• 한국정밀공학회지
• /
• 제10권1호
• /
• pp.114-125
• /
• 1993

Thermoelastoplastic analysis of a typical device consisting of fixed tube and movable case having an inital clearance in between, which is subjected to pressure and thermal load, has been carried out to examine the cause of malfunction mainly at high temperature condition, and to improve the design. Stresses, deformed shape, interface state and their effects on normal function of case are discussed by using finite element method. The extraction energy can be remarkably reduced by changing the configuration of tube from the present design (Parallel type) to the improved design (Tapered type). This effect has been proved by sustained cyclic function test.

• 한국기계가공학회지
• /
• 제21권9호
• /
• pp.78-84
• /
• 2022

An air circuit breaker (ACB) is an electrical protection device that interrupts abnormal fault currents that result from overloads or short circuits in a low-voltage power distribution line. The ACB consists of a main circuit part for current flow, mechanism part for the opening and closing operation of movable conductors, and arc-extinguishing part for arc extinction during the breaking operation. The driving mechanism of the ACB is a spring energy charging type. The faster the contact opening speed of the movable conductors during the opening process, the better the breaking performance. However, there is a disadvantage that the durability of mechanism decreases in inverse proportion to the use of a spring capable of accumulating high energy to configure the breaking speed faster. Therefore, to simultaneously satisfy the breaking performance and mechanical endurance of the ACB, its driving mechanism must be optimized. In this study, a dynamic model of the ACB was developed using the MDO(Mechanism Dynamics Option) module of CREO, which is widely used in multibody dynamics analysis. To improve the opening velocity, the Taguchi design method was applied to optimize the design parameters of an ACB with many linkages. In addition, to evaluate the improvement in the operating characteristics, the simulation and experimental results were compared with the MDO model and improved prototype sample, respectively.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2000년도 학술발표회 발표논문집
• /
• pp.296-301
• /
• 2000

Bend test for metallic materials was conducted on samples of galvanized steel pipes being used in greenhouse farms. A secular change of yield strength for galvanized steel pipes was analyzed with the part of buried in the ground and exposed in the atmosphere. From those experimental results and corrosion rate of galvanized film, the standard durable years for pipe framed greenhouses are estimated that the small sized pipe houses of movable type is 7∼8 years and the large sized pipe houses of fixed type is 14∼15 years.

• 한국운동역학회지
• /
• 제13권2호
• /
• pp.123-137
• /
• 2003

This study is to present more effective starting skills through analysis of kinematic characteristics of starting motions in 300m Time Trials of Inline Skating. To achieve this goal, 6 athletes, 3 in the national team and 3 in business teams were chosen and their starting motions were examined with three-dimensional image analyses. The results of analyses in regard of positions and speed of the bodily center and angles, angular velocity, and linear velocity of articulations of lower limbs by sections of starting motions are as follows: In case of the central position, though it is effective to reduce the air resistance by lowering the upper part of the body maximumly, it is reasonable to accelerate by raising the upper part of the body to some degree for the running posture at the lower speed in the starting section. In the starting section, it is efficient to minimize the period of time in touching the ground. for this, it is necessary to train for taking motions without slippage while touching the ground. While 3 athletes in business teams kicked the ground as running right after the starting, the others in the national team slid on the ground. As the number of steps increased, the movable speed changed quickly. Thus the movable speed of athletes in the national team indicated big differences in two to three steps. If these factors are well supported, the push-away starting method might be better than the running starting method in terms of improvement of records.

• Wind and Structures
• /
• 제15권5호
• /
• pp.441-462
• /
• 2012

This article presents theoretical investigations on techniques for the improvement of the dynamic characteristics of slender bridges under wind action. Aerodynamically effective control shields are applied as controlled actuators. The first part of the article describes the modelling of the uncontrolled aeroelastic system. Acting aerodynamic forces are consistently characterised using linear time-invariant transfer elements in terms of rational functions. On this basis, two configuration levels of the uncontrolled system are represented with linear time-invariant state-space models and investigated. The second part of the article addresses controller design and the behaviour of the controlled aeroelastic system. Both fundamental limits for stabilisation and the efficiency for attenuating the influence of gusts are described for different actuator mechanisms. The results are derived and discussed with methods of control theory.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.480-480
• /
• 2008

Vacuum circuit breaker(VCB) is now emerging as an alternative of gas circuit breaker(GCB) which uses SF6 gas as insulating material whose dielectric strength is outstanding. But we have to reduce SF6 gas because SF6 gas is one of greenhouse gas and efforts to reduce greenhouse gas are now trend of the world. Therefore, we can say VCB is the optimal alternative of GCB because vacuum is environmentally friendly. The vacuum interrupter is the core part of VCB to interrupt arcing current. There are mainly two methods to extinguish arc. One is radial magnetic field (RMF) method and the other is axial magnetic field (AMF) method. We deals with RMF method in this paper. Compared with AMP, RMF arc quenching method has different principle to extinguish arc. In case of RMF method, pinch effect is much larger than AMF method. Because of pinch effect RMF type contact electrodes have the single large spot which is severly damaged and melted while AMF type contact electrodes have small and multiple spots which are slightly damaged and melted. To prevent contact electrode being damaged and melted from high temperature-arc, RMF method uses Lorentz force to move arc. In this paper we calculated and compared the arc driving force of two cases and we analyzed the force acting on each part of arc by means of commercial finite element method software Maxwell 3D. They have 3petals and we considered two cases. One is the case when fixed(upper) and movable(lower) contacts are in mirror arrangement (Case 1). The other is the case when one of two contacts (movable contact) is revolved at maximum angle as possible as it can be (Case 2). And at each case above, we analyzed arc driving force at two positions, position 1 is the closest to the center of contact and position 2 is near the edge of petal on fixed contact. As a result we could find that Case 2 generated stronger arc driving force than Case 1 at position 1. But at position 2 Case 1 generated stronger arc driving force than Case 2. This simulation method can contribute to optimizing spiral-type electrode designs in a view of arc driving force.

• 헤리티지:역사와 과학
• /
• 제51권4호
• /
• pp.146-169
• /
• 2018

현행 문화재보호법은 인위적이거나 자연적으로 형성된 국가적 민족적 또는 세계적 유산으로서 역사적 예술적 학술적 또는 경관적 가치가 큰 것을 문화재로 정의하고, 문화재의 성격에 따라 유형문화재, 무형문화재, 기념물, 민속문화재로 구분하고 있다. 그리고 지정주체에 따라 시 도지사가 지정하는 시 도지정문화재 및 문화재자료와 문화재청장이 지정하는 국가지정문화재가있다. 국가지정문화재의 보존 관리 정책 중 하나인 정기조사는 문화재보호법에 따라 문화재의 현상, 관리, 수리, 그 밖의 환경보전 상황 등에 관하여 3년 또는 5년 주기로 조사하는 제도로 2006년 문화재보호법에 도입되어 현재까지 해당문화재의 훼손 손상등을 사전에 발견하고 적절한 예방조치를 취하는 등 국가지정문화재의 보존 관리에 기여한 바가 크다. 그런데 2016년 제정된 국가지정문화재 정기조사 운영지침의 일부내용은 국가지정 동산문화재 정기조사 운영에 혼란을 종종 발생시켜 국가지정 동산문화재 정기조사의 체계적 관리 및 품질 제고를 위한 수정과 보완이 필요하다. 이에, 본고는 국가지정문화재 정기조사제도의 체계와 구조, 국가지정 동산문화재 정기조사 운영실태 등을 분석한 후 국가지정 동산문화재 정기조사의 체계적 관리 및 품질 제고를 위하여 국가지정문화재 정기조사 운영지침상의 정기조사 총괄 주관 실시부서 특정, 정기조사 위탁, 정기조사 서식 및 매뉴얼의 개선방안을 제시하였다. 이들 개선방안이 향후 국가지정 동산문화재 정기조사의 품질 제고와 맞춤형 조사 기록체계 구축에 일조되기를 기대한다.

• 한국방재학회 논문집
• /
• 제7권3호
• /
• pp.9-18
• /
• 2007

대부분의 중규모 이하 댐은 홍수에 취약한 필댐으로 대책마련이 시급한 상황이나 시설물의 중요도 및 예산형편 등을 이유로 안전의 사각지대에 놓여있다. 이러한 문제점에 대한 현실적인 대책으로 여수로 월류부만을 부분 개축할 경우 방류능력을 어느 정도 증대시킬 수 있는지 분석하였다. 월류부 개축모형은 래버린스 웨어(labyrinth weir)와 가동 웨어를 선정하였고, 소규모 댐을 임의 선정하여 수리모형실험과 Flow-3D를 이용한 3차원수치해석을 통해 월류수심별 방류량을 산정하였다. 개축모형별 개선효과를 분석하기 위하여 빈도별 확률홍수량과 가능최대홍수량(PMF)을 산정하였고, 저수지홍수추적을 실시하여 개축 전 후의 최고수위를 비교하였다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권7호
• /
• pp.370-378
• /
• 2002

As resent trends in structural construction have been to build taller and larger structures than any time in the past, they have had high flexibility and low damping that can cause large vibration response under severe environmental loading such as earthquakes, winds, and mechanical excitations. The damper with mass and spring is one approach to safeguarding the structure against excessive vibrations. In this paper, the lumped electrical circuit approach of mass/spring system is used to model the mechanical aspects according to the frequency. Therefore, the mass/spring system can be dealt with here and linked with the equivalent circuit of electric linear oscillatory actuator(LOA). Analysis models are two types of vibration control system, active mass damper(AMD) and hybrid mass damper(HMD). AMD consists of the moving coil LOA with mass only The LOA of HMD with mass and spring is composed of the fixed coil and the movable permanent magnet(PM) field part. The PM field part composed magnet modules and iron coke, is the damper marts itself. We Present the motional resistance and reactance of mass/spring system and the system impedance of AMD and HMD according to the frequency.

• 제어로봇시스템학회논문지
• /
• 제12권9호
• /
• pp.876-882
• /
• 2006

This study presents an ultrasonic location awareness system for the ubiquitous computing with absolute position. The flight time of ultrasonic waves is determined by a period detecting technique which is able to extend the sensing range compared with traditional methods. For location awareness, ultrasonic waves are sent successively from each ultrasonic transmitter and synchronized by radio frequency (RF) signal, where the transmitting part is fixed and the receiving part is movable. To expand the recognizing range, cell matching technique and coded ultrasonic technique are introduced. The experimentation for various distances is accomplished to verify the used period detecting technique of U-SAT system. The positioning accuracy by using cell matching is also verified by finding the locations of settled points and the usability of coded ultrasonic technique is verified. As a result, the possibility of ultrasonic location awareness system for the ubiquitous computing can be discussed as a pseudo-satellite system with low cost, a high update rate, and relatively high precision, in the places where CPS is not available.