• The Journal of the Acoustical Society of Korea
• /
• v.28 no.3
• /
• pp.229-238
• /
• 2009

This paper describes a sound engine of Korean traditional instruments, which are the Gayageum and Taepyeongso, by using a TMS320F2812. The Gayageum and Taepyeongso models based on commuted waveguide synthesis (CWS) are required to synthesize each sound. There is an instrument selection button to choose one of instruments in the proposed sound engine, and thus a corresponding sound is produced by the relative model at every certain time. Every synthesized sound sample is transmitted to a DAC (TLV5638) using SPI communication, and it is played through a speaker via an audio interface. The length of the delay line determines a fundamental frequency of a desired sound. In order to determine the length of the delay line, it is needed that the time for synthesizing a sound sample should be checked by using a GPIO. It takes $28.6{\mu}s$ for the Gayageum and $21{\mu}s$ for the Taepyeongso, respectively. It happens that each sound sample is synthesized and transferred to the DAC in an interrupt service routine (ISR) of the proposed sound engine. A timer of the TMS320F2812 has four events for generating interrupts. In this paper, the interrupt is happened by using the period matching event of it, and the ISR is called whenever the interrupt happens, $60{\mu}s$. Compared to original sounds with their spectra, the results are good enough to represent timbres of instruments except 'Mu, Hwang, Tae, Joong' of the Taepyeongso. Moreover, only one sound is produced when playing the Taepyeongso and it takes $21{\mu}s$ for the real-time playing. In the case of the Gayageum, players usually use their two fingers (thumb and middle finger or thumb and index finger), so it takes $57.2{\mu}s$ for the real-time playing.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.4
• /
• pp.53-61
• /
• 2000

능동 제어기를 설계하기 위해서는 제어대상 구조물의 수학모델의 구해야한다. 그러나, 무한차원의 구조물에 대하여 정확한 모델을 구하는 것은 불가능하므로 유한차원인 저차원화된 모델을 사용하여 제어기를 설계한다. 그러나, 실제 구조물과 저차원화된 모델사이의 오차에 의하여 제어기의 성능이 저하가 되면 제어기와 구조물의 상호작용, 지진과 같은 오란 등의 불확실성, 지진시 구조물의 동적 특성 변화로 인하여 제어기의 성능이 더욱 저하가 된다. 이러한 저하 요인은 제어기 설계시 요구되는 구조물의 수학모델에 대한 불확실한 요소로 작용하기 때문에 제어성능의 저하를 일으키며 응답의 불안정을 유발하기로 한다. 본 연구에서는 질량형 능동제어기(AMD)가 설치된 3층 건물 모형의 모델 오차에 관한 불확실성을 반영한 강인제어기법을 적용하여 제어성능과 안정성을 실험을 통하여 분석하였다. 강인제어 기법인 $\mu$ 합성법에 요구되는 여러 가지 가중함수인 주파수필터는 건물과 AMD의 특성, 모델 오차, 제어율과 AMD 성능의 , 측정잡음 및 지진외란의 특성 등을 고려하여 정량적으로 선택되었다. $\mu$합성법에 의하여 제어기를 설계하였으며 강인성을 비교하기 위하여 불확실성이 고려되지 않는 LQG 기법에 의한 제어기를 선택하였다. $\mu$합성법은 규정된 불확성에 대하여 제어의 강인성을 가지므로 동적특성이 바뀐 건물모형에 관한 강인성을 LQG 기법에 의한 제어성능과 비교하였다. 그 결과 동적특성이 변화된 건물에 대하여 $\mu$합성법만이 제어의 효율성이 유지되는 강인성을 나타내었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.62-70
• /
• 2018

In this study, we synthesized Oligo Peptide (Lys-Val-Ala-Arg-Pro: KVARP) and peptide derivatives using Solid Phase Peptide Synthesis(SPPS). KVARP was commonly known to improve whitening of skin. We measured bio-activity of the synthesized compounds. The whitening effect was measured in tyrosinase inhibition and the result showed to be highly effective with 93% inhibition rate at $5000{\mu}g/m{\ell}$ of Geranic-KVARP, on the other hand the IC50 value was $68{\mu}g/m{\ell}$. The wrinkle-reducing effect was measured by elastase inhibition at a concentration of 63% at $400{\mu}g/m{\ell}$ of Salicylic-KVARP, and the IC50 value was $253{\mu}g/m{\ell}$. In the DPPH assay, Caffeic-KVARP showed more than 95% antioxidant activity at $400{\mu}g/m{\ell}$ with high concentration and IC50 value was $31{\mu}g/m{\ell}$. The anti-inflammatory effect of Nitric Oxide inhibition was 67% at $400{\mu}g/m{\ell}$ of Lipoic-KVARP. Therefore, the four types of KVARP derivative that were synthesized from various experiments has shown that it could have potential to be used to develop new medicines, cosmetics as well as in various industries.

• The Korean Journal of Pesticide Science
• /
• v.2 no.1
• /
• pp.18-23
• /
• 1998

In order to obtain leading compound for the development of new pesticide through the organic synthesis of natural products, the synthesis of ricinine, an active compound of Ricinus communis, was established and biological activities of synthetic compounds against insects were examined. The synthetic scheme of ricinine was composed of four steps by the spontaneous condensation of the cyanoacetyl chloride. A modified synthetic process was also estabilshed to enhance the synthetic yield by simple cyclization of ethoxymethylene malononitrile. In the bioassay results of synthetic ricinine and intermediates on four insects, the mortality of ricinine on brown planthopper (BPH, Nilaparvata lugens) and pea weevil(PW, Bruchus rufimanus) was 80% and 75% at the concentration of 1,000 ${\mu}g/ml$ respectively. Chloronorricinine and chlororicinic acid having chloride group in molecular structure gave 60% mortality on two-spotted mite (TSSM, Tetranychus urticae) at the concentration of 500 ${\mu}g/ml$. The mortality of compounds on house mosquito (HM, Culex pipens pallens) was meager at 10 ${\mu}g/ml$ level.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.6
• /
• pp.936-940
• /
• 2004

Doenjang (Korean soy paste) is one of the popular soybean based fermented foods in Korea. This study investigated the growth and DNA synthesis inhibitory effect of doenjang methanol extracts on AGS human gastric adenocarcinoma cells, Hep 3B human hepatocellular carcinoma cells and HT-29 human colon cancer cells. In order to determine an anticancer effect of doenjang methanol extracts, other soybean fermented foods and original materials were compared. The treatment of doenjang methanol extracts (200 $\mu\textrm{g}$/mL) to the AGS, Hep 3B and HT-29 cancer cells inhibited the growth of cancer cells by 80%, 77% and 86%, respectively. Compared to other soybean fermented foods and original materials, doenjang methanol extracts showed the highest growth inhibitory effect on different cancer cells. In addition, doenjang methanol extracts (200 $\mu\textrm{g}$/mL) significantly inhibited DNA synthesis of AGS and Hep 3B cancer cells by 76% and 59%, respectively. These results suggested that this anticancer effect of doenjang may be due to specific active compounds, which will be newly produced during soybean fermented process and not contained in soybean.

• Journal of Sensor Science and Technology
• /
• v.7 no.6
• /
• pp.446-451
• /
• 1998

Recently, conductive polymer is known to be direct-drive active material which can convert electrical energy directly into mechanical energy. In this paper, the polymerized thickness of polypyrrole is measured with change of polymerization conditions and the mechanical bending is analyzed for various polymerized thickness. In order to detect of mechanical bending, bending beam method using the bridge shaped sample is used. Thickness of polypyrrole is proportional to polymerization time in fixed current density. Also it shows a linear relation with the applied current except high current density. Maximum displacement appears at the thickness of $18.35{\mu}m$ which has been polymerized at $5.4{\mu}A/mm^2$ and for 120min and actuated at the frequency of 0.1Hz.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.6
• /
• pp.329-334
• /
• 2002

The $CaTio_3$powder with perovskite structure was synthesized by mixing anatase $TiO_2$and $Ca(OH)_2$powders as starting materials, and KOH or NaOH as mineralizer, followed by hydrothermal method. The change of crystal structure, particle shape and size of the synthesized $CaTiO_3$powder was investigated with kind and concentration of mineralizer. It was found that the spherical particles of 0.7 $\mu$m were obtained when using 1N KOH and the hexahedrons particles of 3$\mu$m were obtained for the case of using 10 N KOH. With increasing KOH concentration, the particle shape was changed from sphere to hexahedrons and its size also increased. When using 1 N NaOH, the powder was consisted of 0.5~1 $\mu$m particle in size, whereas hexahedrons of 1~4 $\mu$m and whiskers more than 10$\mu$m in size was obtained for the 10 N NaOH solution. With increasing NaOH concentration, the particle shape was varied from hexahedrons to whiskers, showing the similar result with the KOH case. It was confirmed from EDS analysis that Na element, which was detected in hexahedrones was not contained in the whiskers.

• The Korean Journal of Pesticide Science
• /
• v.2 no.1
• /
• pp.24-31
• /
• 1998

Chemical derivative synthesis of ricinine, an active compound of Ricinus communis which showed high mortality against brown planthopper (Nilaparvata lugens), was performed to improve its pesticidal activity and the toxicity of 12 synthetic derivatives against major insect pests and phytopathogenic fungi were examined. Carbamate derivatives of ricinine could be synthesized from the precursor of ricinine, chloronorricinine and norricinine, whereas the derivatives were not synthesized from chlororicinic acid and ricinic acid having ketone group of pyridine ring. In organophosphates, reaction with oxon type of phosphate gave better yield than thiono type. Among the organophosphate derivatives of ricinine, thiono type of derivative structure gave $96.3%{\sim}100%$ mortality of the brown planthopper and the two-spotted spider mite (Tetranychus urticae) at 500 ${\mu}g/ml$ level. On the other hand, carbamate derivatives did not show insecticidal activity. In the fungicidal activity of ricinine derivatives, the derivative having amino radical at the 2 position of ricinine gave 85 to 100% of mycelium growth inhibition effect against ten major plant pathogens at the 200 ${\mu}g/ml$ level. In particular, the control value of the derivative on the rice blast (Pyricularia grisea) and barley powdery mildew (Erysiphe graminis) at the 250 ${\mu}g/ml$ level in vivo under greenhouse conditions was 92% and 96%, respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.2 no.2
• /
• pp.11-19
• /
• 1992

$SrTiO_3$powders were synthesized from the chloride and the nitrate aqueous solution by spray pyrolysis method using ultrasonic vibrator. The concentration of mother solution was prepared 0.05M and O.lM. The carrier gas flow rate was 0.5cm/sec and 1.5cm/sec, respectively. The formation processing was investigated in the 0.05M and 0.05cm/sec. The $SrTiO_3$powders could not be synthesized from chloride aqueous solution. The prepared powders from nitrate aqueous solution was SrTi03 with cubic structure and nearly sphere particle for all samples. Mean particle size was increased from $0.49{\mu}m$ to $0.67{\mu}m$ by changing the carrier gas flow rate from O.5cm/sec to 1.5cm/sec. Also, mean particle size increased from $0.49{\mu}m$to $0.55{\mu}m$by changing the concentration of mother solution from O.05M to O.1M. Atomizing droplet size was $14.3{\mu}m$. The shape of particles was very porous by evaporation of solvent at the initial step. But through the each step upwards, shape of particles was formed themselves into a nearly roundish.

• Journal of the Korea Convergence Society
• /
• v.8 no.5
• /
• pp.1-11
• /
• 2017

With a given spring-mass-damper system, $H_{\infty}$ and ${\mu}$-synthesis control methods are used to build system controllers which minimize vibrations at two major natural frequencies in two cases; without uncertainty; with 20% uncertainty. In order to check the stability and performance of two controllers, those are examined using GM and PM values. The signal strength of output responses is compared using the concept of central numerical differentiation and then results are quantified using the RMS method. Lastly, 40 random samples of $H_{\infty}$ and ${\mu}$-synthesis controllers are obtained for three different $W_{per\;f1}$ weighting functions and drawn in the time domain in order to compare the stability. Overall, ${\mu}$-synthesis controller manages the vibrations much better than $H_{\infty}$ controller according to the robust stability and performance values obtained by simulating random samples of 40 plant models.