• 한국자동차공학회논문집
• /
• 제15권1호
• /
• pp.125-132
• /
• 2007

Within the framework of brake-by-wire technology, this paper presents five types of novel models of electro-mechanical disk brake calipers with self-servo mechanism which provides self-servo effect of boosting a friction force generated between the brake pad and the rotor disk surface. The models have been developed utilizing patent map analysis results of previous invents of electro-mechanical brake calipers. The feasibility of the developed motor-driven brake caliper models have been validated through the dynamic simulation analysis. Among the developed models, the caliper mechanism with separated pressure plate was designed especially in detail and was made as a pilot. The pilot caliper has been installed on the simple test bed constructed with domestic passenger car brake components, and its function and effectiveness have been validated through several types of experimental tests.

• 제어로봇시스템학회논문지
• /
• 제21권2호
• /
• pp.137-144
• /
• 2015

In hybrid or electric vehicles, the hydraulic brake system must be controlled cooperatively with the traction motor for regenerative braking. Recently, a motor driven brake system with a PMSM (Permanent Magnet Synchronous Motor) has replaced conventional vacuum boosters to increase regenerative power. Unlike industry motor controls, additional source codes such as functional safety are essential in automotive applications to meet ISO26262 standards. Therefore, the control logic execution time increases, which also causes an extension of the motor current control period. The increased current control period makes precise motor current control challenging inhigh speed ranges where the motor is driven by high frequency. In this paper, a PWM update strategy and a time delay compensation method are suggested to improve current control and system performance. The proposed methods are experimentally verified.

• 유공압시스템학회논문집
• /
• 제7권2호
• /
• pp.19-26
• /
• 2010

The typical trunk lid system for vehicle is composed of a hinge having 4-bar link and gas lifter. Here, the energy regenerative brake of hydraulic driven systems is applied to the tail gate system for vehicle and removed the gas lifter. The new tail gate system is composed of a hydraulic pump by electric motor, a hydraulic motor, four check valves, an accumulator, a relief valve and a directional control valve. The dynamic characteristics of the hydraulic motor system, such as the surge pressure and response time, are investigated in both brake action and acceleration action. The capacity selection method of accumulator by mathematical model is based upon trial and error approach and computer simulation by AMEsim software is carried out.

• 한국생산제조학회지
• /
• 제9권4호
• /
• pp.137-146
• /
• 2000

The hydraulic energy regnerative brake systems is introduced in this work. An accumulator stores kinetic energy during braking action, and the stored energy is used in a following acceleration action. The dynamic model of the brake system is derived for computer simulation study, and the Runge-Kutta numerical integration method is applied to the simulation work. Since the model contains several unknown parameters, these were determined by data which had been proceeded. Through a series of computer simulation , dynamic performance of the energy regenerative brake system is compared with that of a conventional system in which a conventional brake circuit is used. A series of test is carried out in the laboratory. The dynamic characteristics of the hydraulic motor system, such as the surge pressure and response time, are investigated in both brake action and acceleration action.

• 한국산학기술학회논문지
• /
• 제14권2호
• /
• pp.822-827
• /
• 2013

본 논문에서는 정지시까지 전기제동을 하는 축소모형 추진시스템을 설계하고 제작하여 실험하였으며, 정지순간 제동토오크의 제어방법을 제안하였다. 또한, 레졸바를 사용한 회전자의 위치와 속도를 추정하는 관측기에 의하여 극저속에서 속도를 검출하는 방법을 개발하였으며, 또한 정지순간 제동 토오크의 감소와 동시에 공기 브레이크의 동작을 개시하여 블렌딩 제동을 사용하는 방법과 비교하여, 정지시까지 전기제동만을 사용하는 향상된 제동방법을 제안하였다.

• 한국항행학회논문지
• /
• 제14권5호
• /
• pp.760-766
• /
• 2010

본 논문에서는 유압 비례 제어 밸브로 구동되는 유압모터 부하계에 존재하는 정지마찰토크와 점성마찰토크를 해석하였다. 이에 기초 실험으로 유압시스템의 에너지인 압력과 유량에 대한 특성실험을 수행하였고, 공압브레이크 시스템을 이용하여 브레이크 압력의 변화를 인가하여 마찰토크의 변화를 실험하였다. 비선형마찰과 선형마찰에 대한 해석은 유압 시스템의 마찰특성에 대하여 수행하였다.

• 한국산학기술학회논문지
• /
• 제13권2호
• /
• pp.760-771
• /
• 2012

본 연구는 전동차를 운전 시, 영구 자석형 동기전동기(PMSM)가 제동할 때 발생한 회생전력은 모두 활용하며, 전기제동에 대하여도 발생한 회생전력을 모두 흡수할 수 있는 능력을 가진 축소모형 전동기 시스템으로 운전함을 가정한다. 축소모형 전동기의 견인시스템은 각 전동기는 영구 자석형 동기전동기(PMSM)를 개별로 제어하는 1C1M방식으로 구축 하였다. 전동차의 승차감 향상 및 에너지의 효율적 이용 등을 위한 방법으로써 벡터제어 방법을 적용하여 관성부하에 대한 시뮬레이션과 축소모형으로 실험을 하여 좋은 결과를 얻었다. 또한, 영구 자석형 동기전동기(PMSM)의 제동력 확보에 의한 회생제동 제어 확보와 전기제동으로 정지하는 극 저속에서의 속도검출과 전동기를 제어하는 방법의 알고리즘에 대하여 연구 하였다.

• 제어로봇시스템학회논문지
• /
• 제16권5호
• /
• pp.446-455
• /
• 2010

The research presented covers the design and control method of unmanned ground vehicle (UGV). An electric vehicle is used and is driven by DC motor. The power system on the UGV has been adjusted and actuators have been installed for steering and brake automation. A toggle switch is implemented to easily switch between manual and autonomous states. The UGV state is monitored by a velocity sensor, as well as steering and brake position sensors. An emergency stop device was designed and installed to quickly and safely stop the UGV. Different control methods, including the PID controller, were studied for improved steering responsiveness, and results were confirmed through experimentation. Satisfactory performance was achieved and several possible areas of future research have arisen.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.225-230
• /
• 2002

Machine of textiles let off is equipment supplying constantly fabrics. Nowdays, as it is replaced band - brake type with hydraulic motor driven type, we looked into characteristic of hydraulic solenoid pilot direction valve(SPDV) for controlling acceleration performance of hydraulic motor. This study deals with controlling the initial speed of textiles let off machine. Finally, to control the initial speed of hydraulic motor, we controlled the adjustment screw of SPDV by a hand. Test which was carried out in the laboratory shows that initial speed of textiles let off could be improved by controlling adjustment screw of SPDV. Also, the results of experiment work were compared with dynamic characteristic of other on/off solenoid direction valve(SDV).

• 한국소음진동공학회논문집
• /
• 제25권6호
• /
• pp.414-419
• /
• 2015

Recently, commercial ships and other specialized vessels with electric propulsion system employ variable speed induction motor as its prime mover. The wide application of electrical motors also includes being the main drive system in most industrial machineries. However, during its start-up, shutdown, and brake switch operation, excessive torque variation are generated. As such, flexible coupling are installed in order to reduce the transmitted torque fluctuation to the driven side. In this paper, the pulse torque generated by an variable speed induction motor was analyzed theoretically and through measurement of torsional vibration. Induction motor with inverter on marine propulsion system and industrial compressor were used as experimental subjects. The study confirmed that pulse torque are generated regardless of motor speed and interpreted as a vibration source of the whole system. Results presented herein can be adopted as the basis in future amendment of inspection classifying body regulations.