• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1999년도 학술대회논문집-국제 전기방전 및 플라즈마 심포지엄 Proceedings of 1999 KIIEE Annual Conference-International Symposium of Electrical Discharge and Plasma
• /
• pp.279-284
• /
• 1999

Although the switched reluctance motor (SRM) has a several advantages such as simple magnetic structure, robustness, wide range of speed characteristics and simple driving, it has a considerable inherent torque ripple and speed variation duet to the driving characteristics of pulse current waveform and the nonlinear inductance profile. The high torque ripple and speed variation inhibits wide application. The minimization of the torque ripple is very important in high performance servo drive applications, which require smooth operation with minimum torque pulsations. This paper presents the new SRM torque modeling technique for the control of instantaneous torque. The SRM is modeled by the database of torque profiles for every small variation in currents and rotor angles, which is inferred from the several measured data by the adaptive neuro-fuzzy inference technique. Simulation results demonstrating the effectiveness of proposed torque modeling technique are presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.48-50
• /
• 2001

This paper presents the switching angle and the 1/2-phase hybrid exciting method to minimize torque ripple in the 6/4 Switched Reluctance Motor (SRM). The inductance in SRM is dependent on rotor position and current. Therefore, the inductance profile is expressed as an approximate function based on FEM data. And then, the dynamic characteristics are simulated by Matlab simulink using the derived inductance function. The torque ripple resulting from single phase exciting and 1/2-phase hybrid exciting is compared.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 추계학술대회 논문집
• /
• pp.213-214
• /
• 2015

In this paper, a novel method of sensorless control scheme is proposed to apply on a single phase hybrid SRM used in high speed operation. The proposed method utilizes beneficially permanent magnet field whose performance is motor parameter independent to estimate the rotor position. The differential value of back-EMF is used to detect its peak point when there is no current conducting in the winding. Through this approach, the adjustable turn on/off position can be achieved without prior knowledge of inductance profile which is always employed by many sensorless schemes. And this paper may offer an available method to do the sensorless control in hybrid SRM used for high speed running.

• 한국정보통신학회논문지
• /
• 제19권11호
• /
• pp.2689-2696
• /
• 2015

방사선 진단에 사용되는 방사성동위원소 중 사이클로트론을 이용해 생산되는 방사성동위원소는 사이클로트론에서 인출된 양성자 빔이 타겟에 조사될 때 빔의 크기와 모양, 조사되는 위치에서 빔 균일 정도에 따라 생산 수율에 영향을 받는다. 이에 본 논문에서는 사이클로트론 빔 라인에서 빔의 단면을 측정할 수 있는 BPM(Beam Profile Monitor)장치를 개발하였다. LabView로 BPM장치를 원격 제어할 수 있도록 구성하였으며 BPM 프로그램을 이용하여 X축과 Y축으로 텅스텐 와이어를 스캔하면서 얻은 빔의 수치 정보를 2차원 그래프와 3차원 빔 분포 그래프로 표시하여 해석을 쉽게 모니터링 할 수 있도록 하였다. 빔을 측정하는 데 걸리는 시간은 스텝 모터 구동 속도가 2000pps일 때 37초가 걸린다는 것을 확인 할 수 있었다. 측정된 빔 분포정보를 기반으로 빔 재조정을 통해 빔 분포를 최적화함으로써 방사성동위원소 생산 수율을 극대화 시킬 수 있고 공급 안정화에도 기여하리라 본다.

• 전자공학회논문지
• /
• 제50권7호
• /
• pp.109-114
• /
• 2013

전력 MOSFET(산화물-반도체 전위 효과 트랜지스터)는 BLDC 모터와 전력 모듈 등에 광범위하게 사용하고 있다. 기존 전력 MOSFET 구조는 온-저항과 항복전압사이에 절충(tradeoff)이 필요하다. 이러한 절충을 하지 않고 최적화를 하기위해 비균일 초접합 트랜치 MOSFET 를 설계하는데 동일한 항복전압에서 균일 초접합 트랜치 MOSFET보다 낮은 온-저항을 갖도록한다. 이를 위해 드리프트 영역에서 우수한 전기장 분포를 달성하기 위하여 선형구조의 도핑 프로파일을 제안하고, 단위 셀 설계, 도핑농도의 특성분석, 전위분포를 SILVACO TCAD 2D인 Atlas 소자 소프트웨어를 사용하여 시뮬에이션을 수행하였다. 결과로 100V 급 MOSFET에서 비균일 초접합 트랜치 MOSFET가 균일 초접합 트랜치 MOSFET보다 온-저항에서 우수한 특성을 보여주고 있다.

• 한국자동차공학회논문집
• /
• 제19권6호
• /
• pp.68-75
• /
• 2011

A vehicle fuel economy is very important issue in view of fuel cost and environmental regulation. It has been improved according to the performance improvement of the vehicle engine, power train and many components. It was evaluated at given mode (LA-4, FTP-75, etc) on an engine dynamometer or computer simulation program. In this paper, the fuel economy improvement cruise control algorithms as controling a vehicle velocity by road load calculated and predicted in a real expressway with gradient was studied. Firstly, the altitude and distance data which was measured with GPS sensor was already installed in the ECU of a vehicle. Then the vehicle equipped with GPS receiver is driven the same expressway. The ECU calculates the gradient angle and the in-/decreasing velocity using the gradient angle by comparing the current received distance and altitude data from GPS with the saved data ahead of the vehicle. Therefore the ECU can calculate and predict the vehicle velocity considering tolerance velocity of next position with running. Then the ECU controls the vehicle velocity to meet this predicted velocity in all section. Three cruise control algorithms with the different velocity profiles for the improvement of fuel economy are proposed and compared with the computer simulation results that the vehicle runs on Youngdong expressway. The proposed CVELCONT2 and CVELCONT3 algorithms were improved 3.7% and 4.8% of fuel economy compared with CONSTVEL which is steady cruising algorithm. These two algorithms are recommended as the Eco-cruise drive methodologies in this paper.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권11호
• /
• pp.1529-1539
• /
• 2017

Objective: The objective of this study was to compare the DNA methylation profile in the longissimus dorsi muscle between Small Tailed Han and Dorper${\times}$Small Tailed Han crossbred sheep which were known to exhibit significant difference in meat-production. Methods: Six samples (three in each group) were subjected to the methylated DNA immunoprecipitation sequencing (MeDIP-seq) and subsequent bioinformatics analyses to detect differentially methylated regions (DMRs) between the two groups. Results: 23.08 Gb clean data from six samples were generated and 808 DMRs were identified in gene body or their neighboring up/downstream regions. Compared with Small Tailed Han sheep, we observed a tendency toward a global loss of DNA methylation in these DMRs in the crossbred group. Gene ontology enrichment analysis found several gene sets which were hypomethylated in gene-body region, including nucleoside binding, motor activity, phospholipid binding and cell junction. Numerous genes were found to be differentially methylated between the two groups with several genes significantly differentially methylated, including transforming growth factor beta 3 (TGFB3), acyl-CoA synthetase long chain family member 1 (ACSL1), ryanodine receptor 1 (RYR1), acyl-CoA oxidase 2 (ACOX2), peroxisome proliferator activated receptor-gamma2 (PPARG2), netrin 1 (NTN1), ras and rab interactor 2 (RIN2), microtubule associated protein RP/EB family member 1 (MAPRE1), ADAM metallopeptidase with thrombospondin type 1 motif 2 (ADAMTS2), myomesin 1 (MYOM1), zinc finger, DHHC type containing 13 (ZDHHC13), and SH3 and PX domains 2B (SH3PXD2B). The real-time quantitative polymerase chain reaction validation showed that the 12 genes are differentially expressed between the two groups. Conclusion: In the current study, a tendency to a global loss of DNA methylation in these DMRs in the crossbred group was found. Twelve genes, TGFB3, ACSL1, RYR1, ACOX2, PPARG2, NTN1, RIN2, MAPRE1, ADAMTS2, MYOM1, ZDHHC13, and SH3PXD2B, were found to be differentially methylated between the two groups by gene ontology enrichment analysis. There are differences in the expression of 12 genes, of which ACSL1, RIN2, and ADAMTS2 have a negative correlation with methylation levels and the data suggest that DNA methylation levels in DMRs of the 3 genes may have an influence on the expression. These results will serve as a valuable resource for DNA methylation investigations on screening candidate genes which might be related to meat production in sheep.