• 펄프종이기술
• /
• 제43권1호
• /
• pp.47-56
• /
• 2011

This study was carried out to investigate the characteristics of the Hanji which had been used for movable types printing volumes of the Joseon Dynasty. A total 29 volumes which had printed with metal and wooden movable types, were examined on the physical properties, fiber morphology, and color reactions. The grammage of all of the Hanji which had been used for movable types printing volumes were $13.10-51.65g/m^2$ and on the average was $25g/m^2$. The apparent density of the Hanji was $0.23-1.65g/cm^3$ and on the average was $0.4g/cm^3$. In almost all movable types printing volumes, the Hanji had undergone Dochim which is a processing of printability improvement. Through the examination on fiber morphology and color reactions, Hanji was investigated into that all of those were made from paper mulberry bast fiber.

• 한국자동차공학회논문집
• /
• 제3권2호
• /
• pp.77-85
• /
• 1995

Among mechanical friction losses in an engine, the piston assembly and cylinder components accounts for the majority of the losses. The movable bore technique has been developed and turned out to be the most reliable technique in measuring the instantaneous friction of piston assembly. The weakness of this system, however, was the presence of the protruded top of movable bore necessary for pressure balancing. Because of the protruded part the piston could not be taken out without disassembling the crankshaft. Present study was carried out with a system of removable top of the movable bore so that it was possible to make frequent piston removals. The effects from engine speed, oil viscosity, engine load and elastic contact pressure of piston rings on the frictional characteristics have been evaluated with the improved equipment. Also, frictions of each member of piston assembly were measured.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.480-485
• /
• 2008

In this study, two types of ramjet intake were designed for the flight condition of Mach number 2 and 5 and numerical analysis was performed. In order to widen the flight envelope range(Mach number $2{\sim}6$), movable intake concept was applied. The central body was designed so that the capture area ratio which is one of most important factors of ramjet intake design could be adjusted. And various types of cowl and movable insert part of shell were designed in order to control throat area which could increase total pressure recovery. The numerical results showed that the designed ramjet intake could be applied in various flights Mach number.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.207-210
• /
• 2008

본 논문에서는 램제트 기관의 성능을 결정짓는 공기흡입구를 램제트 엔진의 비행 목적에 맞게 비행 마하속도 4에서 기본설계를 수행하였다. 순항고도 12km, Mach $2{\sim}6$의 넓은 영역에서의 운용을 가능하게 하기 위하여 가변형 공기흡입구의 개념을 도입하였다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2007년도 The 1st International Symposium on Advanced Magnetic Materials
• /
• pp.253.2-253.2
• /
• 2007

• 한국기계가공학회지
• /
• 제17권6호
• /
• pp.7-15
• /
• 2018

We propose a method for evaluating sound quality quantitatively to develop high-level home appliances (HA). Generally, a refrigerator has diverse movable parts such as slider, drawer, and folding shelf. Therefore, an engineering treatment to control the noise quality is considered as one of key technologies for a higher level refrigerator. Among the movable parts, we have selected a folding shelf as an example, which is commonly setup inside of a home refrigerator for increasing space convenience, to control the noise quality. However, it is known that its noise level is very high comparing to other movable parts when folding or unfolding actions. In order to evaluate and compare the noise quality, we have tested different eighteen models, and have suggested an impact sound quality index (ISQI) based on subjective evaluation data obtained experimentally by thirty two evaluators. The ISQI was formulated using three sound quality elements (noise peak, raising time, impact duration) to determine psycho-acoustic properties. Through this work, we developed an evaluating process and ISQI that was verified the usefulness by comparing the test results of personal perceptions given by evaluators with the prediction value of ISQI. We showed a good relations between them, so we believe that the proposed method and ISQI can be utilized to control of the noise quality of HA effectively.

• 한국기계가공학회지
• /
• 제9권1호
• /
• pp.35-41
• /
• 2010

An overload limiter is used to prevent its overturning accident during an operation of a movable crane. Recently the indirect measuring method, which measures hoisting load and overturning moment of overload limiter, demands instead of the existing method, which measures only hoisting load. The indirectly measuring method is how to conduct the hoisting load and overturning moment as measuring the load of hydraulic cylinder for a luffing driving of boom. So we need to develop the multi-angular pin type load cell with the measuring angle of ${\pm}10$ degree instead of the existing load cell with the measuring angle of ${\pm}2$ degree. In this study the finite element analysis is conducted to evaluate the effect of the aspect ratio of measuring cross section on the measuring limit of the load cell to develop the many-angular pin type load cell. For this investigation, the aspect ratio of measuring cross section and load applying angle were adopted as design parameters and the stresses of measuring part were evaluated for each parameter.

• 한국전통조경학회지
• /
• 제37권4호
• /
• pp.51-59
• /
• 2019

본 연구는 이동식 정자의 설계시공방법을 살펴보고자 문헌분석을 통해 조영 배경과 입지와 향의 설정, 규모와 구성, 재료, 시공방법 등을 분석함으로써 다음과 같은 결과를 도출하였다. 첫째, 이동식 정자는 곳곳에 펼쳐진 경승을 두루 유람하기 위해 고안된 정자로 산수를 즐기는 경험을 바탕으로 자신의 집을 소유하고 정자를 경영하는 것보다 이상적인 삶을 추구하는 방식이 반영된 창작물이었다. 둘째, 이동식 정자의 조영은 계절별, 시기별 경관을 때와 장소의 제한 없이 감상하고자 하는 의도로 조성되었으며. 풍류를 즐기기 위한 도구를 매번 옮겨야 하는 번거로움을 해소하고자 고안되었다. 셋째, 이동식 정자는 경관을 조망하기 용이한 곳을 향하여 입지와 향이 결정되며, 대부분 소규모로 조성되어 그 안에서 경관을 감상하거나, 바둑, 작시, 탄금 등을 위한 공간을 구분하였다. 또한 목재를 주로 사용하고, 하중을 저감시키기 위해 대나무나 짚, 유둔, 면포 등 가벼운 소재로 지붕과 벽면을 구성하였다. 시공방식은 결합과 해체가 용이하도록 하는 결구기법이 주로 사용되었으며, 선박이나 수레 상부에 정자를 조성할 경우에는 일반 정자의 목구조식 시공이 이루어졌다. 넷째, 일반 정자와 이동식 정자의 설계시공 특성을 비교해보면 이동식 정자는 조영목적상 경관의 관람이 용이하여 입지와 향의 설정에 제한이 없으나, 기동력을 고려하고, 구조적으로 하중을 견디기 위한 방안이 마련되어야 하며, 정자로서의 기능과 형태를 만족시켜야 하기 때문에 보다 엄격한 제도와 기법이 요구되었다.

• 대한조선학회논문집
• /
• 제43권4호
• /
• pp.422-430
• /
• 2006

The horn and movable parts around the gap of the conventional semi-spade rudder are visualized by high speed CCD camera with the frame rate of 4000 fps (frame per second) to study the unsteady cavity pattern on the rudder surface and gap. In addition, the pressure measurements are conducted on the rudder surface and inside the gap to find out the characteristics of the flow behavior. The rudder without propeller wake is tested at the range of $1.0{\leq}{\sigma}_v\;1.6$ and at the rudder deflection angle of $-8{\leq}{\theta}{\leq}10^{\circ}$. The time resolved cavity images are captured and show strong cavitation around the rudder gap in all deflection angles. As the deflection angle gets larger, the flow separated from the horn surface increases the strength of cavitation. The accelerated flow along the horn decreases its pressure and the separated flow from the horn increases the pressure abruptly. The pressure distribution inside the gap reveals the flow moving from the pressure to suction side. In the negative deflection angle, the turning area on the movable part initiates the flow separation and cavitation on it.

• 대한조선학회논문집
• /
• 제46권5호
• /
• pp.460-470
• /
• 2009

In recent practice a half round prismatic bar has fillet welded or formed through foundry work along the centerline on rear concave surface of the horn to mitigate gap flow between fixed and movable part of the rudder system. When the gap clearance has been blocked with this practice, numerical simulations indicate that the practices are not only effective in reducing the gap flow but also in mitigating the cavitation. The blocking effects are remarkably improved when a pair of blocking bar is bisymmetrically attached with respect to centerline on the opposite convex surface of the movable part. The blocking bar could be placed on the exposed surface under maximum rudder angle. This implies that the blocking bar could be easily adopted not only in a design stage but also in a maintenance stage for mitigating rudder cavitation. In addition, the numerical simulations imply that more improvements could be anticipated through the selection of section shape of prismatic bar for gap flow blocking.