• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.597-599
• /
• 2010

In this paper, by considering the real UWA channel environments, the measured channel data is used to generate the UWA channel model and calculate the relative parameters for underwater OFDM systems. Practical least square (LS) based channel estimation with linear interpolation are adopted to obtain the channel state information (CSI) at receiver side. As multi-input multi-output (MIMO) processing techniques, Alamouti code is implemented and evaluated to perform for space time block coding (STBC) and space frequency block coding (SFBC) for UWA OFDM systems with the MIMO configuration of $2{\times}1$, at the same time, $1{\times}2$ maximum ratio combining (MRC) is performed for the purpose of comparison. The simulation results show that, with perfect channel estimation, SFBC failed to work duo to the serious frequency selectivity of UWA channel environments. When the practical channel estimation is applied, in the case of STBC, the proposed 4-column pilot pattern gives better performance about 7dB than SISO system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7A
• /
• pp.682-687
• /
• 2010

The IEEE 802.15.4a specification targets the low-rate (LR) Impulse-radio (IR) ultra-wideband (UWB) system which is now widely applied in the WPANs considering rather short distance communications with low complexity and power consumption. The physical (PHY) layer uses concatenated coding with mixed binary phase-shift keying and binary pulse-position modulation (BPSK-BPPM), and direct sequence spreading with time hopping in order that both coherent and non-coherent receiver architectures are supported. In this paper, the performances of multiple access schemes compliant with IEEE 802.15.4a specification are investigated with energy detection receiver, which allow avoiding the complex channel estimation needed by a coherent receiver. However, the performance of energy detection receiver is severely degraded by multi-user interference (MUI), which largely diminishes one of the most fascinating advantages of UWB, namely robustness to MUI as well as the possibility to allow parallel transmissions. So as to improve the performance of multiple access schemes, we propose to apply the novel TH sequences as well as to increase the number of TH positions. The simulation results show that our novel multiple access schemes significantly improve the performance against MUI.

• International Journal of Contents
• /
• v.12 no.1
• /
• pp.65-69
• /
• 2016

Wireless communication chipsets have fixed transmission rate and communication distance. Although there are many kinds of chipsets with throughput and distance purpose, they cannot support various types of wireless applications. This paper provides theoretic research results in order to support various wireless applications requiring different throughput, delayed quality-of-service (QoS), and different communication distances by using a wireless communication chipset with fixed rate and transmission power. As a performance metric, the probability for a data frame that successfully receives at a desired receiver is adopted. Based on this probability, the average number of transmission in order to make a successful frame transmission is derived. Equations are utilized to analyze the performance of a single-hop with channel coding and a dual-hop without error correction matter transmission system. Our results revealed that single-hop transmission assisted by channel coding could extend its communication distance. However, communication range extending effect of the single-hop system was limited. Accordingly, dual-hop transmission is needed to overcome the communication distance limit of a chipset.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.12
• /
• pp.69-75
• /
• 2004

In the paper, system is combined multiband system with DS-UWB techniques with properties including low peak-to-average power ratio, robustness to multiuser interference and excellent security. Because each sub-band is not satisfied with coherence bandwidth, rake receiver in each sub-band is applied to the Proposed system receiver. Output of rake receiver is combined by using Maximal Ratio combining technology. In this paper we mathematically analyse the BER of the DS-UWB system with singleband and multiband systems in the narrow interference channel condition and multi user interference channel condition, the simulation results show that proposed scheme is getting robuster with increasing of the number of subbands.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.10
• /
• pp.2095-2100
• /
• 2012

In this paper, we propose the channel sounding scheme which is made for ideal communication between some application as well as the short distance of high speed data transmission in MIMO-OFDM system for Wireless PAN. This method is able to perceive the duration of the impulse response through the delaying of power delay profile, modeled a power delay profile which has an attenuate characteristic, and obtained the coefficient of channel response by ML (maximum likelihood). Through the amplitudes, phases and delays associated with each multipath component which were acquired from this channel sounding scheme, we can describe the wave propagation characteristics of channels between the transmitter and receiver so that the receiver could enhance not only the reliability but also the ability of communication link. Multi agent system models can be used to analyze the path of the system within any time frame. Further, parameter values can be perturbed to examine how the path of the system changes in response to exogenous shocks.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.8
• /
• pp.2923-2943
• /
• 2021

The double helix structure of DNA makes it diverse, stable and can store information with high density, and these characteristics are consistent with the requirements of molecular communication for transport carriers. In this paper, a specific structure of molecular communication system based on DNA length coding is proposed. Transmitter (Tx) adopts the multi-layer golden foil design to control the release of DNA molecules of different lengths accurately, and receiver (Rx) adopts an effective and sensitive design of nanopore, and the biological information can be converted to the electric signal at Rx. The effect of some key factors, e.g., the length of time slot, transmission distance, the number of releasing molecules, the priori probability, on channel capacity is demonstrated exhaustively. Moreover, we also compare the transmission capacity of DNA-based molecular communication (DNA-MC) system and concentration-based molecular communication (MC) system under the same parameter setting, and the peak value of capacity of DNA-MC system can achieve 0.08 bps, while the capacity of MC system remains 0.025 bps. The simulation results show that DNA-MC system has obvious advantages over MC system in saving molecular resources and improving transmission stability.

• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.3
• /
• pp.125-134
• /
• 2014

This paper proposes a multi-agent message transport architecture to support application areas which need fast message communications for close collaboration among agents. In the FIPA(Foundation of Intelligent Physical Agents) agent platform, all message transfer services among agents are in charge of a conceptual entity named ACC(Agent Communication Channel). In our multi-agent message transport architecture, the ACC is represented as a set of system agents named MTSA(Message Transfer Service Agent). The MTSA enables close collaboration among agents by supporting asynchronous communication, by using Reactor pattern to handle agent input messages efficiently, and by selecting optimal message transfer protocols according to the relative positional relationships of sender agents and receiver agents. The multi-agent framework SMAF(Small Multi-Agent Framework), which is implemented on the proposed multi-agent message transport architecture, shows better performance on message transfer among agents than JADE(Java Agent Development Environment) which is a well-known FIPA-compliant multi-agent framework. The faster the speed of message transfer of a multi-agent architecture becomes, the wider application areas the architecture can support.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.2
• /
• pp.169-174
• /
• 2008

In this study we develop core technology of Multi-Charmel Voice Guidance System based on active 2.45GHz RFID that can be used in the field of advertising. Through this, we can service more familiar with voice information to foreigners by own language in large scale international event. As an alternative to the current high-expensive voice guidance system in exhibition hall and provide more value added services to user. As the result, we present the configuration of integrated software platform which include media server, media client and receiver. It can be as a basis infra equipment for a signtseeing in RFID/USN environment. Additionally through tag information analysis about exposure of advertisement that is collected late, supposed system may achieve role as a new marketing tool.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.6
• /
• pp.257-262
• /
• 2010

In this paper, we propose an effective method for detecting signals among multi-user in cooperative communication system. Spread sequence is inserted to NULL space of synchronization channel to synchronize between each user among frame formats of the cooperative communication and then transmitted. In the receiver, the wanted signal is detected by using correlation among the inserted spread sequences. As simulation results, correlations among the signals using m-sequence in AWGN, Rician, and Rayleigh channel are shown. Using the simulation results in this paper, we expect a reliable cooperative communication.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.65-70
• /
• 2013

In this paper, we propose a multi-hop cooperative transmission protocol to obtain energy savings in static wireless networks. Each terminal in the network is equipped with a single antenna and each receiver uses equal gain combining technique (EGC) to combine received signals. We also propose a power allocation strategy which optimizes the total transmit power at each stage. Monte-Carlo simulations are presented to evaluate and compare performance of the proposed protocol with the multi-hop direct transmission (MDT) and the cooperative routing protocol proposed by Khadani [8], in terms of the average total transmit power and the average number of required stages.