• 전기학회논문지
• /
• 제67권2호
• /
• pp.186-193
• /
• 2018

Generally, it is difficult to operate moveable-weir due to the expensive cost of the facility management and manpower consumption. Also, when it is installed in a remote area, there is a problem that the cost of connection for power system increases as well as the operating cost. Therefore, this paper proposes an optimal design algorithm to replace an existing power system with an Eco-friendly power supply system for movable-weir using PCS, PV module and lithium-ion battery. Also, this paper proposes a modeling method of environment-friendly power supply system for a movable-weir based on the PSCAD/EMTDC S/W and implements 5[kW] prototype environment-friendly power supply system. As a result of the performance test using the S/W modeling and the prototype system, it is confirmed that the proposed system has stable characteristics in the independent operation mode and the interconnection mode.

• 한국농공학회논문집
• /
• 제59권5호
• /
• pp.73-81
• /
• 2017

The improved movable weir supplements the advantages and disadvantages of the rubber weir and the conduction gate. It consists of a stainless steel gate, air bags, and a steel clamping plate. The stainless steel gate is the main body of the weir, and the inflatable rubber sheet serves to support the steel gate. The steel clamping plate is typically in direct continuous contact with water, but this leads to corrosion issues that can reduce the life of the entire movable weir. In this study, a panel-type glass-fiber-reinforced polymer (GFRP) clamping plate was designed and fabricated. The test results showed that the flexural load of the panel-type GFRP composite clamping plate was over twice that of the wings type GFRP clamping plate. The lowest moisture absorption value was obtained upon exposure to tap water, and exposure to other solutions showed similar values. Additionally, flexural load testing after exposure to an accelerated environment found the lowest residual loads of 80.51 % and 78.50 % at 50 and 100 days, respectively, for exposure to a $CaCl_2$ solution, while exposure to other environments showed residual failure loads of over 80 % at both 50 and 100 days.

• 한국산학기술학회논문지
• /
• 제21권2호
• /
• pp.601-610
• /
• 2020

최근, 세계적인 기후변화로 인하여 여름철마다 가뭄으로 인한 피해는 점점 심각해지는 상태이다. 이러한 문제를 해결하기 위하여, 산간오지에는 고정(콘크리트)보가 아닌 수위조절이 가능한 가동보가 설치되고 있다. 기존의 가동보 구동방식은 시설관리 및 인력소모로 인해 고가의 운용비용이 발생하여 운용상 어려움을 겪고 있다. 또한, 가동보는 대부분 전력계통과 연계하여 사용하고 있으므로 오지에 설치되는 경우, 전력계통 연계비용에 대한 부담이 증가하고 운용비용도 상승하는 문제점이 발생되고 있다. 따라서, 본 논문에서는 상기의 문제점들을 해결하기 위하여, 가동보(공압식)에 공급되는 기존의 전원을 태양광모듈과 리튬이온전지를 이용한 자연에너지 전원공급시스템으로 대체하는 최적 운용알고리즘과 리튬이온전지의 SOC(state of charge) 평가 알고리즘을 제시한다. 또한, 전력계통의 상용해석 프로그램인 PSCAD/EMTDC를 이용하여 50kW 전원공급시스템의 모델링을 수행하여, 독립운전모드와 계통연계운전모드에서 안정적으로 운용되고 있음을 확인하고, 투자비용에 대한 편익을 분석하여 상용화 가능성을 제시한다.