• Journal of the Korean Geosynthetics Society
• /
• 제19권3호
• /
• pp.1-8
• /
• 2020

In this study, numerical analysis of debris flow was performed using the SPH (Smoothed Particle Hydrodynamics) technique to analyze the mechanism of debris flow, and the applicability of soil parameters was verified by comparison with previous studies. In addition, after performing aerial photographic survey using a drone, a topographic model was created based on this survey to check the applicability of the site to the valley part of Jagul Mountain basin. And after numerical analysis of debris flow was performed using NFLOW, and the result was compared and analyzed with the existing satellite image based method. As a result of this study, the numerical analysis method using drone image and NFLOW was found to have a higher applicability to predicting the impact of debris flow, because it can reflect the actual topography better than the existing method based on satellite imagery. Therefore, it is considered that this study can be used as basic data to establish the preventive measures for debris flow such as location selection of the eruption control dam.

• Journal of Industrial Convergence
• /
• 제22권7호
• /
• pp.15-21
• /
• 2024

A hiking stick is generally one of the walking aids that allow hikers to walk while relying on their own bodies when walking. A rechargeable battery must be built into the hiking stick, which is an auxiliary device, in order to perform various functions. A separate power supply is required to charge the rechargeable battery. This study is about a self-generated power supply and develops a power generation device using a screw with higher power generation efficiency than the existing method. It is differentiated from the method suggested in this study by comparing and analyzing it with the existing power generation method, and identifying problems therewith. The screw-type power generation device generates power when the climbing stick comes into contact with the ground and when it is separated from the ground. The built-in power generation device does not require a separate power supply, and it can be used by attaching the role of a mobile phone auxiliary battery and a lighting lamp, and it has the effect of being able to find it through location tracking by embedding a GPS sensor, etc., and using lighting to keep the user safe in emergency situations such as distress. The existing generator with built-in mountain climbing stick is difficult to charge due to very weak current and low practicality, but the generator developed in this research could achieve high efficiency to obtain a sufficient current, so it is possible to charge a battery and practicality.

• Journal of the Korean Geographical Society
• /
• 제51권4호
• /
• pp.509-523
• /
• 2016

The soil prediction can provide quantitative soil information for sustainable mountainous ecosystem management. Visible near infrared spectroscopy, one of soil prediction methods, has been applied to predict several soil properties with effective costs, rapid and nondesctructive analysis, and satisfactory accuracy. Spectral preprocessing is a essential procedure to correct noisy spectra for visible near infrared spectroscopy. However, there are no attempts to evaluate various spectral preprocessing methods. We tested 5 different pretreatments, namely continuum removal, Savitzky-Golay filter, discrete wavelet transform, 1st derivative, and 2nd derivative to predict soil carbon(C) and nitrogen(N). Partial least squares regression was used for the prediction method. The total of 153 soil samples was split into 122 samples for calibration and 31 samples for validation. In the all range, absorption was increased with increasing C contents. Specifically, the visible region (650nm and 700nm) showed high values of the correlation coefficient with soil C and N contents. For spectral preprocessing methods, continuum removal had the highest prediction accuracy(Root Mean Square Error) for C(9.53mg/g) and N(0.79mg/g). Therefore, continuum removal was selected as the best preprocessing method. Additionally, there were no distinct differences between Savitzky-Golay filter and discrete wavelet transform for visual assessment and the methods showed similar validation results. According to the results, we also recommended Savitzky-Golay filter that is a simple pre-treatment with continuum removal.

• Journal of the Korean GEO-environmental Society
• /
• 제15권12호
• /
• pp.109-115
• /
• 2014

The purpose of this study is to estimate the sediment volume concentration of the liquified-solid mixture which is included fine sediment fractions, according to the variance of the channel slope and the water supply. The numerical model was performed by using the Finite Differential Element Method (FDM) based on the equation for the mass conservation, momentum conservation and the equation of coarse sediment an fine sediment. In comparison of varying the channel slope, the deeper the channel slope, the inflection point of the sediment concentration was occurred rapidly. In comparison of variance of the water supply, as the water supply increases fluctuation with high sediment concentration. In this situation, debris flow changes to the turbulent flow and the sediment becomes to be floated. In comparison varying the length paved saturated sediment, the longer the length, the high concentration of sediment occurred, for the safety of the slope it is needed to check the possibility of the erosion in the slope by debris flow. The results of this study will provide useful information in predicting of the disaster by the liquified-solid mixture and in prevention of the debris flow with various the slope in the mountain side.

• Journal of the Korean GEO-environmental Society
• /
• 제14권11호
• /
• pp.5-12
• /
• 2013

The purpose of this study is to estimate the behavior and the mechanism of debris flow at the end of mountain side when a berm was set on the inclined plane. The numerical model was performed by using the Finite Difference Method(FDM) based on the equation for the mass conservation and momentum conservation. In order to measure the behavior of the debris flow, the debris flow of a straight channel slope and the debris flow of channel slope with 3 types of berms were compared. First, the flow discharge and the sediment volume concentration at the downstream of the channel slope, depending on the various berm width and the different inflow discharges at the upstream of the channel were analyzed. The longer the berm width, the flow discharge at the downstream of the channel was decreased and the high flow fluctuation was reduced by a berm. And it means that a berm can effect for the delay of the debris flow. Through Root Mean Square ratio(RMS) comparison, the flow discharge of the channel slope with a berm was lower than that of a straight channel slope. The longer the berm width, for the sediment volume concentration, an inflection point did not show but mild curve. Because the low sediment concentration with water mixture by a berm continuously flow at the downstream end, it will be effect for reducing the disaster caused by debris flow. The results of this study will provide useful information in predicting and preventing disaster caused by the debris flow.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• 제31권6_1호
• /
• pp.471-481
• /
• 2013

Recently, the frequency of debris flow disaster has increased, which is one of the natural disasters during extremely heavy rainfall condition. This paper described the analysis method about deposition characteristics of debris flow using topographic characteristics of debris flow path. First, we observed topographic changes by differencing high- resolution LiDAR DEMs acquired before and after the occurrence of debris flow event. We assumed that deposition on outside of debris flow path was generated by movements due to the inertia of debris flows. Then, we analyzed three topographic characteristics of debris flow path: slope in flow direction, transition angle of flow path, and the net efficiency(L/H) of debris flows defined by the ratio of transport length(L) and elevation difference(H). We applied this method to Umyeon Mountain debris flow event in July 2011. The results showed that deposition on outside of debris flow path due to the inertia of debris flows was significantly related to the transition angle of debris flow path. Also, we figured out that there were more frequent such depositions in locations where the ratio of 'transition angle / (L/H)' is over 8.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• 제3권3호
• /
• pp.183-192
• /
• 2005

Natural ventilation in radioactive waste repositories is considered to be less efficient than mechanically forced ventilation for the repository working environment and hygiene & safety of the public at large, for example, controlling the exposure of airborne radioactive particulate matter. It is, however, considered to play an important role and may be fairly efficient for maintaining environmental conditions of the repository over the duration of its lifetime, for example, moisture content and radon (Rn) gas elimination in repository. This paper describes the feasibility of using natural ventilation which can be generated in the repository itself, depending on the conditions of the natural environment during the periods of repository construction and operation. Evidences from natural cave analogues, actual measurements of natural ventilation pressures in mountain traffic tunnels with vertical shafts, and calculations of airflow rates with given natural ventilation pressures indicate possible benefits from passive ventilation for the prospective Korean radioactive waste repository. Natural ventilation may provide engineers with a cost-efficient method for heat and moisture transfer, and radon (Rn) gas elimination in a radioactive waste repository. The overall thermal performance of the repository may be improved. The dry-out period may be extended, and the seepage flux likely would be decreased.

• The Journal of the Korea Contents Association
• /
• 제9권11호
• /
• pp.407-415
• /
• 2009

In this research, to identify the degree of preference and participation in leisure sports, over 19-year-old adults living in the capital region were collected as subjects, and among them, 250 persons were chosen by purposive sampling method. Using SPSSWIN 16.0, I analyzed the collected data by reliability analysis, paired sample t-test, PPA(preference performance analysis) method. The conclusion is the following. First, the first quadrant showed wind surfing, skins-cuba, water-ski, and yacht, and as a result of this, it is necessary to improve the degree of participation in this field, the second quadrant showed golf, racketball snow board, ski, fishing, and climbing, and these field need to specific attention to maintain continuous attention, for they have a great deal of attendance, the third quadrant, showed water sleigh, cart, balloon, sky-diving, orienteering, hang gliding, model plane, and survival game. As the degree of preference and participation in these sports is low, it is recommended that more effort should be made for these sports. Finally, in the forth quadrant, there are tracking, mountain bike, inline skates, rafting, and cycling. As it's the participation is high, while that of preference is low, it is important to maintain the policy of the participation in leisure sports. Sencondly, the degree of preference and participation in leisure sport activicties acording to socio demographic characteristics differentiate.

• Spatial Information Research
• /
• 제21권1호
• /
• pp.63-73
• /
• 2013

Geographic features are reflected in satellite images, which contain characteristic elements. Information on changes can be obtained through a comparison of images taken at different times. If multi-temporal images can be classified through the use of an unsupervised method, this is likely to improve the accuracy of image classification and contribute to various applications. A rule-based image classification algorithm for automatic processing without human involvement has been developed, but it must be verified that its results are not affected by imperfect elements. In this study, Landsat images of Jeju Island were used to carry out a rule-based image classification. The application results were examined for complex cases, including the presence of clouds in the images, different photographed times, and the type of target area, such as city, mountain, or field. The presence of clouds did not affect calculations, and appropriate classification rules were applied, depending on the different photographed times. The expansion of the urban areas of Jeju and the increase of facilities such as vinyl greenhouses in Seoguipo were identified. Furthermore, space information changes and accurate classifications for Jeju Island were obtained. With the goal of performing high-quality unsupervised classifications, measures to generalize and improve the methods employed were searched for. The findings of this study could be used in time-series analyses of images for various applications, including urban development and environmental change monitoring.

• Korean journal of applied entomology
• /
• 제24권1호
• /
• pp.25-28
• /
• 1985

Experiments were carried out to investigate the life cycle of the rice leaf beetle (RLB), (Oulema oryzae KUWAYAMA) ,yield losses by its damages, and control method in $1976{\sim}1983$ at the experimental field of Gangweon PORD. Peak occurrence of adult and larva rice beetle was late May and mid-June, respectively. Adult overwintered in the forest of mountain and move into the paddy field to lay eggs on the rice leaf from late seedling stage. A female adult laid eggs for 2 days, and egg, larval and pupal period was 9, 16, and 9 days, respectively. Leersia japonica MAKINO was damaged slightly by the beetle. The yield reduction by artifical defoliation ranged from 6 to 40% and yield reduction increased as leaf feeding delayed until mid-July. All insecicides show 100% of control value against RLB.