• Journal of KSNVE
• /
• v.9 no.3
• /
• pp.493-501
• /
• 1999

The vibration modes of resilient mounting system and foundation structure which support diesel engine/generator set and acoustic enclosure walls play an important role in the vibration transmission process. So, it is necessary to perform vibration mode analysis of resilient mounting system and foundation structure. For some reasons, if the vibration modal analysis of resilient mounting system and foundation structure of acoustic enclosure could be simultaneously done by finite element method, it would be very efficient approach. In this paper, vibration modal analysis method using finite element method for multi stage mounting system having n d.o.f model was proposed. Vibration analysis of single and double stage resilient mounting system was performed to verify the validity of the proposed method. Also frequency response results were compared in case of rigid foundation model and finite element foundation model which was compared with experimental modal analysis results.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.4
• /
• pp.379-385
• /
• 2016

Door impact beam plays a key role in minimizing the occupant injury within the side impacted vehicle through preventing intrusion of the impacting vehicle. Steel pipe type door impact beam has been widely adopted since it has simple structure and the overall strength is easily determined according to the pipe size. The brackets welded at pipe ends connect the door impact beam and the door panels by spot welds. In this study, first, the effect of pipe thickness, bracket thickness and door mounting stiffness was respectively analyzed. Next, application of the tailor rolled pipe was examined and several alterations of the bracket mounting method were considered. Application of tailor rolled pipes with superior bracket mounting method showed remarkable strength enhancement and weight reduction possibility in comparison with the current door impact beam.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.4 no.1
• /
• pp.19-22
• /
• 2002

Rotary mountages are the best mountages among all the mountages that are used in sericultural areas. But to use this mountage more space, separate mounting hall & requires more labour to pickup the matured worms. to over come these problems, self mounting method is adopted to save the time Er labour, But the mounting rate is generally less. To accelerate the mounting rate different repellents viz; saw dust, phytoecdysone, 1% cresol with paddy husk, lime, kaolin, gormalin chaff were used in the present study. The results indicated that highest number of larvae climbed the mountage in 1% cresol with paddy husk, followed by phytoecdysone and lime. It is observed that the use of repellents at wandering stage accilerates mounting rate and did not affect the quality of the cocoons and reeling characters.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.24 no.2
• /
• pp.95-102
• /
• 2020

Electrical instruments and devices contained in cabinets for controlling nuclear power plants require seismic qualification; likewise, in-cabinet response spectrum (ICRS) is necessary. Gupta et al. (1999) suggested the Ritz method, where rocking, frame bending, and plate bending behaviors of cabinets are considered, as a method for determining ICRS. This research proposes a method to determine the rocking stiffness of cabinets, which represents its rocking behavior. The cabinet is fixed on mounting frames and is connected to the base concrete by anchors. When horizontal excitation is applied to the cabinet, the mounting frames at anchors are locally deformed, the mounting frames are bent, and then rocking in the cabinet becomes evident. A method to determine equivalent vertical spring stiffness representing the local deformation of the mounting frames at anchors is then proposed. Subsequently, the rocking stiffness of this mounting frame is calculated upon assumption of the mounting frame as an indeterminate beam.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.4 s.121
• /
• pp.350-355
• /
• 2007

Accelerometer mounting fixtures were prepared with the different materials(Ti and SUS). The dynamic characteristics of the mounting fixture were analyzed by finite element method(FEM), and the mode shape of each order and the displacement response for modelling the mounting fixture were analyzed by ANSYS, then resonant frequencies of the mounting fixtures with Ti and SUS were 22.700 and 23.390 kHz, respectively. The dynamic characteristics of the mounting fixture with the different positions were obtained by using laser interferometer. The response of the accelerometer was nearly a constant from 40 Hz to 500 Hz, but the change of the acceleration was increased with an increase of the frequency above 500 Hz.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.3151-3168
• /
• 2015

Automatic detection of estrus in cows is important in cattle management. This paper proposes a method of estrus detection by automatically checking cattle mounting. We use a side-view video camera and apply computer vision techniques to detect mounting behavior. In particular, we extract motion information to select a potential mount-up and mount-down motion and then verify the true mounting behavior by considering the direction, magnitude, and history of the mount motion. From experimental results using video data obtained from a Korean native cattle farm, we believe that the proposed method based on the abrupt change of a mounting cow's height and motion history information can be utilized for detecting mounting behavior automatically, even in the case of fence occlusion.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.6 s.99
• /
• pp.731-737
• /
• 2005

This paper evaluates dynamic performance of a cab over type large-sized truck for estimating the effects of frame's torsional characteristics using a computer model. The computer model considers two mounting methods of frame, flange mounting and web mounting. Frame is modeled by finite elements using MSC/NASTRAN In order to consider the flexibility of frame. The torsional test of the frame is conducted In order to validate the modeled finite element model. A load cell is used to measure the load applied to the frame. An angle sensor is used to measure the torsional angle. An actuator is used to apply a load to the frame. To estimate the effects of frame's torsional characteristics on dynamic performance, simulations are performed with the flange mounting and web mounting frame. Simulation results show that the web mounting frame's variations of roll angle, lateral acceleration, and yaw rate are larger than the flange mounting frame's variations, especially in the high velocity and the second part of the double lane course.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.50
• /
• pp.11-21
• /
• 1999

In this paper, an algorithm to generate the mounting position and orientation of SMD is proposed. For the proposed algorithm, we used the image captured from PCB and utilized image processing technique. Pre-processing technique, threshold level determination method, divided recognition of the SMD pattern on a PCB, calculating mounting position and orientation are related topics of this research. All of the related topics were reviewed and the results of this research were obtained from applying the algorithm to the real Surface Mounting Machine(model:MCUl/CPM) made by Samsung Electronics Co.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.30 no.2
• /
• pp.44-52
• /
• 2021

In this article, I would like to introduce the concept, detailed method, and clinical tips of cross mounting technique, which is one of the methods to accurately transmit provisional restoration information to the final restoration.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.113-116
• /
• 1996

In this paper, an algorithm to generate the mounting position and orientation of SMD is proposed. For the proposed algorithm, we used the image captured from PCB and utilized image processing technique. Pre-processing technique, threshold level determination method, divided recognition of the SMD pattern on a PCB, calculating mounting position and orientation are related topics of this research. All of the related topics were reviewed and the results of this research were obtained from applying the algorithm to the real Surface Mounting Machine(model: MCU1 /CPM) made by Samsung Electronics Co.(Ltd.)