• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.80-82
• /
• 2004

The single phase switched reluctance motor(SRM) is more simpler and robust in the structure than poly phase SRM. It has the merits that it reduces the switching elements and the energy density per volume is very high. Recently, it has been researched and developed in various types and starting method due to the technique of power electronics and the computer added design. This paper presents a analytical representation of the phase inductance of a single phase SRM, as function of position and current, taking into account the non-linearity of the magnetic circuit. the method is based on Fourier series expansion. Analytical expressions for the calculation of instantaneous phase inductance, flux linkage, coenergy and electromagnetic torque as a function of rotor position and winding currents are derived.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.311-312
• /
• 2008

장거리 배전선로를 이용하여 대용량의 모터펌프를 기동할 경우 상대적으로 큰 임피던스 전압강하에 따른 모터의 기동불능 및 기동지연 등의 현상이 발생할 가능성이 있다. 본 논문에서는 K-water D 취수장에서 운영중인 2200kW 모터 기동시 발생하는 이상 현상에 대한 원인을 분석하고 이에 대한 해결책을 제시하였다. 특히 장거리 배전선로 환경하에서의 모터 기동시 문제점에 대한 해결책을 제시하기 위해 PTW를 이용하여 시뮬레이션하였다.

• 대한기계학회논문집B
• /
• 제27권7호
• /
• pp.929-937
• /
• 2003

In general, the electric motor for driving the centrifuge of Decanter type is selected based on the power(starting power) necessary to start the bowl and the screw shaft. However the operation cost of the machine is dependent on the power needed at a steadily operating condition, including the power against the bearing friction and that for the sludge removal. In this paper, the formulation for the sludge-removal power is presented. Sample calculation for a specific design shows that the sludge-removal power is increased with the friction coefficient. It also reveals that the power is mainly dependent on the length of the screw blade rather than the beach angle. Further it is shown that the power increases in square of the rotational speed of the machine.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.88-90
• /
• 2003

SRM has a characteristic of a robust, simple structure and wide operating ranges. So, recently it has studied and developed in many kinds and forms with the technology of power electronics and analysis and design by use of computer. Also, It is used in a very wide range of industrial applications. In particular, single phase switched reluctance motor has a merit in practical use because it has simple operating drives and control systems, very high energy density per unit volume comparing with three phase SRM. But it must have a starting device. In this paper design procedures of single phase SRM development for blower drives are presented. It is selected the design parameters by compared with design theory of general electric machine and poly phase SRM. Also it is simulated the designed prototype model by FEM for the prediction of characteristics.

• 조명전기설비학회논문지
• /
• 제24권10호
• /
• pp.143-148
• /
• 2010

Recently, the KEPCO is constructing the PQMS(Power Quality Monitoring System) each of the distribution line and will establish the voltage sag standard based on the long time measurement data of PQMS. The voltage sag prospect is difficult for the power system manager, however, the voltage sag forecasted is very important because the damage effect of the voltage sag is very broad. This paper describes the prospect formula of the voltage sag magnitude in the PCC(Point Common Coupling) by the starting current when the high capacity equipment is connected with the distribution line. To achieve this, this paper has proposed the sag prospect formula revision of KEPCO for the reliability improvement and the proposed formula has been applied the voltage sag real case to inspect the calculation procedure and reliability.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.44-46
• /
• 2005

대용량 유도전동기가 정지상태에서 기동할때 매우 큰 돌입전류에 의해 Voltage Sag를 유발하게 되며 유도전동기에 걸리는 기계적 토크보다 큰 전기적 토크가 가해지지 않으면 유도전동기는 기동에 실패하게 된다. 따라서 대용량 유도전동기의 기동을 위해서는 Voltage Sag를 줄이고 전동기의 가속에 필요한 기동토크를 인가할 수 있는 기동법이 필요하다. 본 논문에서는 유도전동기의 기동특성을 모의할 수 있는 모델링 기법을 제안하고 시뮬레이션에 의한 기동특성을 모의하여 적절한 기동법을 적용한다. 본 논문에서 사용한 대상 유도전동기는 한국수자원공사 취수장에서 운영하는 2500KVA 대용량 유도전동기를 사용하였으며 PSCAD/EMTDC 소프트웨어를 사용하여 시뮬레이션을 수행하였다.

• 한국산업융합학회 논문집
• /
• 제26권6_3호
• /
• pp.1223-1231
• /
• 2023

In the case of internal combustion engine vehicles, transmissions are essential for various reasons, such as vehicle starting and speed control. However, in the case of electric vehicles, unlike internal combustion engine vehicles, a transmission is not necessarily required. Of course, considering the efficiency of electric vehicles, a transmission is necessary, but installing the existing transmission as is has the opposite effect due to increased vehicle weight, so it has not been considered so far. In this paper, a non-contact reducer type using the Arago disc effect is proposed rather than a transmission using a conventional gear train, and the aim is to examine whether this can increase the driving efficiency of electric vehicles while minimizing weight. In addition, the effectiveness of the proposed reducer will be verified by manufacturing and testing it.

• 한국산학기술학회논문지
• /
• 제18권6호
• /
• pp.703-709
• /
• 2017

한국형 기동헬기(이하 수리온) 사업은 군이 운용중인 노후헬기를 국산헬기로 대체하기 위하여 연구개발한 사업으로 소요군의 전투력 향상과 운용, 유지 경제성을 고려한 사업이다. 수리온 보조동력장치는 주 발전기의 고장 시 장착 된 교류발전기로 체계에 비상 전원을 공급하는 장치이며 시동모터는 배터리의 전기적 에너지를 기계적 회전에너지로 변환 하여 보조동력장치 엔진을 회전시키는 장치이다. 수리온의 전력화 및 운용이 지속됨에 따라 시동모터의 결함이 발견되었고 이를 해소하기 위한 개선 활동을 진행하였다. 고장모드 분석에서는 결함발생에 대한 현상을 확인하고 결함원인을 5가지로 분류하였다. 5가지 인자에 대한 분석결과 결함의 주요 원인은 기계적 마모이며 이는 스프링 압력과 관련이 있다는 사실을 확인 하였다. 이론적으로 결정 된 압력조절을 통해 250회의 시험검증을 수행하였고 4개의 샘플링 마모량으로 회귀분석을 수행한 결과 모두 0.05이하의 유의수준을 보였기에 대립가설을 채택 하였다. 결론적으로 브러쉬 이상마모와 마모로 인한 파손은 압력조절을 통해 해결할 수 있었으며 시험을 통해 마모량 예측 및 결과 타당성을 확인 할 수 있었다.

• The Journal of Asian Finance, Economics and Business
• /
• 제9권9호
• /
• pp.271-281
• /
• 2022

The objectives of the research are to study the effects of emotional intelligence (EI), reward management (RM), and occupational health and safety (OHS), on employee performance (EP) within a Thai motor service and repair firm. Starting in January 2022 through the end of March 2022, the researchers used simple random sampling techniques to select 88 employees for the case study. The research instrument was a questionnaire with an IOC value between 0.67-1.00 and a reliability value α of 0.78. Survey participants were asked to contribute their opinions to a five-level opinion survey which was hosted on Google Forms. Descriptive statistics analysis (mean and standard deviation) and multiple linear regression analysis were done using SPSS for Windows version 21. The results showed that employee opinions concerning EI, RM, OHS, and EP were at a high level, with the three hypotheses testing showing statistical significance (p ≤ 0.01). The decision coefficients (R²) all revealed relationship strength with RM = 0.861, OHS = 0.853, and EI = 0.731.

• Journal of Acupuncture Research
• /
• 제21권6호
• /
• pp.177-186
• /
• 2004

Introduction : Recent studies Suggested that there is a strong correlation between acupuncture stimulation and its related cortical activation. Anther study showed that either positive or negative BOLD effects could be observed depending on anatomical structure in acupuncture stimulation. In ttis study, we investigated a new acupoint $KI_6$ (照海), which was known as motor-related acupoint and obtained an evidence that the stimulation of $KI_6$ resulted in either negative or positive BOLD response to stimulation. Methods & Results : 1. Subjects and paradigms : Two separate stimulation paradigms were performed on five healthy (aged 22-23 yrs) in this study. First, the paradigm of acupuncture stimulation was that the acupuncture needle was inserted in acupoints $KI_6$, which is located in lateral side of the foot and then continuously twisted(補瀉를 除外한 捻轉法) for 70 seconds for 10 cycles of activation. During rest period (70 seconds), the needle was completed removed from acupoint. Total 60 cycles were performed and 10 images were obtained per cycle. Second, nonacupoint was randomly selected and the same paradigm was performed as acupoint stimulation. The stimulation protocol comprised 10 cycles of alternating. activation and rest (10 images per cycle). Total 60 cycles were performed and each cycle take about 1.5 sec for motor task. Subjects take an at least 15 minutes break before starting anther paradigm. 2. fMRI mapping : Multi-slice functional images were obtained on a 1.5T Magnetom Vision MRI scanner (Simens Medical, Erlangen, Germany) equipped with high performance whole-body gradients. The BOLD T2 * - weighted images were acquired with acho planar imaging sequence (TR = 1.2 sec, TE = 60 msec, and flip angle = $90_{\circ}$). The other sequence parameter are : FOV = 210 mm, matrix=$64{\times}128$ or $64{\times}64$, slice number=10 and slice thickness = 5 or 8 mm. the anatomic images were obtained with Spin-echo T1-weighted images. The resulting images were then anaiyzed with STIMULATE (CMRR, U. of Minnesota) to generate functional maps using a student T-test (p < 0.005) and cluster analysis. Both positive and negative response were evaluated. Conclusions : We have observed the activation of the motor cortex by stimulating motor-related acupoint ($KI_6$). Among five subjects, negative BOLD response was shown in four and positive response in one. All subjects showed positive response to conventional finger flexion-extension task. To understand the detailed mechanisms of correlation between acupuncture stimulation and BOLD fMRI changes and two typs of response, further study strongly required.