• 한국전산유체공학회지
• /
• 제17권1호
• /
• pp.44-53
• /
• 2012

Immersed boundary method(IBM) is a numerical scheme proposed to simulate flow field around complex objectives using simple Cartesian grid system. In the previous studies, the IBM has mostly been implemented to fractional step method based Navier-Stokes solvers. In this study, we implement the IBM to an incompressible Navier-Stokes solver which uses SIMPLE algorithm. The weight coefficients of the bi-linear and quadratic interpolation equations were formulated by using only geometric information of boundary to reconstruct velocities near IB. Flow around 2D circular cylinder at Re=40 and 100 was solved by using these formulations. It was found that the pressure buildup was not observed even when the bi-linear interpolation was adopted. The use of quadratic interpolation made the predicted aerodynamic forces in good agreement with those of previous studies. For an analysis of moving boundary, we smulated an oscillating circular cylinder with Re=100 and KC(Keulegan-Carpenter) number of 5. The predicted flow fields were compared with experimental data and they also showed good agreements.

• Structural Engineering and Mechanics
• /
• 제54권1호
• /
• pp.55-67
• /
• 2015

Taking the mid-span/center-point of the structure as the reference point of capturing the maximum dynamic response is very customary in the available literature of the moving load problems. In this article, the absolute maximum dynamic response of an Euler-Bernoulli beam subjected to a moving mass is widely investigated for various boundary conditions of the base beam. The response of the beam is obtained by utilizing a robust numerical method so-called OPSEM (Orthonormal Polynomial Series Expansion Method). It is underlined that the absolute maximum dynamic response of the beam does not necessarily take place at the mid-span of the beam and thus the conventional analysis needs modifications. Therefore, a comprehensive parametric survey of the base beam absolute maximum dynamic response is represented in which the contribution of the velocity and weight of the moving inertial objects are scrutinized and compared to the conventional version (maximum at mid-span).

• Structural Engineering and Mechanics
• /
• 제58권5호
• /
• pp.847-868
• /
• 2016

In this study, the free vibration analysis of axially moving beams is investigated according to Reddy-Bickford beam theory (RBT) by using dynamic stiffness method (DSM) and differential transform method (DTM). First of all, the governing differential equations of motion in free vibration are derived by using Hamilton's principle. The nondimensionalised multiplication factors for axial speed and axial tensile force are used to investigate their effects on natural frequencies. The natural frequencies are calculated by solving differential equations using analytical method (ANM). After the ANM solution, the governing equations of motion of axially moving Reddy-Bickford beams are solved by using DTM which is based on Finite Taylor Series. Besides DTM, DSM is used to obtain natural frequencies of moving Reddy-Bickford beams. DSM solution is performed via Wittrick-Williams algorithm. For different boundary conditions, the first three natural frequencies that calculated by using DTM and DSM are tabulated in tables and are compared with the results of ANM where a very good proximity is observed. The first three mode shapes and normalised bending moment diagrams are presented in figures.

• Steel and Composite Structures
• /
• 제44권2호
• /
• pp.255-270
• /
• 2022

This manuscript illustrates the dynamic response of nanoscale carbon nanotubes (CNTs) embedded in an elastic media under moving load using doublet mechanics theory, which not considered before. CNTs are modelled by Timoshenko beam theory (TBT) and a bottom to up modelling nano-mechanics is simulated by doublet mechanics theory to capture the size effect of CNTs. To explore the influence of the CNTs configurations on the dynamic behaviour, both armchair and zigzag configurations are considered. The governing equations of motion and the associated boundary conditions are obtained using the Hamiltonian principle. The Navier solution methodology is applied to obtain the solutions for both orientations. Free vibration and forced response under moving loads are considered. The accuracy of the developed procedure is verified by comparing the obtained results with available previous algorithms and good agreement is observed. Parametric studies are conducted to demonstrate effects of doublet length scale, CNTs configurations, moving load velocities as well as the elastic media parameters on the dynamic behaviours of CNTs. The developed procedure is supportive in the design and manufacturing of MEMS/NEMS made from CNTs.

• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.209-216
• /
• 2000

The lateral behavior of the moving web is critical to the quality of the web products. The alignment of the rollers carrying the web is found to be one of important factors to the lateral behavior of the moving web. But, the study on the effect of the tilting roller in the direction of the normal to the moving web on the lateral behavior has not been reported in the literature yet. For example, the contact roller often contacts the winding roll in a tilted fashion and causes the lateral motion of the winding web, which induces the offset on the wound roll. The lateral dynamics of the moving web induced by a tilted roller in normal direction of a web is investigated in this paper. The two-dimensional dynamic model developed by Shelton is extended to investigate the effect of a titled roller in a normal direction of the moving web on the lateral motion of the moving web. New boundary conditions are developed to solve the extended model. Computer simulation study proved that the model developed can be used to predict the lateral motion of the moving web ？ to a tilted roller in normal direction of the moving web. The lateral deflection is increased exponentially a the tilting angle is increased. As the length of web span is increased, the amount of lateral deflection was increased almost linearly for the same tilting angle. The lateral dynamics turned out to be almost independent to the operating tension. The model developed can be used to solve the offset problem of the staggered winding and also to design a new web guiding mechanism.

• 한국측량학회지
• /
• 제24권2호
• /
• pp.217-226
• /
• 2006

객체의 추출 및 추적은 동영상을 처리하는 영상처리 및 컴퓨터비전 분야에서 매우 기본적이고 중요한 단계로 여러 가지 알고리즘이 제안되었다. 본 논문에서는 두 대의 CCD 카메라를 이용하여 영상을 획득하면서 이동하는 객체를 추적하고 좌표를 계산하기 위한 알고리즘을 제안하였다. 특히 개발한 알고리즘의 적용 및 실용화를 위해 축구장에 대한 1/100크기의 축소모형을 제작하여 실험하였다. CCD 카메라를 통해 얻어지는 영상에서 이동 객체 (축구공)의 RGB값을 이용해 후보를 선정하고 후보 중 객체의 크기값(MBR size)을 이용해 객체를 추출한다. 이렇게 추출된 이동객체의 영상좌표를 획득하고 이동객체의 현재 위치를 중심으로 예상 움직임 범위를 결정하여 그 범위 내에서만 검색을 실시해 이동객체의 실시간 위치를 추적하게 된다. 한편 두 대의 CCD 카메라에 대한 상호표정 및 절대표정을 수행하고, 공간전방교선법을 이용함으로써 이동객체의 3차원 좌표를 획득할 수 있다.

• Structural Engineering and Mechanics
• /
• 제22권3호
• /
• pp.331-349
• /
• 2006

The stresses and deflections in a laminated rectangular plate under thermal vibration are determined by using the moving least squares differential quadrature (MLSDQ) method based on the first order shear deformation theory. The weighting coefficients used in MLSDQ approximation are obtained through a fast computation of the MLS shape functions and their partial derivatives. By using this method, the governing differential equations are transformed into sets of linear homogeneous algebraic equations in terms of the displacement components at each discrete point. Boundary conditions are implemented through discrete grid points by constraining displacements, bending moments and rotations of the plate. Solving this set of algebraic equations yields the displacement components. Then substituting these displacements into the constitutive equation, we obtain the stresses. The approximate solutions for stress and deflection of laminated plate with cross layer under thermal load are obtained. Numerical results show that the MLSDQ method provides rapidly convergent and accurate solutions for calculating the stresses and deflections in a multi-layered plate of cross ply laminate subjected to thermal vibration of sinusoidal temperature including shear deformation with a few grid points.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.619-624
• /
• 2000

Longitudinal vibration of an axially moving material is investigated by using the assumed modes method. to circumvent a difficulty in choosing the comparison functions which satisfy the boundary conditions the assumed modes method is adopted by which equations of motion are discretized. Based on the discretized equations, the complex eigenvalue problem is solved and then the effects of the translating velocity on the natural frequencies and modes are analyzed.

• 한국통신학회논문지
• /
• 제8권1호
• /
• pp.17-22
• /
• 1983

等方性프라즈마円柱가 軸에 수직인 방향으로 일정한 속도로 운동할 때 Lorentz 변환식, 境界條件에 의해 임의의 角度로 入射하는 平面電磁波에 대한 散亂界, 全散亂斷面績, 散亂電力角度分布, 레이다斷面績을 프라즈마円柱의 운동속도, 平面波의 入射角의 關係를 數式으로 유도하고 入射波가 H波인 경우가 E波보다 散亂界에 영향이 많이 있음을 발견하였다.

• Structural Engineering and Mechanics
• /
• 제39권4호
• /
• pp.579-598
• /
• 2011

The present work mainly reports a significant development of a novel efficient meshfree method for vibration and buckling analysis of orthotropic plates. The plate theory with orthotropic materials is followed the Kirchhoff''s assumption in which the only deflection is field variable and approximated by the moving Kriging interpolation approach, a new technique used for constructing the shape functions. The moving Kriging technique holds the Kronecker delta property, thus it makes the method efficiently in imposing the essential boundary conditions and no special techniques are required. Assessment of numerical results is to accurately illustrate the applicability and the effectiveness of the proposed method in the class of eigenvalue problems.