• International Journal of Control, Automation, and Systems
• /
• 제2권1호
• /
• pp.55-67
• /
• 2004

In this paper, an active vibration control of a translating steel strip in a zinc galvanizing line is investigated. The control objectives in the galvanizing line are to improve the uniformity of the zinc deposit on the strip surfaces and to reduce the zinc consumption. The translating steel strip is modeled as a moving belt equation by using Hamilton’s principle for systems with moving mass. The total mechanical energy of the strip is considered to be a Lyapunov function candidate. A nonlinear boundary control law that assures the exponential stability of the closed loop system is derived. The existence of a closed-loop solution is shown by proving that the closed-loop dynamics is dissipative. Simulation results are provided.

• Interaction and multiscale mechanics
• /
• 제6권2호
• /
• pp.257-270
• /
• 2013

The use of lightweight materials has been steadily increasing in the automotive industry, and presents new challenges to material joining. Among many joining processes, self-piercing riveting (SPR) is particularly promising for joining lightweight materials (such as aluminum alloys) and dissimilar materials (such as steel to Al, and metal to polymer). However, to establish a process window for optimal joint performance, it often requires a long trial-and-error testing of the SPR process. This is because current state of the art in numerical analysis still cannot effectively resolve the problems of severe material distortion and separation in the SPR simulation. This paper presents a coupled meshfree/finite element with a moving boundary algorithm to overcome these numerical difficulties. The simulation results are compared with physical measurements to demonstrate the effectiveness of the present method.

• 한국전산구조공학회논문집
• /
• 제20권6호
• /
• pp.779-787
• /
• 2007

본 연구는 계면경계에서 특이성을 갖는 이종재료 열전달문제를 효율적으로 해석할 수 있는 이동최소제곱 유한차분법을 제시한다 이동최소제곱 유한차분법은 격자망(grid)없이 절점만으로 이동최소제곱법을 이용하여 Taylor 다항식을 구성하고 차분식을 만들어 미분방정식을 직접 푼다. 초평면함수 개념에 근거한 쐐기함수를 이동최소제곱 센스(sense)로 근사식에 매입하여 쐐기거동과 미분 점프에 따른 계면경계 특성을 효과적으로 묘사하고 고속으로 미분을 근사하는 이동최소제곱 유한차분법의 강점을 발휘하도록 했다. 서로 다른 열전달계수를 갖는 이종재료 열전도문제 해석을 통해 이동최소제곱 유한차분법이 계면경계문제에서도 뛰어난 계산효율성과 해의 정확성을 확보할 수 있음을 보였다.

• 한국정보통신학회논문지
• /
• 제4권1호
• /
• pp.123-130
• /
• 2000

본 논문은 고정된 카메라에서 얻어진 연속 영상으로부터 능동 윤곽선 모델을 이용하여 이동 물체의 윤곽선을 추출하는 방법을 제안한다. 주위 환경 변화에 강인한 처리를 위해 적응 배경 모델을 사용하였다. 물체 분할 모델은 얻어진 배경 영상과 현재 영상의 차영상으로부터 국부 영상의 임계값 이상의 화소를 찾아 연결한 영역을 분할하며, 형태학적 필터에 의하여 이동 물체의 경계 부분에서 발생하는 잡음을 제거하였다 분할된 이동 물체 윤곽선은 능동 윤곽선 모델을 이용하여 보다 정확한 이동 물체의 경계를 추출한다. 제안한 방법을 사용하여 도로 영상에서 실험한 결과를 보였다.

• Journal of Mechanical Science and Technology
• /
• 제20권6호
• /
• pp.849-863
• /
• 2006

IBM (Immersed Boundary Method) with feedback momentum forcing was applied to stationary and moving bodies. The capability of IBM to treat the obstacle surfaces, especially with moving effect has been tested for two dimensional problems. Stationary and oscillating cylinders were simulated by using IBM based on finite volume method with Cartesian coordinates. For oscillating cylinder, lateral and vertical motions are considered, respectively. Present results such as time histories of drag and lift coefficients for both stationary and oscillating cases are in good agreement with previous numerical and experimental results. Also, the instantaneous wake patterns of oscillating cylinder with different oscillating frequency ratios well represented those of previous researches. More feasibility study for IBM has been carried out to two oscillating cylinders. Drag and lift coefficients are presented for two cylinders oscillating sinusoidally with phase difference of $180^{\circ}$.

• 소음진동
• /
• 제10권1호
• /
• pp.138-143
• /
• 2000

Longitudinal vibration of an axially moving material is investigated by using the assumed modes method. To circumvent a difficulty in choosing the comparison functions which satisfy the boundary conditions, the assumed modes method is adopted by which equations of motion are discretized. Based on the discretized equations, the complex eigenvalue problem is solved and then the effects of the translating velocity on the natural frequencies and modes are analyzed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.305-310
• /
• 2001

This paper presents the computational method for analyzing the compressible flow fields in a high voltage gas circuit breaker. There are many difficult problems in analyzing the gas flow in GCB due to complex geometry, moving boundary, shock wave and so on. In particular, the distortion problem of the grid due to the movement of moving parts can be worked out by the fixed grid technique. Numerical simulations are based on a fully implicit finite volume method of the compressible Reynolds-averaged Navier-Stokes equations to obtain the pressure, density, and velocity through the entire interruption process. The presented method is applied to the real circuit breaker model and the pressure in front of the piston is good agreement with the experimental one.

• 한국전산유체공학회지
• /
• 제10권1호
• /
• pp.16-23
• /
• 2005

The objective of this research is to estimate two dimensional ablating and charring of heat shield materials in severe aero-thermal heat transfer. This estimation requires an accurate and rapid technique for its serious heat transfer with a moving boundary. Aerodynamic heating is obtained by an explicit relation which is a function of Mach number and air condition, while a fully implicit method is used for heat transfer calculations. Moving boundary is captured by FLIAR method which is a subgroup of VOF. Thickness of ablating and charring of heat shield, temperature of the moving surface and rate of radiation heat are calculated and compared with references. The results are in good agreement with other calculations.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권4호
• /
• pp.233-239
• /
• 2000

There are many difficult problems in analyzing the gas flow in puffer type circuit breaker such as complex geometry, moving boundary, shock wave and so on. To predict the interruption performance accurately, these should be considered in the simulation. In this paper, the analysis procedure of the cold gas flow in the circuit breaker is presented. Euler equation is solved by FVFLIC method which is an explicit time difference scheme for an unsteady flow computation. Moving boundaries are treated with a cell elimination-addition technique. The pressure and density in front of piston are calculated from the rate of the cell volume change. The presented method is applied to the real circuit breaker model and the pressure in front of the piston is good agreement with the experimental one.

• 대한기계학회논문집B
• /
• 제31권11호
• /
• pp.895-903
• /
• 2007

CMBT(Curved Moving Boundary Treatment) is a newly developed scheme for the treatment of a no slip condition on the curved solid wall of moving obstacle in a flow field. In our research CMBT was used to perform LBM simulation of a flow over a moving circular cylinder to determine the flow feature and aerodynamics characteristic of the cylinder. To ascertain the applicability of CMBT on the complex shape of the obstacle, it was first simulated for the case of the flow over a fixed circular cylinder in a channel and the results were compared against the solution of Navier-Stokes equation with deforming mesh technique. The simulations were performed in a moderate range of reynolds number at each moving cylinder to identify the flow feature and aerodynamic characteristics of circular cylinder in a channel. The drag coefficients of the cylinder were calculated from the simulation results. We have numerically confirmed that the critical reynolds number for vortex shedding is ar Re=250 and the result is the same as the case of fixed cylinder. As the cylinder approaching to one wall, the 2nd vortex is developed by interacting with the wall boundary-layer vorticity. As the velocity ratio increase the third vortex are generated by interacting with the 2nd vortexes developed on the upper and lower wall boundary layer. The resultant $C_d$ decrease as reynolds number increasing and the Cd approached to a value when Re>1000.