• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10b
• /
• pp.145-147
• /
• 2003

시간이 흐름에 따라 위치가 연속적으로 변경되는 객체를 이동 객체(Moving Objects)라고 한다. 이러한 이동 객체의 대용량 궤적 정보를 효율적으로 검색하기 위해서 색인이 필요하며 대표적인 색인으로 TB-tree가 있다. 그러나 전통적인 공간 색인인 R-tree 기반의 TB-tree는 엄격한 궤적 보존 정책에 의해 레코드가 삽입될 때마다 해당 레코드의 선행자(predecessor)를 포함하는 단말 노드를 검색해야 하며, 레코드 삽입으로 인한 단말 노드 MBB의 변경을 해당 단말 노드에서부터 루트 노드까지 반영해야하는 갱신 부하를 가지고 있다. 본 논문에서는 대용량 궤적 정보의 효율적인 색인을 위한 TB-tree 갱신 기법을 제안한다. 본 기법은 앞으로 삽입될 이동 객체의 궤적을 포함하는 예상된 MBB(EMBB: Expected Minimum Bounding Box)를 트리에 먼저 반영한다. 그 후 새로운 레코드가 삽입될 때마다 중간 노드의 MBB를 갱신하지 않고, 삽입되는 레코드의 MBB가 EMBB을 벗어났을 때 EMBB를 재설정하여 실제로 삽입된 레코드의 MBB와 재설정된 EMBB를 포함하도록 중간 노드의 MBB를 조정하므로 TB-tree의 MBB 조정 횟수를 줄인다. 또한 TB-tree에 선행자를 포함하는 단말 노드를 직접적(direct)으로 접근하기 위하여 별도의 선행자 테이블(Predecessor Table) 구조를 두어 레코드 삽입을 위해 선행자를 포함하는 단말 노드의 검색비용을 줄여 전체적인 색인 갱신 비용이 감소된다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.486-489
• /
• 2004

The active magnetic bearing (AMB) systems mounted in moving vehicles are exposed to the disturbances due to the base motion, often leading to malfunction or damage as well as inaccurate positioning of the systems. Thus, in the controller design of such AMB systems, robustness to base disturbances becomes an essential requirement. In this study, effective control schemes are proposed for the homo-polar AMB system, which uses permanent magnets for generation of bias magnetic flux, when it is subject to base motion, and its control performance is experimentally evaluated. The base motion of AMB system is modeled as the dynamic disturbances in the gravity and base excitation forces. To effectively compensate for the disturbances, the angle feed-forward controller based on the inverse dynamic model and the acceleration feed-forward controller based on the normalized filtered-X LMS algorithm are proposed. The performance test of the prototype AMB system is carried out, when the system is mounted on rate table. The experimental results show that the performance of the proposed controllers for the AMB system is satisfactory in compensating for the disturbances due to the base motion.

• Journal of Korea Multimedia Society
• /
• v.10 no.1
• /
• pp.58-65
• /
• 2007

This dissertation proposes digital video protection algorithm lot moving image based on MPEG. Shuffling-based encryption algorithms using a fixed random shuffling table are quite simple and effective but vulnerable to the chosen plaintext attack. To overcome this problem, it is necessary to change the key used for generation of the shuffling table. However, this may pose a significant burden on the security key management system. A better approach is to generate the shuffling table based on the local feature of an image. In order to withstand the chosen plaintext attack, at first, we propose a interleaving algorithm that is adaptive to the local feature of an image. Secondly, using the multiple shuffling method which is combined interleaving with existing random shuffling method, we encrypted the DPCM processed 8*8 blocks. Experimental results showed that the proposed algorithm needs only 10% time of SEED encryption algorithm and moreover there is no overhead bit. In video sequence encryption, multiple random shuffling algorithms are used to encrypt the DC and AC coefficients of intra frame, and motion vector encryption and macroblock shuffling are used to encrypt the intra-coded macroblock in predicted frame.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.19 no.3
• /
• pp.4472-4482
• /
• 1977

In order to estimate furture consumtive use, some statistical characteristics of 22-year pan evaporation data at four selected stations were calculated in this study. Districal distribution, trend analysis and time-series, statistical and periodic analysis for annual, monethly and ten-day values were performed in the statistical analysis. The stations are Seoul, Taeku, Jeonju and Mokpo for monthly data, and Suweon data are compared to the reported Penman values. The results are as followed: 1. Annual evaporation ranged to 990-1,375mm varying with the locations of the stations. The Districal distribution of evaporation in the Republic is shown in Fig. 1. 2. The trend analysis for annual evaporation resulted in detail in Table 2 and Fig. 2, through simple moving average methods. The results show relatively short-period data of about 10 years would be acceptable for field use. 3. The means and dispersions of monthly evaporation at four stations are detailed in Table 3. 4. The monthly evaporation approached to the trend of normal distribution Fig. 3 showed the examples of normal distribution for each typical monthly data. 5. The correlograms detailed in Fig. 4, shows the time-series characteristics of monthly evaporation, whose periodic term should be twelve months. 6. The periodic analysis for monthly evapolation results in Table 4. Fig. 5 shows the comparison of estimated values to actual and the trend approaches Shuster's periodic trend. 7. A periodic description of days after March 1 for irrigation periods was developed to predict ten-day evaporation in Fig. 6. The ten-day etraporation is different in the distribution form and occurence period of maximum values from the reported Penman's man's evapotranspiration.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10B
• /
• pp.1076-1085
• /
• 2009

In this paper, a new method for efficient computation of CGH patterns for 3-D video images is proposed by combined use of temporal redundancy and look-up table techniques. In the conventional N-LT method, fringe patterns for other object points on that image plane can be obtained by simply shifting these pre-calculated PFP (Principle Fringe Patterns). But there have been many practical limitations in real-time generation of 3-D video holograms because the computation time required for the generation of 3-D video holograms must be massively increased compared to that of the static holograms. On the other hand, as ordinary 3-D moving pictures have numerous similarities between video frames, called by temporal redundancy, and this redundancy is used to compress the video image. Therefore, in this paper, we proposed the efficient hologram generation method using the temporal redundancy of 3-D video image and N-LT method. To confirm the feasibility of the proposed method, some experiments with test 3-D videos are carried out, and the results are comparatively discussed with the conventional methods in terms of the number of object points and computation time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4C
• /
• pp.341-350
• /
• 2006

The sand table training is one of the most effective training method in military operations which can accomplish missions such as simulation and rehearsal without limitations related to time, space, money and so on. Previous sand table training has many problems like that the sand table cannot represent real field condition because of its physical properties. So, it is hard to be preserved and impossible to include much of information into them. In this paper, we make an approach based on Augmented Reality(AR) to solve these problems and propose an efficient military training briefing tool with virtual sand table environment described as actual battle field Virtual Tactical Map(VTM) can realize a virtual military training with simple action like moving marker or tangible interface by hand. Real-time state information of VTM gives us more organic intelligence for entire situation. Tangible AR interface provides users with a contents authoring tool that is natural, intuitive and easy to deal with as interaction between user in real world and system that augmented real world with virtual object. VTM is a newly designed military training briefing tools. A military training content can be reproduced and it is possible that user uses this content later. Thus, it shows us potential possibilities of AR applications on military leaning field.

• Journal of KIISE:Software and Applications
• /
• v.30 no.10
• /
• pp.925-937
• /
• 2003

The input of digital TV software is the Transport Stream, which utilizes the moving picture compression technique, MPEC-2 (Moving Picture Experts Groups-2). MPEG-2 TS consists of the complicated table hierarchy and internal relationships, as well as the various restrictions with regards to system standard of digital TV software in determining the field values of transport stream. However, the general MPEG-2 TS generation tool produces transport streams solely based on the MPEG-2 TS specification itself, and does not consider the interaction between modulo features or modules themselves, which construct digital TV software. In this paper, we propose a method to systematically generate MPEG-2 TS test data, namely‘Test Stream’, for digital TV software. We present the experiment result where the test stream derived from our developed tool according to the proposed method was applied to the actual digital TV software settop-box, and then analyze the result. Apart from other existing MPEG-2 TS generation tools, the advantage of our method is that not only is it capable of generating various levels of test streams including digital TV software module, integration, and system testing, but also detecting errors and analyzing their causes.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.4
• /
• pp.495-503
• /
• 2010

The packing and sorting processes of grape are required repetitive movements to need considerable physical load for a long time. And thereby, there is strong possibility to cause musculoskeletal disorders. In this study, ergonomically designed convenience equipments of worktable and handcart are introduced for improvement of the working movements and less physical load to increase the work efficiency. For objective analysis of the movements and the workload between the ones before and after the improvement, we measured heart rate, OWAS, RULA, REBA, LMM, moving Line and work time. Also, we used a checklist of physical fatigue regions to confirm the subjective evaluation of physical load of workers. As the result of study, it showed lower heart rate, value of Working Postures (OWAS, RULA, REBA) and LMM in the work after introduction of those convenient equipments than the work of before the introduction. The work time and moving Line were shortened and the number of grape boxes packed within the same work time was increased, too. Also the overall load as the subjective evaluation was reduced.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.3
• /
• pp.86-91
• /
• 2009

Purpose: The whole body scan in Nuclear Medicine is a widely accepted examination and procedure. Especially, it is mainly used in bone, I-131, MIBI, and HMPAO WBC scans. The diverse uses of the whole body scan range from the HMPAO WBC scan with a speed of 13cm/min, to a whole body bone scan using the Onco. Flash technique with a speed of 30cm/min. The accuracy of table movement has a strong correlation with the image quality, and inaccuracy of speed could negatively affect the image quality. The purpose of this study is to evaluate the accuracy of the table movement while considering the influence of the age of the equipment and the variability in the weight of the patients. Material and Methods: The study was conducted using two of Seoul Asan Medical Center's SIEMENS gamma cameras which are commonly used in our whole body study. The first one is the oldest gamma camera, an ECAM plus (installed in 2000), and the last is brand new one, a SYMBIA T2 (installed in 2008). Three trials were conducted with the tables moving at a different speed each time; 10, 15 and 30 cm/min. The tables' speeds were measured by checking how long it took for the table to move 10cm, and this was repeated every 10cm until the table reached 100 cm. With an average body weight of the patients of about 60~70 kg, the table speed was measured with weights of 0 kg, 66 kg and 110 kg placed on the table, then compared among conditions. Results: The coefficient of variance (CV) of the ECAM plus showed 1.23, 1.42, 2.02 respectively when the table movement speeds were set at 10, 15, and 30 centimeters per minute. Under the same conditions, the SYMBIA T2 showed 1.23, 1.83 and 2.28 respectively. As table movement speed more, the variance of CV as the speed increases. When the patient body weight was set to 0, 66 and 110kg, the CV values of both cameras showed 0.96, 1.45, 2.08 (0 Kg), 1.32, 1.72, 2.27 (66 Kg) and 1.37, 1.73, 2.14 (110 Kg). There was no significant difference (p>0.05) in 95 percent of confidence intervals and measured CV values were acceptable. However, the CV value of the SYMBIA T2 was relatively larger than the ECAM plus. Conclusion: The scan speed of the whole body scan is predetermined based on which examination is being performed. It is possible for the accuracy of the speed to be affected, such as the age of the equipment, the state of the bearings or the weight of a patient. These factors can have a negative impact on the diagnostic consistency and the image quality. Therefore, periodic quality control should be needed on the gamma cameras currently being used, focusing on the table movement speed in order to maintain accuracy and reproducibility.

• Journal of the Korean Vacuum Society
• /
• v.2 no.4
• /
• pp.480-485
• /
• 1993

Factros considered building the magnetron sputtering system for TFT LCD (thin film transistor liquid crystal display0 metallization were thin film thichnes uniformity, temperature uniformity and the pressure gradient of sputtering gas flow in vacuum chamber, base pressure, and the stability fo the carrier moving . The system was consisted of a deposition chamber, a pre-heating chamber, a RF-precleaning chamber and a load/unload lock chamber. The system was designed to handle a substrate with dimension of 400$\times$400mm. The temperautre uniformity of a heater table developed showed $250 ^{\circ}C\pm$5% accuracyon the substrate glass. A base pressure of 1.8 $\times$10-7 torr was obtained after 24 hours pumping with a cryo pump. After an aluminum target was installed in a sputtering source and the film wa sdeposited on the glass, the uniformity, reflectivity and sheet resistance of the deposited film were measured.