• Economic and Environmental Geology
• /
• v.29 no.5
• /
• pp.639-660
• /
• 1996

The lowest formation of the Cretaceous Gyeongsang Supergroup, the Nakdong Formation, unconformably overlies the gneiss complex basement in Hadong, Gyeongsangnam-do and Gwangyang, Chullanam-do. The Nakdong Formation of the study area is 500-600 m thick and occurs as a belt shape. Based upon lithology, sedimentary structure, and bedding geometry the formation consists of three conglomerate facies (Gd, Gn, Gic), five sandstone facies (Sh-n, Sh-i, Sp, Sr, Sm), and four mudstone facies (Mf, Mfn, Mc, Mv). Sandstone facies are the most prominent in the study area. The twelve facies can be grouped into five facies associations. The depositional settings are elucidated from analyses of 12 facies and five facies associations of the formation. The lower part of the Nakdong Formation was deposited in alluvial plain, and the middle and upper parts were in a riverine system. The lithologies of the Nakdong Formation of the Gyeongsang Basin have been considered to consist of generally conglomerates and pebbly sandstones that were accumulated in alluvial fans. But the common lithology of the study area is sandstone which was formed in lower part of alluvial fan or fluvial setting. It is supposed that the coarser sedimentary sequence distributed west to the study area should be eroded out after deposition and early uplift, and the finer sandstone sequence in the east remains behind. The mineral composition of sandstones and the clast composition of conglomerates indicate that the Nakdong Formation was derived mainly from the metamorphic source rocks. Some reworked intraclasts were also supplied from the intrabasinal sedimentary layers. Paleocurrent data collected from cross-beddings, ripple marks, asymmetric sand dune suggest that most sediments were transported from north to south during the Nakdong Formation time.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.3
• /
• pp.201-214
• /
• 1994

The fracture process zone in concrete is a region ahead of a traction-free crack, in which two major mechanisms, microcracking and bridging, play important roles. The toughness due to bridging is dominant compared to toughness induced by microcracking, so that the bridging is dominani: mechanism governing the fracture process of concrete. Fracture mechanics does work for concrete provided that the fracture process zone is being considered, so that the development of model for the fracture process zone is most important to describe fracture phenomena in concrete. In this paper the bridging zone, which is a part of extended rnacrocrack with stresses transmitted by aggregates in concrete, is modelled by a Dugdale-Barenblatt type model with linear tension-softening curve. Two finite element techniques are shown for the analysis of progressive cracking in concrete based on the discrete crack approach: one with crack element, the other without crack element. The advantage of the technique with crack element is that it dees not need to update the mesh topology to follow the progressive cracking. Numerical results by the techniques are demonstrated.

• Geophysics and Geophysical Exploration
• /
• v.7 no.1
• /
• pp.14-18
• /
• 2004

High levels of ambient noise and safety factors often limit the use of 'active-source' seismic methods for geotechnical investigations in urban environments. As an alternative, shear-wave velocity-depth profiles can be obtained by treating the background microtremor wave field as a stochastic process, rather than adopting the traditional approach of calculating velocity based on ray path geometry from a known source. A recent field test in Melbourne demonstrates the ability of the microtremor method, using only Rayleigh waves, to resolve a velocity inversion resulting from the presence of a hard, 12 m thick basalt flow overlying 25 m of softer alluvial sediments and weathered mudstone. Normally the presence of the weaker underlying sediments would lead to an ambiguous or incorrect interpretation with conventional seismic refraction methods. However, this layer of sediments is resolved by the microtremor method, and its inclusion is required in one-dimensional layered-earth modelling in order to reproduce the Rayleigh-wave coherency spectra computed from observed seismic noise records. Nearby borehole data provided both a guide for interpretation and a confirmation of the usefulness of the passive Rayleigh-wave microtremor method. Sensitivity analyses of resolvable modelling parameters demonstrate that estimates of shear velocities and layer thicknesses are accurate to within approximately $10\%\;to\;20\%$ using the spatial autocorrelation (SPAC) technique. Improved accuracy can be obtained by constraining shear velocities and/or layer thicknesses using independent site knowledge. Although there exists potential for ambiguity due to velocity-thickness equivalence, the microtremor method has significant potential as a site investigation tool in situations where the use of traditional seismic methods is limited.

• Journal of the Korean Society for Railway
• /
• v.12 no.2
• /
• pp.183-189
• /
• 2009

The track structure of Gyungbu High Speed Railway line from Daegu to Busan is concrete track. It has a very strict specification for residual settlement because of its rigid type structural characteristics. The residual settlement of it comes from the residual settlement of the subgrade and the ground. The residual settlement of railway subgrade composed of crushed rock and soil might be major parts of total residual settlement depending on the field compaction qualities. Therefore, it is a key to minimize the residual settlement of the subgrade for a successful concrete track construction. In this paper, total 31 large scale compaction tests were performed to understand the compaction behaviors of the crushed rock-soil mixture. The test specimens were constituted with soil, crushed shale and mudstone taken from two sites under construction. The compaction tests were performed with the variations of rock types, #4 sieve passing contents, maximum particle size, and moisture contents. The influence of those factors on maximum dry unit weights of crushed rock-soil mixture was evaluated.

• Journal of the Korean Society of Earth Science Education
• /
• v.8 no.2
• /
• pp.128-138
• /
• 2015

The purpose of this study is to examine potential as a geological field course of Odongdo located to the east of Yeosu city, Korea. The total area and the height from the sea level of Odongdo is about 0.13km2 and 42m, respectively. Odongdo area belongs to the Hallyeohaesang National Marine Park, and is famous for rock scenery in the rocky coast and living of rare plants. For this study, diversity of geomorphology and geology was investigated at the sites called as dragon cave, windy area, seal rocks, sunrise viewing platform, second seashore rocks and first seashore rocks along the coast of Odongdo. The results of this study are as follows: A lot of geomorphological and geological resources like sea cliff, sea cave, strata, various sedimentary rocks(conglomerate, sandstone, mudstone), andesite, fault and examples of rock weathering were found in the rocky coast of the study area. These field resources are pertinent to the field work materials for the teaching and learning of geology units in elementary school science. Odongdo is to be recommended as a site of outdoor geological field course for the elementary school students inhabited in Yeosu city and neighborhood area because each site of the rocky coast in this study area has various field work materials and the wide space for observe activities, and is equipped with the facilities as a trail for rock observation.

• Economic and Environmental Geology
• /
• v.18 no.2
• /
• pp.177-184
• /
• 1985

The carbonate flat pebble conglomerates (CFPC) are interbedded as lenticular bed in the greenish rhythmite of the upper part of $Hwaj{\check{o}}l$ Formation, $Jos{\check{o}}n$ Supergroup. Pebbles are composed mainly of lime-mudstone with small amounts of bioclasts and silt-sized subangular quartz grains. The matrix among pebbles is composed mainly of sparry calcite with relatively much amounts of bioclasts, silt-sized subangular quartz grains and authigenic pyrite crystals or grains. The sparry calcite of the matrix seems to be the results of neomorphism of skeletal sands and bioclasts. The pebbles are well rounded and no plastic deformations are found. Some pebbles show the outer rim of glauconite. CFPC are not associated with any other intertidal features such as stromatolites, flaser bedding and channel structures. Also any features indicative of subaerial exposure such as dessication cracks, fenestrae and so on are not found in the bed. The sedimentological features of CFPC suggest that the following conditions appear to have been necessary for the formation of CFPC : 1) episodic deposition of thin, permeable calcareous beds separated argillaceous beds; 2) preservation of these beds near the sediment-water interface where they could become rapidly cemented; 3) erosion and redeposition of the partially lithified beds by storms or other exceptional erosional events. Eventually storm erosion and redeposition together represent only one of several critical conditions in the genesis of CFPC. The CFPC are very common in Cambrian and lower Ordovician formations, and become very rare in the younger carbonate formations. The expansion of infauna after Ordovician Period eliminated the widespread potential for rapid submarine cementation which is one of the critical factors to form CFPC.

• Earthquakes and Structures
• /
• v.17 no.4
• /
• pp.411-424
• /
• 2019

In this study, a numerical model of a shield tunnel with an assembled segmental lining was built. The seismic response of the segmental lining of the section of the shield tunnel in Line 1 of the Chengdu Metro is analyzed as it passes through the interface of sand-cobble and mudstone layers. To do so, the node-stress seismic-motion input method was used to input the seismic motion measured during the 2008 Wenchuan earthquake, and the joint openings and dislocations associated with the earthquake action were obtained. With reference to the Ethylene-Propylene-Diene Monomer (EPDM) sealing gaskets used in the shield tunnels in the Chengdu Metro, numerical simulation was applied to analyze the contact pressure along the seepage paths and the waterproof property under different joint openings and dislocations. A laboratory test on the elastic sealing gasket was also conducted to study its waterproof property. The test results accord well with the numerical results and the occurrence of water seepage in the section of the shield tunnel in Line 1 of the Chengdu Metro during the 2008 Wenchuan earthquake was verified. These research results demonstrate the deformation of segmental joint under earthquake, also demonstrate the relationship between segmental joint deformation and waterproof property.

• Geomechanics and Engineering
• /
• v.24 no.5
• /
• pp.471-478
• /
• 2021

Water damage is one of the five disasters that affect the safety of coal mine production. The erosion of rocks by water is a very important link in the process of water inrush induced by fault activation. Through the observation and experiment of fault filling samples, according to the existing rock classification standards, fault sediments are divided into breccia, dynamic metamorphic schist and mudstone. Similar materials are developed with the characteristics of particle size distribution, cementation strength and water rationality, and then relevant tests and analyses are carried out. The experimental results show that the water-rock interaction mainly reduces the compressive strength, mechanical strength, cohesion and friction Angle of similar materials, and cracks or deformations are easy to occur under uniaxial load, which may be an important process of water inrush induced by fault activation. Mechanical experiment of similar material specimen can not only save time and cost of large scale experiment, but also master the direction and method of the experiment. The research provides a new idea for the failure process of rock structure in fault activation water inrush.

• Journal of the Korean Geotechnical Society
• /
• v.22 no.8
• /
• pp.63-72
• /
• 2006

In the ASTM and ISRM, an uniaxial compressive strength(${\sigma}_{c}$) has been estimated to be 23(ASTM) or $20{\sim}25$(ISRM) times of point load strength index using a diametral test regardless of the rock rating or geological conditions. This paper presents a relationship between $I_{s}$ and ${\sigma}_{c}$ of a weak sedimentary rocks on Ulsan of the Kyung-Sang Basin in Korea. In the results of 291 for ${\sigma}_{c}$ test and 2310 for $I_{s}$ test from 77 spots, the predicted errors of ${\sigma}_{c}$ determined by strength ratio of ${\sigma}_{c}/I_{s}$ have been relatively less than those determined by linear regression analysis. And in case of weak sedimentary rocks such as mudstones, shales and sandstones, ${\sigma}_{c}$ should be lower than those suggested by ISRM and ASTM.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.7
• /
• pp.25-36
• /
• 2010

Tertiary unconsolidated mudstones spread throughout the eastern coast area. The demand for high quality filling materials in these areas is increasing due to harbors and large-scale residential land development. Rock produced in-situ or near site has been used as road subbase construction or reclamation materials for economical reason, but it is hard to decide appropriateness of quality specification because of its characteristics. The test results showed that unconsolidated rocks are diversely considered according to a different method of the applied geotechnical investigation. Therefore, the site of tertiary unconsolidated mudstones, the classification of rock and evaluation of rock properties that must be evaluated by objective criteria and apply a different set of criteria are needed. In addition, the environmental impact must be considered due to acid mine drainage.