• 전자공학회논문지
• /
• 제53권1호
• /
• pp.129-136
• /
• 2016

초전형 적외선(pyroelectric infrared : PIR) 센서를 이용하여 정지 및 이동인체 감지 시스템을 개발하였다. 감지 시스템은 전원부, 초전형 적외선 센서 인터페이스 회로, 극소형 스템핑 모터, 그리고 디지털 제어부로 구성된다. 정지된 인체를 감지하는 원리는 PIR 센서와 프레넬 렌즈(Fresnel lens)를 부착한 스템핑 모터를 180도로 6초 간격으로 회전하여 인체의 유무를 검출하고 일정기간 동안 인체 감지 신호가 없으면 모터를 정지시키는 것이다. 제안한 감지 시스템에 필요한 제어 알고리즘을 개발하였다. 실험을 통해 감지 시스템은 $37^{\circ}C$의 정지 및 이동하는 인체에 대하여 6m의 감지거리와 30도의 감지 각도를 갖고 있다는 것을 확인하였다.

• 전자공학회논문지
• /
• 제53권2호
• /
• pp.109-116
• /
• 2016

셔터방식의 쵸퍼를 이용한 정지 및 이동인체 감지 모듈을 개발하였다. 감지 모듈은 프레넬 렌즈(Fresnel lens), 초전형적외선(pyroelectric infrared : PIR) 센서, 센서 인터페이스 회로, MCU(micro control unit) 그리고 경보 LED(light emitting diode)로 구성된다. 정지 인체 감지 원리는 PIR 센서에서 나오는 신호를 카메라 셔터를 이용하여 인체의 열을 쵸핑하여 감지하는 방식이다. MCU에서 인터럽트 함수를 제어하는 알고리즘을 통해 정지 및 이동 인체 신호를 감지하게 하였다. 개발한 감지 모듈은 기구부와 PCB(print circuit board)를 일체화함으로써 종래의 상용화되고 있는 이동인체 감지 모듈을 대체 가능하다. 실내 상온에서의 실험 결과, 감지거리는 약 7.0m, 감지각도는 $110^{\circ}$로 측정되었다. 이런 조건에서 감지률은 100%이였고 모듈의 소비 전력는 100mW이였다.

• 대한기계학회논문집
• /
• 제18권7호
• /
• pp.1674-1684
• /
• 1994

An efficient iterative method is presented for the dynamic analysis of bodies moving on flexible structures. In contrast to traditional approaches, the nominal motion of the body is considered here as an unknown. The correct contact forces between the bodies and the flexible structures are computed by an iterative method reducing the specially defined error vectors to zero, and thus satisfying the constraints between the bodies and the structures. Even thought only simple equations of motions and simple time integrators are adopted, the correct solutions are economically obtained and the Timoshenko paradox is completely resolved. Numerical simulations are conducted demonstrate the accuracy and reliability of the solution and to compare the results with the reference.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1891-1895
• /
• 2008

Water covers 70% of the earth's surface and the human body consist of 75% of it. It is clear that water is one of the prime elements responsible for life on earth. Over the last 30 years or so, numerous studies have attempted to find out more about the water microscopically. In this paper, we investigated how the receding and advancing contact angle of the moving water droplet changes on a solid surface having various LJ epsilon parameters. To observe the dynamic contact angle history, a body force applied to all water molecules after obtained the water droplet in equilibrium with the solid surface. We obtained the density profile and receding and advancing contact angle of the moving water droplet

• KSTLE International Journal
• /
• 제5권1호
• /
• pp.7-13
• /
• 2004

The inclined subsurface cracks in a homogeneous body subjected to a moving compressive load is analyzed with the finite element method (FEM) considering friction on the crack surface. The stress intensity factors for the inclined subsurface cracks are evaluated numerically for various cases such as different inclined angles and changes in the coefficient of friction. The effects of the inclined angle and the coefficient of friction on the stress intensity factor are discussed. The difference between the behaviors of the parallel subsurface crack and those of the inclined subsurface crack is also examined.

• 자원환경지질
• /
• 제16권4호
• /
• pp.269-276
• /
• 1983

단순한 사각주형(四角柱型) 물체(物體)에 대한 3차원 표준곡선을 해석하였다. 이들 표준곡선은 쌍극자배치(雙極子配置)에 대하여 적분방정식을(積分方程式) 이용한 수치계산기술(數値計算技術)로 구하였다. 전도성(電導性) 물체에 대한 IP응답(應答)은 물체의 폭과 두께의 비율에 따라서 그 패턴이 달라진다. 주향(走向)길이가 쌍극자간격(雙極子間隔)의 6배 이상이 되면 2차원의 결과와 유사하다. 또한 주향(走向)길이가 길고, 폭이 쌍극자 간격의 4배이상이 되면 층구조(層構造)(1차원) 해석도 가능하게 된다. 한편, 측선(測線)이 주향방향(走向方向)을 따라서 물체의 중심으로부터 멀어지는 효과는 물체의 깊이가 지표로부터 깊어질 때와 비슷하게 나타난다. 물체가 측선하(測線下)에서 측선과 평행(平行)한 방향으로 이동하더라도 IP패턴에는 거의 영향을 미치지 않는다.

• 대한조선학회논문집
• /
• 제46권6호
• /
• pp.688-698
• /
• 2009

In this paper, the steady lift force acting on a slender body moving beneath regular wave systems of arbitrary wavelengths and directions of propagation is considered. The momentum conservation theorem and the strip method are used to obtain the hydrodynamic forces acting on the body and affecting its motions on the assumption that the body is slender. In order to obtain the vertical steady force acting on it, or the free surface suction force, the second-order hydrodynamic forces caused by mutual interactions between the components of the first-order hydrodynamic forces are averaged over time. The validity of the method is tested by comparison of the calculated results with experimental data and found to be satisfactory. Through some parametric calculations performed for a typical model, some useful results are obtained as to the depth of submergence of the body, wavelengths, directions, etc.

• 대한조선학회논문집
• /
• 제56권1호
• /
• pp.47-57
• /
• 2019

Recent CFD solvers in engineering have to treat geometrically complex domains and moving body problems. In ship hydrodynamics, flow around the stern and ship motions in waves are examples of such cases mentioned before. The unstructured grid scheme is successfully applied for these problems, but it has weakness of inefficient memory usage and intensive computational time as compared to the structured grid method. Overset grid scheme is one of the alternatives for structured grid system taking advantage of fast and memory efficiency. Overset grid scheme is especially useful for moving body problem because there is no need to re-mesh around the body. In this paper, we adopted the Suggar++, the grid connectivity and interpolation utility for the overlapping grid, to WAVIS which is the in-house flow solver of KRISO. Then we introduced some applications using the overset grid method for flow analysis around the ships. The computed results show that WAVIS with Suggar++ is practically feasible and has an advantages for moving geometry cases.

• 대한치과보철학회지
• /
• 제28권1호
• /
• pp.123-135
• /
• 1990

It would be of importance to determine the neutral Tone by a resultant axis of relation on relation to the mandible in understanding the biomechanics of the mandibular movement. In this study, the neutral zone at the habitual opening and closing mandibular movements is the shape of the paths described by a minimum moving point occured as an average center of the determined instantaneous centers of rotation. Twenty, aged $23{\sim}25$, male dental students without Temporomandibular disorders and with normal occlusion clinically were selected for the study. The habitual opening and closing mandibular movements were recorded by the Gnathorecouder and analyzed by the computer program of a planer rigid body model and the determined method of a minimum moving point. The results obtained from this study were as follows. 1. The minimum moving points were placed in the body of the mandible except two subjects. 2. The mean of maximum displacements of a minimum moving point was $0.62{\pm}0.08cm$ on X-axis and $0.73{\pm}0.16cm$ on y-axis. 3. The mean of maximum displacements of a minimum moving point was $3.39{\pm}0.62cm$ 4. The position and shape of the neutral zone were determined by the position, displacements, and moving distances of a minimum moving point.

• 한국전산유체공학회지
• /
• 제5권2호
• /
• pp.9-19
• /
• 2000

Transient aerodynamic response of an airfoil to a moving plane-flap is numerically investigated using the two-dimensional Euler equations with conservative Chimera grid method. A body moving relative to a stationary grid is treated by an overset grid bounded by a 'Dynamic Domain Dividing Line' which has an advantage for constructing a well-defined hole-cutting boundary. A conservative Chimera grid method with the dynamic domain-dividing line technique is applied and validated by solving the flowfield around a circular cylinder moving supersonic speed. The unsteady and transient characteristics of the flow solver are also examined by computations of an oscillating airfoil and a ramp pitching airfoil respectively. The transient aerodynamic behavior of an airfoil with a moving plane-flap is analyzed for various flow conditions such as deflecting rate of flap and free stream Mach number.