• Journal of Korean Society of Steel Construction
• /
• v.25 no.4
• /
• pp.335-346
• /
• 2013

AASHTO LRFD and Korean Bridge Design Code (Limit State Design) specify to consider Truck and Lane load simultaneously determined from reliability-based live load model, and impact shall be applied to the truck load while it shall not be applied to the lane load. In this paper, vehicle-bridge interaction analysis under moving truck and lane loads were performed to estimate impact factor of the cables and girders for the selected multi-cable-stayed composite bridges with 230m, 400m and 540m main span. A 6-d.o.f. vehicle was used for truck load and a series of single-axle vehicles was applied to simulate equivalent lane load. The effect of damping ratio on the impact factor was estimated and then the essential parameters to impact factor, i.e., road surface roughness and vehicle speed were considered. The road surface roughness was randomly generated based on ISO 8608 and it was applied to the truck load only in the vehicle-bridge interaction analysis. The impact factors evaluated from dynamic interaction analysis were also compared with those by the influence line method that is currently used in design practice to estimate impact factor in cable-stayed bridge.

• Journal of the Korean Society of School Health
• /
• v.21 no.2
• /
• pp.119-134
• /
• 2008

Purpose: The purpose of this study is to understand a variety of intervention studies to prevent smoking by adolescents in U.S. and find out implications for Korea. Methods: This study reviewed articles found in the internet and analysed the data of US DHHS and CDC. Results: The School Health Policies and Programs Study (SHPPS) is a national survey periodically conducted to assess school health policies and programs of U.S. The main components of SHPPS are health education and physical education, health services, mental health and social services, school policies, and school environments. The CDC guidelines for school health programs to prevent tobacco use and addiction are composed of policy, instruction, curriculum, training, family involvement, tobacco-use cessation efforts, and evaluation. School-based interventions to prevent smoking can be classified into the categories of information-giving curricula, social competence curricula, social influence approaches, combined methods draw on social competence and social influence approaches and multi-modal programmes and Youth Empowerment study. The key programs for adolescent smoking prevention are ALERT Project, HSPP, TNT Project, MPP, NC YES. Conclusions: As smoking is often the first step of unhealthy behaviour such as alcohol drinking, illegal drugs, and violence, smoking prevention programmes for adolescents in U.S. have been comprehensive school-based health programs. In smoking prevention programs for adolescents, CDC plays a critical role by supporting survey, research, policy, and funds. The effectiveness of the programs was high when it was based on school and involved parents, community, and mass media. As the effect of each programme is not expected to last for a long time, consistent repetition of these interventions is essential. Current smoking prevention programs for adolescents are exploring the empowerment approach focused on the active involvement of participants rather than traditional approaches using order and discipline.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.4
• /
• pp.56-63
• /
• 1996

This study was to manufacture thinned wood of Larix leptolepis Gordon into Oriented Strand Board(OSB) with Urea-Formaldehyde Resin. The OSB was made of four kinds of strand in slenderness ratio 150 ; thickness $0.3{\pm}0.05mm$, $0.4{\pm}0.05mm$, $0.5{\pm}0.05mm$ and $0.6{\pm}0.05mm$, respectively length 45mm, 60mm, 75mm and 90mm. Target densities were 0.65gr/$cm^3$, 0.75gr/$cm^3$ and 0.85gr/$cm^3$. The stepwise 9 minutes-multi-pressing schedule in the maximum pressure 40kgf/$cm^2$, the minimum pressure 10kgf/$cm^2$ was applied for $400mm{\times}390mm{\times}12mm$ board at the temperature of $150^{\circ}C$ in a hot press. In MOR The OSB of thin strand thickness $0.3{\pm}0.05mm$(length 45mm) and density 0.85gr/$cm^3$ was the highest. The strand thickness had more effect on MOR than the strand length. In strand thickness $0.4{\pm}0.05mm$(length 60mm) and density 0.85gr/$cm^3$ was the highest MOE. The strand thickness and length had adverse effects on MOE each other. At internal bonding. The OSB of strand thickness $0.3{\pm}0.05mm$(length 45mm) and board density 0.75gr/$cm^3$ showed the highest value. OSB had higher IB value with thinner strand thickness. The thinner strand thickness showed the lower thickness swelling in turn $0.3{\pm}0.05mm$(length 45mm), $0.4{\pm}0.05mm$(length 60mm), $0.5{\pm}0.05mm$(length 75mm). $0.6{\pm}0.05mm$(length 90mm). Target densities 0.75gr/$cm^3$ 0.65gr/$cm^3$, 0.85gr/$cm^3$ showed in turn lower value. Finally, The OSB made of thinned wood of Larix leptolepis Gordon showed good results in laboratory experiment.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.2
• /
• pp.63-69
• /
• 2006

The methanolic (MeOH) extract of A. fruticosa bark, which showed immune-regulatory activities, was separated to purify an active compared by means of a multi-stage column chromatography. This resulted in the isolation and characterization of an isoflavone glycoside named 4', $6-Dimethoxyisoflavone-7-O-{\beta}-D-glucopyranoside$. Immuno-regulatory activities of the crude extract of Amorpha fruticosa LINNE bark were compared with that of an isoflavone glycoside (4', $6-dimethoxyisoflavone-7-O-{\beta}-D-glucopyranoside$). The crude methanolic extract of A. fruticosa and purified single compound showed 16% of relatively low cytotoxicity at a maximum concentration of 1.0 g/L in cultivated normal human lung cell line (HEL299). Cell growth of human T cells was increased up to 15%, 0.5 g/L of the crude extract added group. This was higher than a single compound added one. On the other hand, specific production rates of IL-6 and $TNF-{\alpha}$ from T cell were higher in the purified compound treat group ($0.82{\times}10^{-4}\;pg/cell$ and $1.08{\times}10^{-4}\;pg/cell$, respectively), compared to 0.5 g/L of the crude extract added group ($0.65{\times}10^{-4}\;pg/cell$ and $0.84{\times}10^{-4}\;pg/cell$, respectively). In addition, the growth of NK-92MI cells incubated with the crude extract was higher up to 56% over the cells grown with a single compound (0.5 g/L). In overall, the crude extract showed relatively higher immuno-regulatory activities compared with a single compound, probably due to the synergic effect given by other substances existed in the crude extract. Even though the siolated compound stimulated higher secretion of cytokines from human T cells.

• Korean Journal of Microbiology
• /
• v.43 no.1
• /
• pp.47-53
• /
• 2007

The DY1 strain of Gram-positive, rod-shaped bacteria was isolated from the soil sample collected from Daeam mountain, Korea. The culture filtrate of DY1 strain showed a broad spectrum of antimicrobial activity on various pathogenic and food poisoning enteric bacterial species tested in vitro. It showed significant growth-inhibitory effect on Salmonella enterica sp., Shigella sp., pathogenic Escherichia coli, Vibrio cholerae, Vibrio parahemolyticus, and Yersinia enterocolitica. For the identification of the DY1 strain, morphological, biochemical and molecular phylogenetic approaches were performed. The DY1 strain was found to be a member of the genus Paenibacillus on the basis of morphological and biochemical analyses. The 16S rDNA of DY1 showed the highest pairwise identity with Paenibacillus polymyxa with 99.79% (1,413 bp/1,416 bp). The antimicrobial entity from DY1 looked different from preciously reported ones and seems to have a great potential to be further studied as a candidate of new antibiotics to control multi-drug resistant pathogens.

• Journal of Food Hygiene and Safety
• /
• v.15 no.3
• /
• pp.241-247
• /
• 2000

The incidence of verotoxin-producing Escherichia coli(VTEC) was surveyed in domestic foods including hamburger, raw meats and vegetables from 1997 to 1999. The molecular biological characteristics of the isolates were analyzed. Three VTEC strain were isolated from 1,700 samples. Serotypes of those isolates were 0157 : H7, 026 H4, and 056 : Hl2, respectively. Serotype O26 : H4 produced VT I and VT II, and 055 Hl2 isolate produced VT I, however the 60 MDa plasmid DNA and eae gene were not found from both strains. One 0157 : H7 isolate produced VT II and harbour 60 MDa plasmid DNA, however eae gene was not found in the strain. Although they produced VT, it seemed that the virulence of two strains were relatively weak because of the lack of the eae gene. In addition, the serotype O157 : H7 isolate resistant to ampicillin and streptomycin, while isolates of serotype O26 : H4 and O55 : Hl2 were multi-resistant to antibiotics including ampicillin, carbenicillin , cephalothin, trimethoprim/sulfamethoxazole and tetracycline. Supernatants of cultures of all three isolates were showed cytotoxic effect to vero and HeLa cell

• Korean Journal of Environment and Ecology
• /
• v.24 no.5
• /
• pp.591-600
• /
• 2010

We estimated and compared C storages and annual $CO_2$ uptakes by 9 dominant tree species planted along the streets. DBH and age by tree species were measured in the sites selected considering the planting status and distributions of tree species, and biomass, C storage, growth rate, and annual $CO_2$ uptake were estimated for each species. As a result, L. tulipifera, M. glyptostroboides, P. occidentalis were classified into fast-growing group, P. serrulata, G. biloba, Z. serrata, S. japonica, A. palmatum showed intermediate growth rates, and P. densiflora was slow-growing. Average C storage per tree was 205kgC/tree and ranged from 518kgC/tree(L. tulipifera) to 41kgC/tree(P. densiflora). Average annual $CO_2$ uptake by urban street trees over their lifespan ranged from $7.6kgCO_2$/tree/y to $99.1kgCO_2$/tree/y and L. tulipifera was the greatest, followed by glyptostroboides and P. occidentalis, and P. densiflora was the lowest. Total annual $CO_2$ uptake by all street trees in Gyeonggi-do, estimated based on the annual $CO_2$ uptake by each species, was as small as approximately 0.67% of that by forest in Gyeonggi-do. However, urban trees are still important because forest area continues to decrease and urbanization occurs annually in Gyeonggi-do, and should be managed considering their multi-functional aspects, including mitigation of heat island effect and building energy saving(indirect $CO_2$ uptake).

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.235-235
• /
• 2003

The development of a buffer layer is an important issue for the second -generation wire, YBCO coated metal wire. The buffer layer demands not only on the prohibition of the reaction between YBCO and metal substrate, but also the proper lattice match and conductivity for high critical current density (Jc) of YBCO superconductor, In order to satisfy these demands, we suggested CaRuO3 as a useful candidate having that the lattice mismatches with Ni (200) and with YBCO are 8.2% and 8.0%, respectively. The CaRuO3 thin films were deposited on Ni substrates using various methods, such as e-beam evaporation and DC and RF magnetron sputtering. These films were investigated using SEM, XRD, pole-figure and AES. In e-beam evaporation, the deposition temperature of CaRuO3 was the most important since both hi-axial texturing and NiO formation between Ni and CaRuO3 depended on it. Also, the oxygen flow rate had i[n effect on the growth of CaRuO3 on Ni substrates. The optimal conditions of crystal growth and film uniformity were 400$^{\circ}C$, 50 ㎃ and 7 ㎸ when oxygen flow rate was 70∼100sccm In RF magnetron sputtering, CaRuO3 was deposited on Ni substrates with various conditions and annealing temperatures. As a result, the conductivity of CaRuO3 thin films was dependent on CaRuO3 layer thickness and fabrication temperature. We suggested the multi-step deposition, such as two-step deposition with different temperature, to prohibit the NiO formation and to control the hi-axial texture.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.12
• /
• pp.1258-1268
• /
• 2014

In this paper, we propose and design IBFD system based on DCR. And then, we analyze effect of DC offset by self-interference in the proposed system. Also, we evaluate BER performance of the proposed system according to DC offset. As a result of the simulation, we can confirm that when the self-interference is not completely cancelled by the RF cancellation, linearity of desired signal and self-interference is distorted by DC offset. Also, in the proposed system using m-QAM modulation, DC offsets of multi-level are caused by self-interference with m-QAM modulation. As a result, constellations of desired signal and self-interference are greatly distorted. In contrast, in the proposed system using m-PSK modulation, DC offset of single level is caused by self-interference with m-PSK modulation. In this condition, we confirm that distortion of constellations of desired signal and self-interference is less than when using m-QAM modulation. That is, we can confirm that m-PSK modulation is effective than m-QAM modulation in DCR based IBFD system. Also, we can confirm that it is important to cancel self-interference as much as possible in RF-stage.

• Journal of the Korean earth science society
• /
• v.35 no.1
• /
• pp.29-40
• /
• 2014

A DC resistivity survey was performed to detect anomalies beneath concrete pavement. A set of high conductive media and planar electrodes were used to lessen the effect's a high contact resistance of concrete. Results of the resistivity survey were analyzed and compared with those of other geophysical surveys such as Ground Penetration Radar (GPR), Impulse Response (IR), and Multi-channel Analysis of Surface Waves (MASW), which were carried out in the same location. The results of resistivity survey showed a high resistive distribution in the section of sink and pavement where a pattern of reinforcement was observed through the GPR survey. Also, a comparison of results between the IR and resistivity surveys indicated that the high resistivity was produced by the high dynamic stiffness in the reinforced section. The co-Kriging of both the results of DC resistivity and MASW surveys at the same location showed that an integrated geostatistical analysis is able to give more accurate description on the anomalous subsurface region than can a separate analysis of each geophysical approach. This study suggests that the integrated geostatistical approaches were used for a decision-making process based on the geophysical surveys.