• Journal of Electrical Engineering and Technology
• /
• 제9권3호
• /
• pp.942-949
• /
• 2014

We studied about the rotor design change using a Ferrite ring magnet to reduce material cost in the condition of the same stator core design. However, this design direction has many weak points such as the decrease of BEMF, the low maximum output, the irreversible demagnetization characteristics of a permanent magnet and so on. In order to mitigate such disadvantages, an optimization design of the BLDC motor has been developed by changing each design parameter and by improving the electromagnetic structure. In the proposed water pump SPM BLDC motor using Ferrite magnet, the outer and inner diameter of stator is fixed to the value of the conventional IPM BLDC motor using Nd-Fe-B magnet. The design specification requirements should be satisfied with the same output power and efficiency characteristics in the same dimension. As a result of this study, the design comparison results considering driving performances and material cost are represented. Through the actual experiment with the prototype of the designed motor, the simulations results are verified.

• 전기학회논문지
• /
• 제66권12호
• /
• pp.1721-1724
• /
• 2017

This paper presents a numerical optimization technique to reduce input current and torque ripple of the low voltage BLDC motor using core, coil and switching angle optimization. The optimization technique is employed using the generalized response surface method(RSM) and sampling minimization technique with FEM. A 50W 24V BLDC motor is used to verify the proposed algorithm. As optimizing results, the input current is reduced from 2.46 to 2.11[A], and the input power is reduced from 59 [W] to 51 [W] at the speed of 1000 [rpm]. Also, applied the same optimization algorithm, the torque ripple is reduced about 7.4 %. It is confirmed that the proposed technique is a reasonably useful tool to reduce the consuming current and torque ripple of the low voltage BLDC motor for a compact and efficient design.

• 전기학회논문지
• /
• 제60권4호
• /
• pp.759-765
• /
• 2011

This paper proposes an effective assistant model for considering the stator slot-opening effect on air gap flux density distribution in conventional interior-type permanent magnet (IPM) motor. Different from the conventional slot-opening effect analysis in surface-type PM (SPM) motor, a composite effect of slot-opening uniquely existing in IPM motor, which additionally causes enhancement of air gap flux density due to magnet flux path distortion in iron core between the buried PM and rotor surface. This phenomenon is represented by a proposed assistant model, which simply deals with this additional effect by modifying magnetic pole-arc using an effective method. The validity of this proposed analytical model is applied to predict the air gap flux density distribution in an IPM motor model and confirmed by finite element method (FEM).

• The Journal of Korean Physical Therapy
• /
• 제31권2호
• /
• pp.103-110
• /
• 2019

Purpose: This study evaluated the usefulness of International Classification of Functioning, disability and health core set for children and youths with cerebral palsy (ICF-core set for CP) by comparing the Gross Motor Function Measure-88 (GMFM-88), which is the most widely used outcome measure in children with cerebral palsy (ICF-core set for CP). Method: One subject (Female, 14) was evaluated by GMFM-88 and ICF-core set for CP. In addition, the concept of GMFM-88 was compared with the concept of the ICF-core set for CP in compliance with ICF linking rules. The numerical values both of the GMFM-88 categories and the ICF-core set for CP's items were compared. Results: The ICF b760 was linked to the GMFM-88 59~61. d415 was linked to 57~58 of GMFM-88. d450 was linked to GMFM-88's 65~72. d455 was linked to GMFM-88 at 77and 80~83. Conclusion: The association of the ICF-core set for CP and GMFM-88 was confirmed. In addition, the number of categories of ICF-core set for CP was smaller than the number of items of GMFM-88. In conclusion, the ICF-core set for CP is an evaluation tool that can identify the various features of children. In addition, GMFM-88 was linked to the ICF core set for CP according to the ICF linking rules.

• 한국자동차공학회논문집
• /
• 제21권1호
• /
• pp.36-42
• /
• 2013

Recently, the automobile of the future will be able to substitute an electric vehicle for an internal combustion engine, so the following research is actively in the process of advancing. A traction motor is one of the core parts which compose the electric vehicle. Especially, it is difficult to connect cooling water piping to an in-wheel motor because the in-wheel motor is located within the wheel structure. This structure has disadvantage for closed type and air cooling, so the cooling design of motor housing and internal in-wheel motor is important. In this study, thermo-flow analysis of the in-wheel motor for vehicles was performed in consideration of ram air effect. In order to improve cooling efficiency of the motor, we variously changed geometries of housing and internal shape. As a result, we found that the cooling efficiency was most excellent, in case the cooling groove direction was same with air flow direction and arranged densely. Furthermore, we investigated the cooling performance enhancement with respect to variable geometries of internal in-wheel motor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.55-57
• /
• 2009

This paper deals with an improved core loss calculation under the load conditions, namely, no-load, AC-load and DC-load of multi-pole PM generator from curve fitting method using modified Steinmetz equation considered anomalous loss. For an accurate calculation, magnetic field analyses in stator core considering the time harmonics are performed. And using the nonlinear finite element analysis (FEA), we applied separated rotating and alternating magnetic field to core loss calculation. In order to verify the core loss results by proposed method, the experimental system for no-load core loss measurement has been implemented with DC motor, power analyzer and manufactured PM generator. And, the analysis results with rotational speed agree extremely well with those obtained by measurement.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.264-267
• /
• 2005

Soft magnetic iron powders have been coated with polyester or phenol resin. And the coated powder (soft magnetic composite) have been pressed into ring type core over the pressure of 870 MPa. Green density, magnetic flux density, permeability, core loss of the samples were measured to look at the effect of the coating materials and the amount of them. Green density is increased with the amount of coating materials and shows the maximum value, 6.5 $g/cm^3$ at 5 w/o, but decreased over it. And lowest value of the core loss is showed for the 5 w/o coated samples.

• 전자공학회논문지SC
• /
• 제39권2호
• /
• pp.104-115
• /
• 2002

인덕터 전기 부품을 구성하는 핵심 부품인 링-코어를 물질 특성, 인덕턴스 값 및 Q-값에 따라 10등급으로 분류하는 선별기를 설계하는 데 있어, 한번에 10개의 코어를 동시에 자동 분류할 수 있도록 설계한다. 동시에 10개의 코어를 자동 선별하려면 10개의 측정 장비가 필요한데, 이러한 측정 장비는 대단히 고가이므로, 하나의 측정 장비를 사용하여 10개의 링-코어를 검사한 후, 각각의 등급에 따라서 해당 그릇으로 저장하도록 한다. 이러한 시스템을 개발하는 데 있어서, 초당 0.5개의 생산 속도보다 빠른 속도인 초당 1개 정도로 측정 분류할 수 있는 속도가 필요하다. 시스템의 구성물은 먼저 작업 명령을 내려주고, 각종 생산 및 품질 통계를 관리하는 작업 PC와, 100개의 고무호스, 공급기, 측정기, 10개의 등급-상자, 1개의 메인-보드, 10개의 모터-제어-보드, 10개의 모터-드라이버-보드, 10개의 스텝-모터 등으로 구성되어 있다. 따라서 많은 고장, 오동작이 예상된다. 가장 중요한 사항은 일부의 모터 고장, 일부 모터 드라이버 보드 고장, 일부 모터 제어 보드 등의 고장이 발생하여도 작동이 멈추지 않도록 설계하는 것이다. 이를 위하여 센서 회로 추가 및 관련 소프트웨어 알고리즘을 개발한다.

• 한국산학기술학회논문지
• /
• 제11권2호
• /
• pp.455-460
• /
• 2010

고효율 유도전동기는 일반 유도전동기의 발생 손실을 절감시킨 것으로 적은 소비전력으로 에너지를 절약하고, 운전비용이 낮아서 단기간에 초기 설비투자 비용회수가 가능하고, 온도상승이 크지 않아 전동기 수명을 연장시킬 수 있다. 이에 포스코아에서는 이제까지의 경험을 바탕으로 전기 연구원과 협력하여 고효율 유도전동기 개발에 나섰다. 본 논문에서는 고효율 유도전동기 소형모터금형개발에 관하여 연구하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.918-919
• /
• 2015

Because of environmental regulations in emissions control area, the demand for ships to use LNG as fuel is increasing. Orders for domestic shipbuilders to produce LNG carriers are steadily increasing. However, major appliances such as spray pump, main cargo pump and others have been relied on imports. Therefore, development of pump motor using at cryogenic temperature is necessary. Operating temperature of an induction motor is at $-163^{\circ}C$. At this low temperature, the resistivity of a motor coil is quite different from normal ones, and so does the torque characteristics of motor. This paper presents a designing method of a cryogenic induction motor for LNG pump. The variation of resistivity of motor coil is considered in the design process. The heat source such as core-loss, hysteresis-loss and copper-loss are analyzed to prevent the LNG evaporation which may cause the motor failure.