior means of dispersion parameters. In a univariate threshold animal model with CEH (model 1), the posterior means of heritabilities for calving ease was 0.35 for direct genetic effects and 0.18 for maternal genetic effects. In the other univariate threshold model with CEC (model 2), the posterior means of heritabilities of CEC was 0.28 for direct genetic effects and 0.18 for maternal genetic effects. In a bivariate threshold model with CEH and CEC (model 3), heritability estimates were similar to those in unvariate threshold models. In this model, genetic correlation between heifer calving ease and cow calving ease was 0.89 and 0.87 for direct genetic effect and maternal genetic effects, respectively. In a three-trait animal model, which contained two categorical traits (CEH and CEC) and one continuous trait (BWT) (model 4), heritability estimates of CEH and CEC for direct (maternal) genetic effects were 0.40 (0.23) and 0.23 (0.13), respectively. In this model, genetic correlation estimates between CEH and CEC were 0.89 and 0.66 for direct genetic effects and maternal effects, respectively. These estimates were greater than estimates between BWT and CEH (0.82 and 0.34) or BWT and CEC (0.85 and 0.26). This result indicates that CEH and CEC should be high correlated rather than estimates between calving ease and birth weight. Genetic correlation estimates between direct genetic effects and maternal effects were -0.29, -0.31 and 0.15 for BWT, CEH and CEC, respectively. Correlation for permanent environmental effects between BWT and CEC was -0.83 in model 4. This study can provide genetic evaluation for calving ease with other continuous traits jointly with assuming that calving ease from first calving was a same trait to calving ease from later parities calving. Further researches for reliability of dispersion parameters would be needed even if the more correlated traits would be concerned in the model, the higher reliability could be obtained, especially on threshold model with property that categorical traits have little information.

• 한국광물학회지
• /
• 제19권4호
• /
• pp.347-353
• /
• 2006

자연계에 존재하는 다양한 지구물질의 조성은 여러 성분들로 구성된 다성분계이므로 자연계의 현상을 이해하기 위해서는 이러한 다성분계 지구물질의 구조를 규명하는 것이 필수적이다. 이러한 중요성에도 불구하고 다성분계 비정질의 자세한 원자-나노 구조는 비정질 자체가 갖고 있는 여러 가지고유의 무질서도 등으로 인하여 최근까지도 정확히 알려지지 않았다. 본 연구에서는 일차원 O-17 MAS와 이차원 3QMAS NMR을 이용하여, 다성분계 비정질인 Ca-Na 알루미노규산염 $[(CaO)_x(Na_2O)_{1-x}]\;(A1_2O_3)_{0.5}(SiO_2)_6.\;CNAS)$의 자세한 원자단위의 조성에 따른 변화를 보고한다. 비정질 CNAS의 비연결 산소 (non-bridging oxygen, NBO) 중 Ca-NBO는 Na/Ca 비율이 증가함에 따라서 (Ca, Na)-NBO를 형성한다. 이는 비정질 CNAS 내에서 비연결산소와 Ca와 Na 간에 강한 상호작용이 있음을 지시한다. 연결산소인 경우(bridging oxygen, BO, Si-O-Si나 Si-O-Al)의 경우에도 Na/Ca 비율에 따라, 감소의 폭이 비연결 산소보다는 상대적으로 작지만 화학차폐(NMR chemical shift)가 선형적으로 감소한다. 비정질 규산염의 연결산소의 결합각과 결합길이의 분포에 의해 결정되는 위상무질서도(topological disorder)는 Ca 함량이 증가할수록 비선형적으로 증가한다. 이러한 결과들은 비정질 CNAS의 구조가 기존에 알려진 데로 비연결산소만이 Na와 Ca 같은 구조교란양이온(network modifying cation)에 의해 많은 영향을 받는 것이 아니라 연결산소도 이들 양이온에 의하여 영향을 받음을 지시한다 이에 따라 다양한 양이온세기가 비정질의 무질서도에 미치는 영향을 정리하였다.