• 제목/요약/키워드: Mountainous area

검색결과 641건 처리시간 0.029초

Centrifuge modelling of rock-socketed drilled shafts under uplift load

  • Park, Sunji;Kim, Jae-Hyun;Kim, Seok-Jung;Park, Jae-Hyun;Kwak, Ki-Seok;Kim, Dong-Soo
    • Geomechanics and Engineering
    • /
    • 제24권5호
    • /
    • pp.431-441
    • /
    • 2021
  • Rock-socketed drilled shafts are widely used to transfer the heavy loads from the superstructure especially in mountainous area. Extensive research has been done on the behavior of rock-socketed drilled shafts under compressive load. However, little attention has been paid to uplift behavior of drilled shaft in rock, which govern the overall behavior of the foundation system. In this paper, a series of centrifuge tests have been performed to investigate the uplift response of rock-socketed drilled shafts. The pull-out tests of drilled shafts installed in layered rocks having various strengths were conducted. The load-displacement response, axial load distributions in the shaft and the unit skin friction distribution under pull-out loads were investigated. The effects of the strength of rock socket on the initial stiffness, ultimate capacity and mobilization of friction of the foundation, were also examined. The results indicated that characteristics of rock-socket has a significant influence on the uplift behavior of drilled shaft. Most of the applied uplift load were carried by socketed rock when the drilled shaft was installed in the sand over rock layer, whereas substantial load was carried by both upper and lower rock layers when the drilled shaft was completely socketed into layered rock. The pattern of mobilized shaft friction and point where the maximum unit shaft friction occurred were also found to be affected by the socket condition surrounding the drilled shaft.

설악산 토양 내 황사의 퇴적과 풍화 (Dust Deposition and Weathering in Soils of Seoraksan)

  • 정기영
    • 광물과 암석
    • /
    • 제34권4호
    • /
    • pp.255-264
    • /
    • 2021
  • 한반도는 황사의 이동 경로에 있으나, 풍화와 침식이 활발한 산악 지형에서 황사의 퇴적을 확인하기는 어렵다. 이 연구에서는 설악산 알칼리장석화강암 토양의 세립실트(< 20 ㎛)에 점토광물 특성, 광물조성, 미세조직 분석을 실시하여 산악지역 토양 내 황사퇴적물의 존재 상태를 조사하였다. 이 지역 토양 세립실트는 기반암 유래 쇄설성 입자, 황사퇴적물, 그리고 이들의 풍화물로 구성되어 있다. 토양 내 황사기원 광물로 2:1 층상규산염, 녹니석, 각섬석, 녹염석, 함칼슘사장석이 확인되었다. 기반암인 알칼리장석화강암은 석영과 알칼리장석으로 구성되며, 알칼리장석 중 앨바이트가 부분적으로 풍화되어 소량의 깁사이트와 고령토 광물이 생성되었다. 산성토양환경에서 일라이트-스멕타이트 계열 2:1 층상규산염의 팽윤성 층간에 다핵 Al 양이온 종들이 교환 및 고정되어 히드록시-Al삽입점토광물이 생성되었다. 2:1 층상규산염 총량을 기준으로 평가하면 조사한 토양 세립실트 내 황사의 양은 70% 정도로 추정된다.

화산쇄설암 구간에서 터널 공사 중 장기변형거동 특성 연구 (The Characteristics of Long-term Deformation Behavior During Tunnel Excavation in the Pyroclastic Rock)

  • 장석명;한희수
    • 한국지반환경공학회 논문집
    • /
    • 제23권8호
    • /
    • pp.23-28
    • /
    • 2022
  • 우리나라 지형조건은 산악이 70%를 차지하고 있어 철도 및 도로공사 시 구조물이 차지하는 비중이 높다. 특히, 최근 들어 고속주행을 위한 고속철도와 고속도로 건설이 급증하고 있고 이와 더불어 터널 건설도 증가하고 있고 터널 굴착 완료 후 장기변형이 발생하는 터널 시공사례가 증가하는 추세이다. 이러한 터널 구조물의 안정성은 터널 굴착 주변 암반특성에 전적으로 좌우된다. 본 연구에서 대상인 화산쇄설암의 경우, 전반적으로 풍화에 취약하고 장기간에 걸쳐 강도가 저하되는 특성이 있어서 이를 고려한 터널 설계 및 시공계획 수립이 반드시 필요하다. 본 연구는 화산쇄설암 구간에 터널 현장에서 발생 된 과다변형 사례를 분석하여 향후 화산쇄설암 구간에서는 인버트 설치 및 하부보강을 고려한 방안을 제시하였다.

식생 베타 다양성의 공간화 기법 연구 - Generalized Dissimilarity Model의 국내적용 및 활용 - (Spatializing beta-diversity of vascular plants - Application of Generalized Dissimilarity Model in the Republic of Korea -)

  • 최유영
    • 한국환경복원기술학회지
    • /
    • 제25권3호
    • /
    • pp.29-45
    • /
    • 2022
  • For biodiversity conservation, the importance of beta-diversity which is changes in the composition of species according to environmental changes has become emphasized. However, given the systematic investigation of species distribution and the accumulation of large amounts of data in the Republic of Korea(ROK), research on the spatialization of beta-diversity using them is insufficient. Accordingly, this research investigated the applicability of the Generalized Dissimilarity Modeling(GDM) to ROK, which can predict and map the similarity of compositional turnover (beta-diversity) based on environmental variables. A brief overview of the statistical description on using GDM was presented, and a model was fitted using the flora distribution data(410,621points) from the National Ecosystem Survey and various environmental spatial data including climate, soil, topography, and land cover. Procedures and appropriated spatial units required to improve the explanatory power of the model were presented. As a result, it was found that geographical distance, temperature annual range, summer temperature, winter precipitation, and soil factors affect the dissimilarity of the vegetation community composition. In addition, as a result of predicting the similarity of vegetation composition across the nation, and classifying them into 20 and 100 zones, the similarity was high mainly in the central inland area, and tends to decrease toward the mountainous areas, southern coastal regions, and island including Jeju island, which means the composition of the vegetation community is unique and beta diversity is high. In addition, it was identified that the number of common species between zones decreased as the geographic distance between zones increased. It classified the spatial distribution of plant community composition in a quantitative and objective way, but additional research and verification are needed for practical application. It is expected that research on community-level biodiversity modeling in the ROK will be conducted more actively based on this study.

산업재해 감지 스마트 디바이스 설계 방안 및 성능평가를 위한 지표 도출에 관한 연구 (A Study on Design Method of Smart Device for Industrial Disaster Detection and Index Derivation for Performance Evaluation)

  • 이란희;배기태;최준회
    • 스마트미디어저널
    • /
    • 제12권3호
    • /
    • pp.120-128
    • /
    • 2023
  • 산업재해로 인한 피해를 줄이기 위해 다양한 ICT 기술이 지속적으로 개발되고 있으며, 센서, IoT, 빅데이터, 머신러닝 및 인공지능 등을 활용하여 산업재해 발생 시 피해를 최소화하고자 하는 연구가 진행되고 있다. 본 논문에서는 산업 현장의 밀폐구간, 산악, 해양, 탄광 등의 통신 음영지역에서 디바이스 간 다자간 통신 및 스마트 중계기와의 통신이 가능한 스마트 디바이스의 설계 방안을 제안한다. 제안된 스마트 디바이스는 작업자 위치, 이동 속도 등 작업자 정보와 지형, 풍향, 온도, 습도 등 환경정보를 수집하고 작업자 상호 간의 안전거리를 확보하여 위험 상황 발생 시 경고가 가능하며 헬멧에 부착할 수 있도록 설계하였다. 이를 위해, 스마트 디바이스에 필요한 기능적 요구사항과 스마트 디바이스 내의 센서와 모듈을 이용하여 요구사항을 구현하기 위한 설계 방안과 스마트 디바이스의 성능평가를 위한 지표를 도출하고 산악지역에서의 성능평가를 위한 평가환경을 제안한다.

제주도 동부 중산간지역 지하수위 예측에 적합한 인공신경망 모델의 활성화함수 연구 (A study on activation functions of Artificial Neural Network model suitable for prediction of the groundwater level in the mid-mountainous area of eastern Jeju island)

  • 신문주;김정훈;강수연;이정한;강경구
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2023년도 학술발표회
    • /
    • pp.520-520
    • /
    • 2023
  • 제주도 동부 중산간 지역은 화산암으로 구성된 지하지질로 인해 지하수위의 변동폭이 크고 변동양상이 복잡하여 인공신경망(Artificial Neural Network, ANN) 모델 등을 활용한 지하수위의 예측이 어렵다. ANN에 적용되는 활성화함수에 따라 지하수의 예측성능은 달라질 수 있으므로 활성화함수의 비교분석 후 적절한 활성화함수의 사용이 반드시 필요하다. 본 연구에서는 5개 활성화함수(sigmoid, hyperbolic tangent(tanh), Rectified Linear Unit(ReLU), Leaky Rectified Linear Unit(Leaky ReLU), Exponential Linear Unit(ELU))를 제주도 동부 중산간지역에 위치한 2개 지하수 관정에 대해 비교분석하여 최적 활성화함수 도출을 목표로 한다. 또한 최적 활성화함수를 활용한 ANN의 적용성을 평가하기 위해 최근 널리 사용되고 있는 순환신경망 모델인 Long Short-Term Memory(LSTM) 모델과 비교분석 하였다. 그 결과, 2개 관정 중 지하수위 변동폭이 상대적으로 큰 관정은 ELU 함수, 상대적으로 작은 관정은 Leaky ReLU 함수가 지하수위 예측에 적절하였다. 예측성능이 가장 낮은 활성화함수는 sigmoid 함수로 나타나 첨두 및 최저 지하수위 예측 시 사용을 지양해야 할 것으로 판단된다. 도출된 최적 활성화함수를 사용한 ANN-ELU 모델 및 ANN-Leaky ReLU 모델을 LSTM 모델과 비교분석한 결과 대등한 지하수위 예측성능을 나타내었다. 이것은 feed-forward 방식인 ANN 모델을 사용하더라도 적절한 활성화함수를 사용하면 최신 순환신경망과 대등한 결과를 도출하여 활용 가능성이 충분히 있다는 것을 의미한다. 마지막으로 LSTM 모델은 가장 적절한 예측성능을 나타내어 다양한 인공지능 모델의 예측성능 비교를 위한 기준이 되는 참고모델로 활용 가능하다. 본 연구에서 제시한 방법은 지하수위 예측과 더불어 하천수위 예측 등 다양한 시계열예측 및 분석연구에 유용하게 사용될 수 있다.

  • PDF

철도시설 부지 입체개발 유형 및 개발 방안 - 경부선 철도 입체화 사업을 대상으로 - (Multi-dimensional Development Type and Plan for Railway Facility Site - Focus on the Gyeongbu Line Railway Multi-Dimensional Project in Busan)

  • 금윤전;김종구
    • 대한토목학회논문집
    • /
    • 제43권4호
    • /
    • pp.525-533
    • /
    • 2023
  • 산지가 많은 부산시의 지형적 특성상 가용토지가 부족한 상황에서 경부선 철도까지 도심을 가로지르고 있어 생활권의 단절과 도심발전을 저해하고 있다. 이에 토지 확보를 위하여 입체개발의 필요성이 제기되고 있으며, 최근에는 경부선 철도의 지하화로 양분화 된 도시를 연결하고 토지를 효율적으로 사용할 수 있도록 하는데 관심이 증가하고 있다. 본 연구에서는 토지의 입체개발의 사례를 통해 개발유형을 분석하고, 부산시내 경부선 철도의 지하화 사업 시 메인이 되는 4개 권역(사상역, 구포역, 가야역, 부산진역)의 입체개발로 발생하는 가용토지에 효과적인 활용을 위한 시민인식조사 결과를 바탕으로 입체개발 유형별 개발방향 설정하였다. 또한 대상지 지역이 가지고 있는 지역적 특성과 현재 진행되고 있는 도시재생사업을 반영하여 철도에 의해 양분된 지역생활권의 단절 해소 및 철도시설 부지의 효율적 토지이용을 통한 입체적인 개발을 통해 철도 부지의 수평적, 수직적 공간활용의 설계방안을 제시하고자 한다.

Assessment of Flash Flood Forecasting based on SURR model using Predicted Radar Rainfall in the TaeHwa River Basin

  • Duong, Ngoc Tien;Heo, Jae-Yeong;Kim, Jeong-Bae;Bae, Deg-Hyo
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2022년도 학술발표회
    • /
    • pp.146-146
    • /
    • 2022
  • A flash flood is one of the most hazardous natural events caused by heavy rainfall in a short period of time in mountainous areas with steep slopes. Early warning of flash flood is vital to minimize damage, but challenges remain in the enhancing accuracy and reliability of flash flood forecasts. The forecasters can easily determine whether flash flood is occurred using the flash flood guidance (FFG) comparing to rainfall volume of the same duration. In terms of this, the hydrological model that can consider the basin characteristics in real time can increase the accuracy of flash flood forecasting. Also, the predicted radar rainfall has a strength for short-lead time can be useful for flash flood forecasting. Therefore, using both hydrological models and radar rainfall forecasts can improve the accuracy of flash flood forecasts. In this study, FFG was applied to simulate some flash flood events in the Taehwa river basin by using of SURR model to consider soil moisture, and applied to the flash flood forecasting using predicted radar rainfall. The hydrometeorological data are gathered from 2011 to 2021. Furthermore, radar rainfall is forecasted up to 6-hours has been used to forecast flash flood during heavy rain in August 2021, Wulsan area. The accuracy of the predicted rainfall is evaluated and the correlation between observed and predicted rainfall is analyzed for quantitative evaluation. The results show that with a short lead time (1-3hr) the result of forecast flash flood events was very close to collected information, but with a larger lead time big difference was observed. The results obtained from this study are expected to use for set up the emergency planning to prevent the damage of flash flood.

  • PDF

SWAT을 이용한 최상류 소유역 토양침식 평가: 안성 월동저수지 유역을 대상으로 (Evaluation of Soil Erosion in Small Mountainous Watersheds Using SWAT Model: A Case Study of the Woldong Catchment, Anseong)

  • 임영신;변종민;김진관
    • 한국지형학회지
    • /
    • 제28권1호
    • /
    • pp.13-33
    • /
    • 2021
  • Successful sediment management at the watershed scale requires an understanding of the erosion, transport and sedimentation processes at the specific site scale. However, studies on the sediment runoff characteristics in a small uppermost watershed, which serves as a sediment supply function, are very rare. Therefore, this study attempted to investigate the fluctuations in major sediment supply areas and sediment runoff in the uppermost mountain small watershed, and for this purpose, ArcSWAT (Soil and Water Assessment Tools with GIS interface) was applied to the Woldong reservoir catchment located in Gosam-myeon, Anseong-si, Gyeonggi-do. The model results were manually calibrated using the monitoring data of the Woldong reservoir sedimentation rate from 2005 to 2007. It was estimated that annual average of 34.4 tons/year of sediment was discharged from the Woldong reservoir basin. This estimate almost coincided with the monitoring data of the Woldong reservoir during the low flow period but tended to be somewhat underestimated during the high flow period. Although the SWAT model does not fully reflect the erosion process of gully and in-channel, this underestimation is probably due to the spatial connectivity of sediment transport and the storage and reactivation of the sediment being transported. Most of the forested hillslopes with a well-developed organic horizon were evaluated as having a low risk of erosion, while the places with the highest risk of erosion were predicted to be distributed in the logged area with some weeds or shrubs (classified as pasture) with relatively steeper slopes, and in the bare land. The results of this study are expected to be useful in developing strategies for sediment control and reservoir management.

드론의 3D 촬영 경로를 이용한 정사영상 제작 (Ortho-image Generation using 3D Flight Route of Drone)

  • 윤종현;김기홍;최현
    • 한국산업융합학회 논문집
    • /
    • 제26권5호
    • /
    • pp.775-784
    • /
    • 2023
  • Drone images are being used more and more actively in the fields of surveying and spatial information, and are rapidly replacing existing aerial and satellite images. The technology of quickly acquiring real-time data at low cost and processing it is now being applied to actual industries beyond research. However, there are also problems encountered as this progresses. When high-resolution spatial information is acquired using a general 2D flight plan for a terrain with sever undulations, problems arise due to the difference in resolution of the data. In particular, when a low-altitude high-resolution image is taken using a drone in a mountainous or steep terrain, there may be a problem in image matching due to a resolution difference caused by terrain undulations. This problem occurs because a drone acquires data while flying on a 2D plane at a fixed altitude, just like conventional aerial photography. In order to acquire high-quality 3D data using a drone, the scale difference for the shooting distance should be considered. In addition, in order to obtain facade images of large structures, it is necessary to take images in 3D space. In this study, in order to improve the disadvantages of the 2D flight method, a 3D flight plan was established for the study area, and it was confirmed that high-quality 3D spatial information could be obtained in this way.