• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1425-1429
• /
• 2007

Consumer's product selection measures are being shifted from the units' operational performance to overall performance. Low noise, low vibration, and low power consumption rate, etc. which used to be additional quality indices, now become vital performance factors. Especially, noise and vibration characteristics are being considered as equivalent to/or even more critical than operational performance in certain products such as office machines and home entertainment systems, which share the same space with human being's daily life. Therefore, noise reduction and sound quality improvement technology becomes an inevitable design issue for those applications. Qualitative noise characteristics of rotating polygonal disk applied to digital printer systems are presented. Overall sound pressure level change and tonal noise variation with respect to the geometrical properties of polygonal disk, operational speed, and others are briefly discussed based on experimental results.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 춘계학술대회 논문집
• /
• pp.107-112
• /
• 1997

In this study of made Autmation system is moving linear transfer system for mainly forming of small electronic unit and other at press line. This system for loading and unloading a workpiece has been installed in a press in order to load and unload a workpiece from a press die. Main Control method be used PLC. It took data of input from each sensor and send signal of output to actuator by sequence program also, we try to Characteristics test of this system has good condition when operating with raser measurmant.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.59-61
• /
• 2006

The single phase switched reluctance motor(SRM) is simpler in control circuit because the number of switching devices is fewer than the poly phase SRM. The energy density per unit volume is very big because all stator poles are excited simultaneously by a single switching power source. But it must be provided a starting device on account of not being generated the starting torque at specific rotor positions. And also it has some demerits that have a torque ripple, noise and vibration because of being excited by switching pulse power source. Therefore, to make up for these demerits, it is realized many studies for the structure design used by computer and the operating methods by power electronics technique. In this paper, we'll present the comparison of the single phase SRM with the various rotor pole face types, as like stepped rotor pole face type and general rotor pole face type. For the torque characteristics analysis.

• 대한산업공학회지
• /
• 제19권3호
• /
• pp.103-111
• /
• 1993

There are four flexor muscles at elbow-biceps brachii, brachialis, brachioradialis, pronator teres. Muscle exertion force depends on the following conditions : elbow angle, external workload, and endurance time. The objectives of this study are to investigate the variations of the recruitment patterns of four muscles, and to analyze the changes of the role assigned to each muscle during elbow flexion. For three elbow angles, the transition point of type F motor unit of each muscle is inferred and the changes of the role assigned due to exertion level are identified by electromyographic analysis. The results showed that the recruitment pattern of biceps brachii is constant but those of other muscles are varied depending on elbow angle and exertion level. An EMG multiplexor is developed and simultaneous measurement of electromyographic signals of four elbow flexors is possible.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.467-468
• /
• 2011

본 논문에서는 다축의 모터 동력을 필요로 하는 전기자동차에 있어서 각 모터를 구동시키기 위한 모터제어기를 개발하고자 한다. 20kW급 IPMSM 모터를 구동하기 위해서 32비트 고성능 DSP 프로세서로 벡터제어 알고리즘을 적용하고, 모터의 회전 정보와 위치 정보를 얻기 위하여 레졸버 위치센서를 적용하였으며, 냉각성능을 높이기 위하여 수냉식으로 IGBT를 직접 냉각시켜 방열하는 구조로 설계하였다. 제안된 제어기의 특성을 얻기 위하여 MATLAB 시뮬레이션을 수행하였고, 시제품을 제작하여 유용성을 검증하였다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2009년도 추계학술발표논문집
• /
• pp.279-282
• /
• 2009

Motohawk ECU(Engine Control Unit)에 의한 가솔린기관의 연료분사제어 알고리즘 연구를 통하여 연비를 절감할 수 있는 방안을 연구한다. 실제 차량엔진 ECU는 캘리브레이션 이외의 제어 알고리즘을 변경하여 구현하기가 쉽지 않으므로 상기의 프로토타입 ECU를 활용하여 연료분사제어 로직을 변경해가면서 연료분사와 관련된 여러가지 파라메터의 연구가 가능하다. 또한 프로그래밍은 Matlab과 Simulink로 구현할 수 있어서 최적연비를 얻기 위한 로직의 구현을 실시간으로 할 수 있으며 차량의 특성상 프로그램의 임베딩이 가능하여야 하므로 이러한 목적에 프로토타입 ECU에 의한 로직개발은 많은 장점이 있다. 이러한 ECU를 활용하여 여러 가지 제어 변수에 의한 최적화된 연료분사 로직의 설계 및 미치는 영향을 평가한다.

• 경영과학
• /
• 제34권1호
• /
• pp.1-13
• /
• 2017

The percentage of 3PL (Third-party Logistics), which uses third party businesses to outsource elements of the company's distribution and fulfillment services, is increasing steadily. To provide 3PL service to the customers, it is needed to estimate the total transportation cost and propose the unit cost to the customers. In this paper, we develop a decision support system for estimation of transportation cost of 3PL provider considering various transportation services, such as direct transportation, multi point visiting transportation, and cross docking. The system supports route planning of vehicles by using algorithms based on tabu search and dynamic programming.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.702_703
• /
• 2009

Electric Power Steering(EPS) system is superior to conventional Hydraulic Power Steering(HPS) system in aspect of fuel economy and environmental concerns. The EPS system consists of torque sensor, electric motor, ECU(Electric Control Unit), gears and etc. Among the elements, the torque sensor is one of the core technologies of which output signal is used for main input of EPS controller. Usually, the torque sensor has used torsion bar to transform torsion angle into torque. The torsion angle of both ends of a torsion bar is measured by a contact variable resistor. In this paper, the sensor is accurately analyzed using 3D finite element method and its characteristics with respect to four different shapes of the stator teeth are compared. The four shapes are rectangular, triangular, trapezoidal and circular type.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.440-443
• /
• 2004

As a main management unit of MSC, PMU controls the MSC payload operation by issuing commands to other subunit and PMU internal modules. One of these main control functions is to drive the APS(Antenna Pointing System) when APS motion is required. For this purpose, SBC(Single Board Computer) for calculating motor commands and APDE for driving APM(Antenna Pointing Mechanism) by PWM signal operate inside PUM. In this paper, details on APDE design shall be described such as electronic board architecture, primary and redundant design concept, Cross-Strap, FPGA contents and latch-up immune concept, etc., which shall show good practices of electronic board design for space program.

• 동굴
• /
• 제81호
• /
• pp.35-41
• /
• 2007

According as the industry develops recently, the import and export freight amount is increasing sharply, but physical distribution processing equipment ability had achieved conveyance, surge and setup of physical distribution by human's labor ability. But, inefficiency is indicated in operation of product line and warehouse or physical distribution storage equipment because is ceilinged the processing physical distribution amount and the efficiency in physical distribution processing by these labor ability.