• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 춘계학술발표회논문집
• /
• pp.107-112
• /
• 2004

Corresponding to the importance of real-time position tracing in the customs free zone, the logistics monitoring system utilizing GPS and PDA correctly confirms the position of the logistics at real time. Information obtained through the use of bluetooth is transmitted into the control station that controls the flow of the logistics. This logistics monitoring system can efficiently identify the movement of the logistics all the time.

• 전기학회논문지
• /
• 제61권11호
• /
• pp.1732-1736
• /
• 2012

To increase speed up of train, in the field of catenary system, it is necessary to develop of new monitoring methods for dynamic interaction between pantograph and contact wire. Also, there is a need to develop technologies that constantly measure are from various railway structure such as uplift of contact wire, vibration of catenary, dynamic strain of contact line in tunnel. In this paper condition monitoring systems for dynamic performance of catenary systems in tunnel were proposed. An advanced method and results of field tests using high speed camera for monitoring of vertical upward movement of the grooved contact wire due to the force produced from the pantograph were presented. The proposed uplift measurement system of contact wire is expected to enhance precision of current collection quality performance assessment methods at high-speed lines.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 사면안정 학술발표회
• /
• pp.60-76
• /
• 2000

Early detection in real-time response of slope movements ensures tremendous saving of lives and repair costs from catastrophic disaster Therefore, it is essential to constantly monitor the performance and integrity of slope-stabilizing structures such as Rock bolt, Nail and Pile during or after installation. We developed a novel monitoring system using Fiber Bragg Grating (FBG)sensor. It's advantages are highly sensitivity, small dimension and electro-magnetic immunity. capability of multiplexing, system integrity, remote sensing - these serve real-time health monitoring of the structures. Real-time strain measurement by the signal processing program is shown graphically and it gives a warning sound when the monitored strain state exceeds a given threshold level so that any sign of abnormal disturbance on the spot can be easily perceived.

• 한국정보통신학회논문지
• /
• 제3권1호
• /
• pp.75-82
• /
• 1999

무선 실시간 모니터링 시스템은 무선 모뎀, 중앙 모니터, 이동단말기, 데이터베이스 서버로 구성되며 환자의 이동성, 설치시간의 감소, 장기간으로 본 비용절감 등의 잇점을 제공한다. 또한 이 시스템은 환자 위치추적 서비스를 제공한다. 환자 위치 추적 서비스는 무선 모니터링 시스템의 경우 환자 이동중 위급 상황 발생시 응급 처치를 위해 반드시 제공되어야 한다. 본 논문에서는 개선된 CSMA/CA프로토콜과 환자 위치 추적 알고리즘을 제안하고 이를 이용하여 무선 실시간 모니터링 시스템을 구현하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.920-923
• /
• 2003

An wearable electrocardiogram (ECG) monitoring system is a widely used non-invasive diagnostic tool for ambulatory patient who may be at risk from latent life-threatening cardiac abnormalities. In this paper, we have a portable ECG monitoring system with conductive fiber which was characterized by the small-size and the low power consumption. The system consists of conductive fibers, one-chip microcontroller, ECG preprocessing circuit, and monitoring software to be able to record and analyze in PC. ECG preprocessing circuit is made of pre-amplifier with gain of 10, band-pass filter with bandwidth of 0.5-120Hz and 2.5V offset circuit for A/D conversion. ECG signals obtained by sensor are included with corrupted noises such as a baseline wandering, 60 Hz power noise and interference noise by body movement. For cancellation corrupted noises in signals obtained by conductive fiber, we used the wavelet decomposition of wavelet transforms in MATLAB toolbox.

• 드라이브 ㆍ 컨트롤
• /
• 제17권4호
• /
• pp.15-22
• /
• 2020

With the need for efficient maintenance technology to reduce maintenance costs for steel bridges, repainting robots are being developed to automate the work in narrow and poor bridge spaces. The repainting robot is equipped with a blasting module to remove paint layers and contaminants. This study developed a prototype monitoring module to be mounted on the repainting robot. The monitoring module analyzes the condition of the painting surface through a camera installed in the front, guides the direction of movement of the robot, and provides the operator with a video to check the working status after blasting through a camera installed in the back. Various image visibility enhancement technologies were applied to the monitoring module to overcome worksite challenges where incomplete lighting and dust occurs.

• 한국지반공학회논문집
• /
• 제24권11호
• /
• pp.5-16
• /
• 2008

국내현장에서 수집된 9개소 안벽구조물의 측방이동 실측자료에 대한 분석을 통해 연약지반상 안벽의 측방이동을 평가할 수 있는 방안을 제안한다. 잔교식 안벽 등과 같이 말뚝이 시공되어 있는 호안 안벽구조물의 측방이동 가능성을 효과적으로 판정하기 위해서는 말뚝의 사면안정 기여효과를 반영한 사면안정해석을 수행해야 하며, 측방이동을 방지하기 위해서는 말뚝의 사면안정효과 고려시 최소 1.6 이상의 사면안전율을 확보하여야 한다. 한편, 케이슨식 안벽과 같이 말뚝이 시공되지 않은 연약지반상 호안구조물의 안정을 위한 소요 사면안전율은 1.3 이상으로 규정하는 것이 바람직하다.

• 한국측량학회지
• /
• 제31권6_2호
• /
• pp.529-538
• /
• 2013

Coastline is the most dynamic part of seascape since its shape is affected by various factors. Coastal zone is an area with immense geological, geomorphological and ecological interest. Monitoring coastal change is very important for safe navigation, coastal resource management. This paper shows a result of monitoring coastal morphological changes using Remote Sensing and GIS. Study was carried out to obtain intensity of erosion, deposition and sand bar movement in the Red River Delta. Satellite images of ALOS/AVNIR-2 and Landsat were used for the monitoring of coastal morphological changes over the period of 1975 to 2009. Band rationing and threshold technique was used for the coastline extraction. Tidal levels at the time of image acquisition varied from -0.89m to 2.87m. Therefore, coastline from another image at a different tidal level in the same year was considered to get the corrected coastline by interpolation technique. A series of points were generated along the coastal line from 1975 image and were established as reference points to see the change in later periods. The changes were measured in Euclidean distances from these reference points. Positive values represented deposition to the sea and negative values are erosion. The result showed that the Red river delta area expanded to the sea 3500m in Red river mouth, and 2873m in Thai Binh river mouth from 1975 to 2009. The erosion process occurred continuously from 1975 up to now with the average magnitude 23.77m/year from 1975 to 1989 and 7.85m/year from 2001 to 2009 in Giao Thuy area. From 1975 to 2009, total 1095.2ha of settlement area was eroded by sea. On the other hand, land expanded to the sea in 4786.24ha of mangrove and 1673.98ha of aquaculture.

• 대한기계학회논문집A
• /
• 제22권3호
• /
• pp.644-653
• /
• 1998

In resistance spot weld, the assurance of weld quality has been a long-standing problem. Since the weld nuggets if resustance spot welding form between the workpieces, visual detection of defects in usually impossible. Welding quality of resistance spot welding can be verified by non destructive and destructive inspections such as X-Ray inspection and testing of weld strength. But these tests, in addition to being time-consuming and costly, can entail risks due to sampling basis. The purpose of this study is the development of the monitoring system based on fuzzy inference, aimed at diagonosis of quality in resistance spot welding. The fuzzy inference system consists of fuzzy input variables, fuzzy membership functions and fuzzy rules. For inferring the welding quality(strength), the experimental data of the spot welding were acquired in various welding conditions with the monitoring system designed. Some fuzzy input variables-maximum, slop and difference values of electrode movement signals-were extracted from the experimental data. It was confirmed that the fuzzy inference values of strength have a .${\pm}$5% error in comparison with actual values for the selected welding conditions(9-10.5KA, 10-14 cycle, 250-300 $kg_f$). This monitoring system can be useful in improving the quality assurance and reliability of the resistance spot welding process.

• 한국산학기술학회논문지
• /
• 제12권1호
• /
• pp.351-356
• /
• 2011

본 논문에서는 애완동물의 생활 패턴과 습성을 연구하기 위해, 초음파, 온도, 습도와 조도 센서를 이용한 애완동물 위치추적 및 원격모니터링 시스템을 설계하였다. 애완동물의 위치를 파악하기 위해 초음파를 사용하여 거리 계산을 하였고, WSN(Wireless Sensor Network)을 이용하여 애완동물이 위치하는 장소의 온도, 습도와 조도 같은 센싱데이터들은 싱크모트로 전송하였다. 애완동물 모니터링 시스템에서는 수신된 센싱데이터들을 실시간으로 데이터베이스에 저장하고, 실제 공간에서 애완동물의 위치를 파악하였다. 송신모트들 사이의 간섭(interference) 문제는, 싱크모트의 비콘을 기준으로 송신모트들 간에 순차적으로 전송함으로써 해결하였다. 탐색된 위치를 시간별로 분석하여 애완동물의 이동패턴과 이동영역, 온도, 습도와 조도 등을 GUI(Graphical User Interface) 형태로 나타내는 애완동물 모니터링 시스템을 실험실 모델로 구현 및 실험하였다.