• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2007.02a
• /
• pp.13-17
• /
• 2007

스케일러블 비디오 코딩(SVC, Scalable Video Coding)은 MPEG(Moving Picture Expert Group)과 VCEG (Video Coding Expert Group)의 JVT(Joint VIdeo Team)에 의해 현재 표준화 되고 있는 새로운 압축 표준 기술이며 시간, 공간 및 화질의 스케일러빌리티를 지원하기 위해 계층 구조를 가지고 있다. 공간적 스케일러빌리티를 위해 기본 계층으로부터 텍스처, 움직임 그리고 잔차신호 정보를 예측하여 사용한다. 그러나 고효율의 압축효과를 얻기 위해 기존의 방식에서는 기본계층에서 얻은 세가지 정보이외에 현재 향상 계층에서 자체적으로 얻은 부호화 정보를 비교하여 최소의 RD(Rate Distortion) 비용을 가지는 정보를 이용하여 부호화 하도록 되어 있다. 하지만 이러한 방식은 향상 계층에서 인터 모드 결정 시 $16\times16,\;16\times8,\;8\times16,\;8\times8,\;4\times4,\;4\times8,\;4\times4$ 블록 모드에 대한 움직임 벡터 예측 및 보상 과정을 거쳐야 하기 때문에 향상 계층에서의 부호화 복잡도는 기본 계층에 비해 상당히 증가하게 된다. 본 논문에서는 기본계층에서 예측한 움직임 벡터 정보를 이용하여 항상 계층에서 모드 결정을 고속화하는 방법에 대해 소개한다. 제안된 방법은 기본 계층에서 예측한 블록모드 중에서 큰 블록인 $16\times16$ 블록에서 움직임 벡터가 (0, 0) 일 경우에 대하여 향상 계층에서는 $16\times16$매크로 블록에 대해서만 움직임 예측 및 보상을 수행함으로써 향상 계층에서 움직임 모드 결정을 조기에 완료하게 된다. 이것은 하위 공간 계층에서 예측한 움직임 벡터 정보가 아주 작을 때는 큰 블록 크기로 모드로 결정되는 일반적인 원리를 이용한 것이고 이 제안 방법을 이용하였을 경우 향상계층에의 모드 결정과정을 고속화함으로써 전체 스케일러빌 비디오 부호하기의 연산량 및 복잡도를 최대 70%까지 감소 시켰다. 그러나 연산량 감소에 따른 비트율의 증가와 화질 열화는 각각 최대 1.32%와 최대 0.11dB로 무시할 수 있을 정도로 작음을 확인 하였다.

• Fire Science and Engineering
• /
• v.32 no.2
• /
• pp.38-47
• /
• 2018

In this study, we compare the engineering seismic design method considering the physical properties of piping materials and the specification-oriented design method according to the seismic design standards of fire fighting equipment. In the case of the seismic design method considering the physical properties of piping materials, the safety of the piping will be analyzed through the combined value of the torsional stress and the bending stress generated in the piping. However, in the case of the design-centered design method, instead of the safety of the piping material, it calculates the moving force of the pipe and interprets whether or not the shaking prevention strut can bear. Fire extinguishing equipment piping is possible through safety analysis of stress and displacement of piping material because piping safety can not be secured via unstable force generated in a certain section with one connected structure is there. Therefore, it is necessary to apply analytical method considering seismic performance of building structure and material properties of piping for seismic design of safe fire extinguishing system piping.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.182-185
• /
• 2005

Satellite cameras are calibrated before launch in detail and in general, but it cannot be guaranteed that the geometry is not changing during launch and caused by thermal influence of the sun in the orbit. Modem satellite imaging systems are based on CCD-line sensors. Because of the required high sampling rate the length of used CCD-lines is limited. For reaching a sufficient swath width, some CCD-lines are combined to a longer virtual CCD-line. The images generated by the individual CCD-lines do overlap slightly and so they can be shifted in x- and y-direction in relation to a chosen reference image just based on tie points. For the alignment and difference in scale, control points are required. The resulting virtual image has only negligible errors in areas with very large difference in height caused by the difference in the location of the projection centers. Color images can be related to the joint panchromatic scenes just based on tie points. Pan-sharpened images may show only small color shifts in very mountainous areas and for moving objects. The direct sensor orientation has to be calibrated based on control points. Discrepancies in horizontal shift can only be separated from attitude discrepancies with a good three-dimensional control point distribution. For such a calibration a program based on geometric reconstruction of the sensor orientation is required. The approximations by 3D-affine transformation or direct linear transformation (DL n cannot be used. These methods do have also disadvantages for standard sensor orientation. The image orientation by geometric reconstruction can be improved by self calibration with additional parameters for the analysis and compensation of remaining systematic effects for example caused by a not linear CCD-line. The determined sensor geometry can be used for the generation? of rational polynomial coefficients, describing the sensor geometry by relations of polynomials of the ground coordinates X, Y and Z.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.6967-6972
• /
• 2014

Assembly using a bolt and nut, and rivet or pin have been used widely for forming mechanical joints. The indent method is an easier process than other manufacturing techniques and the toughness of the material is excellent. On the other hand, there are many cases in which the cracks occur on the manufacturing process as the indent method. Therefore, two kinds of models, in which a pin goes into and out PCB plate in this study were developed using the CATIA program and finite element methods were performed using the ANSYS program. When a pin was passed through a PCB plate in cases 1 and 2, the maximum loads applied to the PCB plate were 79.708N and 90.277N, respectively. When the PCB plate came out of the pin in cases 1 and 2, the maximum loads were 63.783N and 33.75N, respectively. The damage prevention and durability can be improved by applying the study results to the design of real indentation.

• The Journal of Korean Physical Therapy
• /
• v.23 no.5
• /
• pp.49-56
• /
• 2011

Purpose: The purpose of this study was to investigate the kinematic characteristics and muscle activities during the following two conditions: transition from half-kneel to standing on the affected leg and non-affected leg. Methods: Twenty-one hemiplegic patients participated in the study. A motion analysis system was used to record the range of motion and angle velocity of the hip, knee and ankle from the half-kneel to the standing position. Electromyography was used to record the activity of 4 muscles. Results: The statistical analysis showed that the minimum ROM of the hip joint was less on the affected leg during transition from half-kneel to standing. However, the minimum ROM of the knee and ankle joints was less on the non-affected leg during transition from half-kneel to standing. The angle velocity of the knee and ankle joints was less during transition from half kneeling to standing on the non-affected leg. Muscle activity of the rectus femoris and tibialis anterior was less while moving from half-kneel to the standing position on the affected leg. Conclusion: These results show that greater active ROM of the knee and ankle was required on the affected leg for transition from half-kneel to the standing position than for normal gait. Muscle activity of the rectus femoris and tibialis anterior is normally required for movement from the half-kneel to the standing position during normal gait. Further studies are needed to investigate the antigravity movement in healthy subjects and hemiplegic patients in order to completely understand the normal and abnormal movement from the half-kneel to the standing position.

• Journal of Arbitration Studies
• /
• v.16 no.2
• /
• pp.3-49
• /
• 2006

The purpose of this paper is to make research on the settlement mechanism of the commercial disputes between the South and the North of Korea. Also, this paper is to make research on the south-north Korea's cooperative tasks to promote the disputes settlement, including the operation and management of the South-North Arbitration Commission as well as the enactment of the South-North Arbitration Rules. To realize the spirit of the South-North Joint Declaration of June 15, 2000, the Authorities concerned of the South and the North of Korea have reached an agreement titled 'Agreement on Settlement Procedure of Commercial Disputes' on December of the same year. As the follow-up measures of the said Agreement, the South-North Authorities have signed an another agreement called 'Agreement on Organization and Administration of the South-North Arbitration Commission' on October, 2003, which is becoming vital importance for settlement of the commercial disputes between south and north Korea including the Gaeseong Industrial Complex. Gaeseong, a city surrounded by the North Korean military and a symbol of inter-Korean tensions, is now turning into a peace zone where thousands of North and South Koreans are working side by side. The Gaeseong Industrial Complex project, driven by the logic and economic necessity of cooperation, has been steadily moving forward since the North designated it as a special economic zone and has enacted related laws and regulations for its development. Under the situation, the matter of primary concern is how to organize and conduct the Arbitration Commission for the prompt and effective settlement of the south-north commercial disputes. First of all, the South-North Authorities should recognize that the availability of prompt, effective and economical means of dispute resolution such as arbitration and mediation to be made by the Arbitration Commission would promote the orderly growth and encouragement of the south-north trade and investment. In this connection, the Korean Commercial Arbitration Board(KCAB) should be designated as the arbitral institution of the south Korean side under the Agreement on Organization and Administration of the South-North Arbitration Commission. The KCAB is the only authorized arbitral organization in South Korea to settle all kinds of commercial disputes at home and abroad.

• Journal of Broadcast Engineering
• /
• v.25 no.1
• /
• pp.109-112
• /
• 2020

VVC uses 67 modes in intra prediction. Most probable mode (MPM) is used to reduce data for the representation of intra prediction mode. If the mode to send exists in the MPM candidate, the index of the MPM list is transmitted. If it does not exist in the MPM candidate, TBC encoding is applied. When TBC is applied in intra prediction, three are selected in order of low number mode and coded into 5 bits. The remaining modes except the mode encoded by 5 bits are encoded by 6 bits. In this paper, we examine the limitations of the TBC used in VVC intra prediction and propose an adaptive method that can encode more efficiently than conventional methods when using TBC in intra prediction. As a result, the coding efficiency of the overall coding performance is 0.01% and 0.04% in AI and RA, respectively, compared with the conventional coding method.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.02a
• /
• pp.285-291
• /
• 2002

The shearing process for the sheet metal is normally used in the precision elements such as a frame of TFT-LCD or lead frame of If chips. In these precision elements, the burr formation prevents the system assembly and needs the additional burr removing process. In this paper, we developed the small size NC punching system which has an aligning kinematics between the rectangular shaped punch and die. The punch is driven by an ai cylinder and the sheet metal is moving on the X-Y table system which is driven by two stewing motors. The microprocessor control the whole system and communicate with the monitoring PC by RS232C serial communication protocol. The graphic user interface program in PC monitors nil control the punching system. The cross shaped joint hinge supports the punching die and positioned by two differential screws, whose are installed in perpendicular directions. The aligning between the punch and die is performed using the sheets of half thickness(0.1mm Brass) of the real process for the frame of the TFT-LCD. Using half thickness Brass, the burr formation is magnified and we can decide the aligning direction more easily then using the real thickness(0.2mm) Aluminum. In this paper, the aligning results are measured manually using the SEM photographs and we hope to make the automated aligning procedures using some kinds of image processing techniques.

• Journal of Korean Society of Steel Construction
• /
• v.10 no.2 s.35
• /
• pp.263-277
• /
• 1998

Recently, it is frequently reported that fatigue damages of deck slabs and floor systems of highway bridges occur under the conditions of increasing weight and traffic of heavy vehicles. These troubles are affected by dynamic wheel load of heavy vehicles running on roadway surface roughness with bump at expansion joint. It is required that this kind of traffic-induced vibration of highway bridges must be analyzed by using three-dimensional models of bridge and vehicle. In this study, the three-dimensional dynamic analysis is carried out, and dynamic responses of deck slab and wheel loads of moving vehicle are estimated according to different vehicle speeds and bump heights. Analytical responses of bridge deck slab are compared with experimental ones which were measured at Umeda entrance bridge of Hanshin Expressway in Osaka.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2006.11a
• /
• pp.111-115
• /
• 2006

스케일러블 비디오 코딩(SVC, Scalable Video Coding)은 MPEG(Moving Picture Expert Group)과 VCEG (Video Coding Expert Group)의 JVT(Joint VIdeo Team)에 의해 현재 표준화 되고 있는 새로운 압축 표준 기술이며 시간, 공간 및 화질의 스케일러빌리티를 지원하기 위해 계층 구조를 가지고 있다. 특히 시간적 스케일러빌리티를 위해 계층적 B-픽처 구조를 채택하고 있다. 스케일러블 비디오 코딩의 기본 계층은 H.264|AVC와 호환적이므로, 모션 예측과 모드 결정과정에서 $16{\times}16,\;16{\times}8,\;8{\times}16,\;8{\times}8,\;8{\times}4,\;4{\times}8$ 그리고 $4{\times}4$와 같은 7개의 서로 다른 크기를 갖는 블록을 사용한다. 스케일러블 비디오 코딩에서 사용되고있는 계층적 B-픽처 구조는 키 픽처인 I와 P 픽처를 제외하고는 한 GOP (Group of Picture)내에서 모두 B-픽처를 사용하므로 H.264|AVC와 비교했을 때 연산량 증가와 함께 부호화 지연도 급격히 증가한다. B-픽처는 양방향 모션 벡터인 LIST0와 LIST1을 사용하고 양방향 모두에서 다중 참조 픽처를 사용하기 때문이다. 본 논문에서는 통계적 가선 검증을 이용하여 스케일러블 비디오 부호화에 적용 가능한 고속 프레임간 모드 결정 알고리듬 대해 소개한다. 제안된 방법은 $16{\times}16$ 매크로 블록과 $8{\times}8$ 서브 매크로 블록에 통계적 가설 감증 기법을 적용하여 실행되며, 현재 블록과 복원된 참조 블록간의 픽셀 값을 비교하여 RD(Rate Distortion) 최적화 기반 모드 결정을 빨리 완료함으로써 고속 프레임간 모드 결정을 가능하게 한다. 제안된 방법은 프레임 간 모드 결정을 고속화함으로써 스케일러블 비디오 부호화기의 연산량과 복잡도를 최대 57%감소시킨다. 그러나 연산량 감소에 따른 비트율의 증가나 화질의 열화는 최대 1.74% 비트율 증가 및 0.08dB PSNR 감소로 무시할 정도로 작다.