• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.302-305
• /
• 2008

For an complete image composition to be stitched on several mosaic images, tracing displacement of direction and distance between successive images are important parameters. The input image is modeled by using a general second order two-dimensional Taylor-series and then converting it to a $3{\times}3$ correlation block and storing the data. A moving factor and coordinate is calculated by comparing the continuous correlation blocks. The experimentation result has a success rate of 85% for moving path tracing as continuous images are moved to 10% of image central position.

• Structural Engineering and Mechanics
• /
• v.38 no.1
• /
• pp.81-97
• /
• 2011

In this research, the wavelet transform is used to analyze time response of a cracked beam carrying moving mass for damage detection. In this respect, a new damage detection method based on the combined use of continuous and discrete wavelet transforms is proposed. It is shown that this method is more capable in making damage signature evident than the traditional two approaches based on direct investigation of the wavelet coefficients of structural response. By the proposed method, it is concluded that strain data outperforms displacement data at the same point in revealing damage signature. In addition, influence of moving mass-induced terms such as gravitational, Coriolis, centrifuge forces, and pure inertia force along the deflection direction to damage detection is investigated on a sample case. From this analysis it is concluded that centrifuge force has the most influence on making both displacement and strain data damage-sensitive. The Coriolis effect is the second to improve the damage-sensitivity of data. However, its impact is considerably less than the former. The rest, on the other hand, are observed to be insufficient alone.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.7
• /
• pp.1508-1512
• /
• 2005

A real time tracking and matching of the screen cursor corresponding to the iris moving by measuring distance between vertical movement and horizontal movement of iris is presented in this paper. The screen cursor is tracked and matched with the distance md direction moving the center-positioned coordinate of iris. The experimental result shows that the moving of iris and screen cursor are accord with distance and size of screen and the optimal tolerance is reduced the tracking error.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.9
• /
• pp.2916-2923
• /
• 1996

A numerical analysis of the moving bed heat exchanger of solid particles inside the vertical pipe was performed using finite difference method. Also, the theoretical solutions were obtained for comparison when the wall heat flux or the wall temperature was assumed constant. The comparison showed that their results agreed well each other. The moving bed heat exchanger was classified as countercurrent-flow, parallel-flow, and cross-flow types according to the gas flow direction. For each type, the thermal efficiency of heat exchanger was calculated as a function of non-dimensional parameters such as the characteristic length of heat exchanger, Biot number and the ratio of thermal capacities of gas and solid particles.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.164-168
• /
• 2004

The vibration analysis of an axially moving membrane are investigated when the membrane has the two sets of in-plane boundary conditions, which are free and fixed constraints in the lateral direction. Since the in-plane stiffness is much higher than the out-of-plane stiffness, it is assumed during deriving the equations of motion that the in-plane motion is in a steady state. Under this assumption. the equation of out-of\ulcornerplane motion is derived, which is a linear partial differential equation influenced by the in-plane stress distributions. After discretizing the equation by using the Galerkin method, the natural frequencies and mode shapes are computed. In particular, we put a focus on analyzing the effects of the in-plane boundary conditions on the natural frequencies and mode shapes of the moving membrane.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.2
• /
• pp.64-70
• /
• 2002

This paper proposes a new construction method of neural networks. The construction method consists of two fundmental ideas, which are a parallel selection-style evaluation and rules evolution. A new collision avoidance algorithm using genetic and neural network is proposed to avoid moving obstacles such as mobile robots. The input parameters of this algorithm is position of moving obstacles and target. Output is a regenerated direction of mobile robot. This algorithm is very simple and so, it is available to application of real time process. The pattern of collision avoidance is learned through test execution.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.9 s.90
• /
• pp.910-918
• /
• 2004

The vibration analysis of an axially moving membrane are investigated when the membrane has the two sets of in-plane boundary conditions, which are free and fixed constraints in the lateral direction. Since the in-plane stiffness is much higher than the out-of-plane stiffness, it is assumed during deriving the equations of motion that the in-plane motion is in a steady state. Under this assumption, the equation of out-of-plane motion is derived, which is a linear partial differential equation influenced by the in-plane stress distributions. After discretizing the equation by using the Galerkin method, the natural frequencies and mode shapes are computed. In particular, we put a focus on analyzing the effects of the in-plane boundary conditions on the natural frequencies and mode shapes of the moving membrane.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.889-893
• /
• 2000

In this paper, a method to detect lanes and obstacles from the images captured by a CCD camera fitted in an automobile is proposed, and a new terminology “Moving Window” is defined. Processing the input dynamic images in real time can cause quite a few constraints in terms of hardware. In order to overcome these problems and detect lanes and obstacles in real time using the images, the optimal size of “Moving Window” is determined, based upon road conditions and automobile states. The real time detection is made possible through the technique. For each image frame, the moving window is moved in a predicted direction, the accuracy of which is improved by the Kalman filter estimation. The feasibility of the proposed algorithm is demonstrated through the simulated experiments of freeway driving.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.1
• /
• pp.81-88
• /
• 2013

This paper describes the fundamentals, design, realization and test results of a BPSK(Bi Phase Shift Keying) transceiver for the direction finding proximity fuze sensor for anti-aircrafts or air missiles. The BPSK transceiver for the direction finding fuze sensor has been designed to detect a moving target by Doppler signal processing with the code correlation method and to distinguish direction by comparing received powers of each Doppler signal from adjacent three receiving antennas. The electrical and ESS(Environmental Stress Screening) tests of the BPSK transceiver showed satisfactory results and target detection and direction finding performances proved to be successful through dynamic operation tests by 155 mm gun firing.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.83-88
• /
• 2010