• Science of Emotion and Sensibility
• /
• v.21 no.2
• /
• pp.137-144
• /
• 2018

The study figured out the operational conditions of a two-way movement actuator made of one-way shape memory alloy (OWSMA) for versatile ventilation intelligent garments. To develop a low-power actuator that consumes energy only when a garment changes its form such as opening and closing, multiple channels of OWSMA were used, and optimum diameter of the wires was examined. For the switch device, optimum voltage application unit time was determined. Optimum diameter of OWSMA wire was determined by applying 3.7V to the pre-determined candidate diameters, which demonstrated two-way operation in previous studies. In order to evaluate the optimum voltage application time, the internal diameter of the actuator was measured while increasing and decreasing by 50 ms from the unit time of voltage application. Delay time under two-way operation of the actuator was measured to minimize interference caused by heat between channels. Power of 3.7V was applied to OWSMA for assessment of optimal time, and the whole process from heating to cooling was video-recorded with a thermal image camera to determine the point of time at which the temperature of OWSMA wire dropped below the phase transformation temperature. The results showed that $0.4{\Phi}$ was the most suitable diameter, and the optimum unit time of voltage applied to open and close the actuator was 4100ms. It was also shown that the delay time should be more than 1.8 seconds between two-way operations of the actuator.

• Herbal Formula Science
• /
• v.25 no.2
• /
• pp.223-251
• /
• 2017

Objectives : A lot of experiment results of Yugmijihwangtang(YM) are reported in various kinds of journals. Many of them report on the new effects that are not recorded in the traditional medical texts. So it is necessary to take it into consideration that newly reported effects could be of help to clinical practice, because this process of comparison of Donguibogam and scientific experiment results will have basis to lead into the evidence based medicine. Methods : We compared the effects of in Donguibogam and the experiment results of YM. Results : The effects of YM in Donguibogam are to replenish essence and marrow, and to treat red wen, fatigue, treat hypouresis, urinary sediment, urinary urgency, hematuria, hydrocephalus, speech and movement retardation, yin-deficiency, diabetes mellitus, nonalcoholic fatty liver, melanoma, disability to see near and far sight, tinnitus, hearing loss, alopecia, angiogenesis, cough, cough at night, trachyphonia, and, infantile convulsion. The experiment results of YM since 2000 in both Korea and China are to inhibit atopic dermatitis, renal interstitial fibrosis, anti-oxidant, emphysema, stress, glomerulosclerosis, diabetic nephropathy, chronic glomerulonephritis, hemorrhage, plantar sweating, dermal aging, kidney aging, bone loss, breast cancer, pathological myocardial cell, primary liver cancer, thrombosis, osteoporosis, intrauterine growth retardation, chronic renal failure, IgA nepropathy, slow cerebral development, and hippocampal tissue lesions on the one hand, and to help bone formation, renin-angiotensin- aldosterone system, cerebral recovery, cognitive function and expression, osteoblast proliferation and differentiation, learning and memory, cold-tolerance and oxygen deficit-tolerance and anti-fatigue, endometrial formation, humoral and cell-mediated immunity, immune regulation effect, Hypothalamus-Pituitary-Ovary Axis, and spermatogenesis, on the other hand. Conclusion : When we compared the effects of YM with the experiment results of YM, there existed a considerable gap between them. So, from now on, it is expected that a great effort and consideration are needed to solve these gaps from an academic and clinical point of view.

• Journal of Biomedical Engineering Research
• /
• v.34 no.3
• /
• pp.148-155
• /
• 2013

This study is about the development of the wrist rehabilitation system for the patient who has limited capability of movement after stroke. Electromyography triggered training system (ETTS) can play the role between complete passive training and patient activating training system. Surface EMG was measured on pronator teres muscle and biceps brachii muscle for wrist pronation and supination. Our system detects whether the subject makes muscular effort for pronation or supination or nothing in every 50 ms. When the effort level exceeds the preset percentage of maximal voluntary contraction, the motor rotates according to the direction of the intention of the subject. EMG triggers the motor rotation for the wrist rehabilitation training until the preset angle. To evaluate its performance, the maximum voluntary contraction level was measured for 4 subjects at first. With the audio-visual instruction to rotate the wrist (pronation or supination) the subjects made effort to follow the instruction. After calculating root mean square (RMS) for 50 ms, the controller determines whether there was muscular effort to rotate while holding the motor. When there was an effort to rotate, the controller rotates the motor 0.8 degree. By comparing the RMS values from two channels of EMG, the controller determines the rotational direction. The onset delay is $0.76{\pm}0.24$ s and offset delay is $0.65{\pm}0.22$ s for pronation. For supination the onset delay is $1.24{\pm}0.41$ s and offset delay is $0.77{\pm}0.22$ s. The system responded fast enough to be used for rehabilitation training. The controller perceived the direction of rotation 100% correctly for the pronation and 97.5% correctly for supination. ETTS was developed and the fundamental functions were validated for normal subjects. The clinical validation should be done with patients for real world application. With ETTS, the subjects can train voluntarily over the limitation of the range of motion which increases the effectiveness of the rehabilitation training.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.2
• /
• pp.161-170
• /
• 2006

PFC(Perfluorocarbon) decontamination process is one of best methods to remove hot particulate adhered on the inner surface of hot cell and surface of equipment in hot cell. It was necessary to develop a filtration equipment to reuse the PFC waste solution generated on PFC decontamination due to the high cost of PFC solution and for minimization of the volume of second waste solution. The filtration equipment was developed to remove hot particulate in PFC waste solution. It was made suitable size and weight in consideration of hot cell gate and crane. And it has wheels for easy movement. Flux of the filtration equipment decreased with particulate concentration increase. It consists of pre-filter($1.4{\mu}m$) and final-filter($0.2{\mu}m$) for protection of the flux decrease along filtration time. It treatment capacity of waste solution is 0.2 L/min.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.4
• /
• pp.293-301
• /
• 2010

Optical fiber cable, as a sensor, was installed on the wall of KAERI(Korea Atomic Energy Research Institute) Underground Research Tunnel(KURT) in order to monitor the physical stability of the tunnel, which was constructed for technical development and demonstration of radioactive waste disposal. This monitoring system has two simultaneous measurements of temperature and strain over time using Brillouin backscatter. According to the results of the monitoring from Jan. 2008 to Nov. 2009, there is no significant displacement or movement at the tunnel wall However, the cumulative volume of total strain increased slightly as time passes with the comparison of the reference observation, which was measured in Jan. 2008. The change in cumulative volume of total strain indicates that the strain level had been affected by saturation and de-saturation phenomena due to groundwater fluctuation at several points at KURT. This system is based on the distributed sensing technique concept, not point sensing. By using this system, a displacement can be detected with the range from $20{\mu}{\varepsilon}$ to $28,000{\mu}{\varepsilon}$ every 1m interval in minimum. A temperature variation can be monitored at every 0.5m interval with the resolution of 0.01 in minimum. Based on the study, this monitoring system is potentially applicable to long term monitoring systems for radioactive waste disposal project as well as other structures and underground openings.

• The Journal of the Korea Contents Association
• /
• v.14 no.6
• /
• pp.499-512
• /
• 2014

Architecture is usually seen as a product of art and technology. However, most historical buildings also exemplify various sophisticated principles of mathematics. Outstanding examples of architecture around the world such as Seokguram, Daewoongjun of Bulguksa, Muryangsujeon of Buseoksa, and the Parthenon provide students with a great opportunity to study their underlying mathematical properties and principles. The activity of identifying and investigating such mathematical principles in historical buildings enables students to realize that mathematics is a practical subject, and thus provides justification for the study and importance of mathematics. For the purpose of this study historical architecture was reviewed with this in mind in order to develop STEAM education materials focused on elementary school mathematics. The result of this study is as follows: first of all, appropriate examples of historical architecture were selected on the basis of the 2009 revised curriculum's content and teaching goals. These involved chapters on 'proportion', 'symmetry', 'movement of figures', 'building blocks', and 'triangles'. Secondly, a meta-analysis was performed on the historical buildings that clearly illustrate mathematical principles. Thirdly, STEAM education materials focused on elementary mathematics using architectural examples were developed which made actual application in classrooms possible. And lastly, surveys of professional groups were conducted to verify whether the produced materials were suitable teaching resources.

• Cartoon and Animation Studies
• /
• s.42
• /
• pp.315-335
• /
• 2016

Culture is being created and consumed as several form by human development. Populace is forming through movement of mass of people to specific place which influenced by urbanization and industrialization. Since cultural products are created on base of economic principles cultural content makers are make culture products after lot of study and analyze. In early days popular culture was accepted only by the meaning of the text which has settled already via country or company which was holding the capital. But today we can apply culture products freely by the power of public opinion and media art's growth. Especially fandom is giving the opportunity to consume the image of cultural products actively and offering the good influence to make it by several ways of activities to the culture producers. In this study, consumption as a cultural group formed by the fandom in public will be transformed into participatory groups by the influence of cultural activities with fan art reproduction. These changes in the consumption of culture products will make it in positive way. Thereby culture creator who thinks fandom as a group of culture capital maker only use it now for the indicator for predicting success of culture products. Will find out in this study how culture consumption is accomplishing by fan fiction and fan illustration in the fandom culture and how reproduced fan art is affects to culture creators.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.1141-1149
• /
• 2009

In Bone Mineral Density(BMD) measurements, accuracy and precision must be superior in order to know the small changes in bone mineral density and actual biological changes. Therefore the purpose of this study is to increase the reliability of bone mineral density inspection through appropriate management of image quality from machines and inspectors. For the machine management method, the recommended phantom from each bone mineral density machine manufacturer was used to take 10~25 measurements to determine the standard amount and permitted limit. On each inspection day, measurements were taken everyday or at least three times per week to verify the whether or not change existed in the amount of actual bone mineral density. Also evaluations following Shewhart control chart and CUSUM control chart rules were made for the bone mineral density figures from the phantoms used for measurements. Various forms of management became necessary for machine installation and movement. For the management methods of inspectors, evaluation of the measurement precision was conducted by testing the reproducibility of the exact same figures without any real biological changes occurring during reinspection. There were two measurement methods followed: patients were either measured twice with 30 measurements or three times with 15 measurements. An important point to make regarding measurements is that after the first inspection and any other inspection following, the patient was required to come off the inspection table completely and then get back on for any further measurements. With a 95% confidence level, the precision error produced from the measurement bone mineral figures produced a precision error of 2.77 times the minimum of the biological bone mineral density change (Least significant change: LSC). In order to assure reliability in inspection, there needs to be good oversight of machine management and measurer for machine operation and inspection error. Accuracy error in machines needs to be reduced to under 1% for scientific development in bone mineral density machines.

• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.2
• /
• pp.95-103
• /
• 2005

Purpose : In the radiosurgery, to obtain CT image to find more accurate tumor position during respiration, and using them, to increase the accuracy of radiation treatment by applying image guided. Materials and Methods : Using the self-made vacuum cushion for the body SRS, CT images were obtained three for each patient during respiration (shallow, inhalation, exhalation). They were transformed to the RTP computer and then were fused. Global GTVs were delineated on the fused images and more appropriated treatment planning was established. Results : We can find the tumor position is moving toward cranio-caudal with max 10 mm margin and volume is transformed. As a result from the comparision of DVH (pre & post radio surgery), we observed about 100% dose to tumor. Conclusion : BSRS was skeptical due to the tumor movement during respiration. More accurate by the combination of the development of immobilization devices and BSRS based on Image Guide, it will be applied to more cases for BSRS.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.6
• /
• pp.1292-1305
• /
• 2013

Along with the strengthening vehicle environmental regulations and the growing needs for the energy consumption reduction technology, the researches on the engine idle stop system, have been briskly carried out around the automobile manufacturers before the development of alternative energy. Furthermore, there is a movement to disseminate the environment friendly idle stop system by combining the system to the generalized smart key system to not only increase purchasing but also provide the convenience and save the energy as well. In this paper, we designed and implemented the idle stop system algorithm for the aftermarket smart key system with the OBD-II interface. The implemented start stop system is capable of controlling two independent systems, the smart key system and intelligent idle stop system, on a single ECU. In addition, the implemented start stop system standardizes the communication interface with the vehicles to reduce the time required for installing the start stop system to the various vehicles, and satisfies every standard response time limit for the vehicle status request signals.