• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.868-870
• /
• 2001

Salient pole rotor type single phase SRM(switched reluctance motor) can be use axial direction magnetic flux and radial direction magnetic flux at the same time. Then, it has higher energy density per unit volume and can be lessened the shaft length of motor or exciting magnetic force. Additionally, it's durability is good because it is simple structure and driving device. Prototype of Salient pole rotor type single phase SRM was fabricated by using parameters of three phase SRM and 3D FEM analysis. Also, driving device was fabricated for prototype. Speed and torque characteristic was confirmed through the experiments, and flux linkage, which is important parameter of SRM for generating torque, was measured. The induction emf was calculated by using ideal inductance graph and current graph. Calculated emf and measured emf was compared for confirming loss of prototype in this paper.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 추계학술대회 논문집
• /
• pp.201-202
• /
• 2012

This paper presents design and implementation of the PCU(150 kVA 3-Phase PWM Inverter for Electric Vehicles). For Implementation of the PCU, it is consist with Case, Connectors, IGBT module for PWM switching, DC-capacitor for dc-source, resolver for sensing of speed & position, and PCB board for control & gate-driver. Also, for the purpose of stable operation of the PCU in vehicle with variable torque condition in motor, current control scheme based on torque-map are developed. According to real-car test mode, the prototype of proposed the PCU is verified with performance and stability. Thus, design and implement of the PCU are discussed, and experimental results are presented in this paper.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.821-824
• /
• 2005

This paper presents a technique to evaluate torque and speed characteristics of induction motor with the Dynamometer. The simple Dynamometer controlled via microcontroller and displayed by computer. The Microcontroller generates the PWM (Pulse Width Modulation) signal and control the duty cycle of signal for control braking level. The Buck converter is a braking unit which uses IGBT as switch in circuit. The output current of the Buck converter and output voltage of tacho generator are converted to digital signals and analyzed by microcontroller. The signals are then sent to computer for displaying torque and speed responds independent on the braking time. The test results of the Dynamometer in this research can coreectly predict the torque and speed response under reasonable tests. Moreover, this Dynamometer is easy and inexpensive to make.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1366-1370
• /
• 2005

As the development of microprocessor technology, electric power steering (EPS) system which uses an electric motor came to use a few years ago. It can solve the problems associated with hydraulic power steering. The motor only operates when steering assistance is needed, so it can save fuel and can reduce weight and cost by eliminating hydraulic pump and piping. As one of performance criteria of EPS systems, the transmissibility from road wheel load to steering wheel torque is considered in the paper. The transmissibility can be studied by fixing the steering wheel and calculating the torque needed to hold the steering wheel from road wheel load. A proportion-plus-derivative control is needed for EPS systems to generate desired static torque boost and avoid transmissibility of fluctuation. A pure proportion control can't satisfy both requirements.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.247-252
• /
• 2001

In this study, an aluminum electric motor car with a modular front end made of composite materials is numerically evaluated applying the standard specifications for the urban EMU(Electric Multiple Unit) train. Structural analyses under compressive load, torsional load and free vibration satisfy the standard specifications, but analysis under normal load doesn't. By the way, the aluminum bodyshell of the car except the modular front end is almost same to that of the Korean standard EMU, which satisfy the standard specifications. It is presumed that the stiffness of the modular front end made of composite materials haves some influence on the strength of the aluminum bodyshell.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1250-1252
• /
• 2007

Recently, a large amount of waste has been occurred from electric motor units (EMUs) due to the excess of their duration or the exchange of interior. In Korea, most of waste has been treated by incineration or landfill because the special treatment system of disused EMUs has not been existed until now. The objective of this study is to investigate the international railroad cases for the efficient treatment of disused EMUs. Japanese railroad makes an effort to enhance the recycling efficiency of rolling stocks such as the use of recycling materials or the development of recycling technology. Also, Europe has decided to treat the disused rolling stocks considering the inspection of their conditions and the increase of management cost. Therefore, in the future, it will be necessary to improve the domestic regulations related to the duration of rolling stocks and to develop the recycling technology of interior preferentially.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1-5
• /
• 2007

An electric motor unit (EMU) is manufactured from a large number of components and parts which are made of extensive raw materials. In emits much environmental load throughout its entire life cycle, having both complicated and elaborated system and long period of life time. Therefore, it is necessary to investigate the methodologies and tools to analyze the environmental performance of EMUs throughout their life cycle. RACE (Rail Assessment for Clean Environment) developed in this study is the software that can analyze the environmental impacts and eco-efficiency of EMUs, which are new concepts proposed for sustainable development. It has database for main components as well as principal materials contained in EMUs. Manufacturers and operators can use it to assess the life-cycle environmental impacts of EMU and support their decision making. RACE can also be used as a tool for environmental communication between manufacturers and operators.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.19-21
• /
• 2007

In recent, a great number of electric motor units (EMUs) have been disused in Korea according as its legal duration is 25 years. Generally, the disused EMUs are disposed by selling original form or scrapping for junk. Until now, any efficient disposal system for disused EMUs has not existed. The purpose of this study was to develop the recycling process for the FRP used as an interior panel of EMU. This process was to manufacture a product mixing binders, fillers and the powdered FRP. The characteristics of a product were changed with the mixing ratio of the powdered FRP. The optimal ratio of the powdered FRP was from 10 % to 15 % (w/w). In the future, the application of this process can enhance the efficiency of resource recycling and decrease the cost of waste treatment in the EMU industry.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권3호
• /
• pp.252-255
• /
• 2014

In the case of long-stator linear drives, unlike rotative drives for which speed or position sensors are a single unit attached to the shaft, these sensors extend along the guideway. The position signal transmitted from maglev vehicle can't meet the need of the real-time propulsion control. In this paper the position estimator for propulsion inverter driving long stator linear synchronous motor (LSLSM) in high speed maglev train is proposed. In order to get the higher resolution of the position information transmitted from vehicle, Full order state observer is proposed for position estimator.

• 대한기계학회논문집A
• /
• 제25권7호
• /
• pp.1039-1046
• /
• 2001

Among the automotive steering systems, an Electric Power Assisted steering (EPAS) system utilizes an electronically controlled electric motor to provide steering assistance to the driver. The key components of the EPAS system are torque sensor, ECU (Electronic Control Unit), and DC Motor. The most important component of the EPAS is the torque sensor. The conventional torque sensor has complicated mechanical mechanism of torque detection. However, we suggest a non-contact torque sensor for EPAS using Maluss polarization law. It was found that the sensor exhibited not only excellent linearity but also superior characteristics of hysteresis, temperature and vibration.