• 재활복지공학회논문지
• /
• 제3권1호
• /
• pp.1-6
• /
• 2009

본 조사는 휠체어를 사용하는 장애인이 차량을 탑승할 때 휠체어 수납에 대한 불편함을 파악하여, 향후 관련 제품 개발에 개념설계를 하고자 실시하였다. 연구는 수동휠체어를 사용하고 있으며, 자가 운전을 할 수 있는 장애인 50명을 대상으로 직접 면담하는 설문조사 방식으로 실시하였다. 그 결과 설문에 참여한 88%의 장애인이 차량에 휠체어를 수납할 수 있는 보조 장치의 개발이 필요하다고 응답하였다. 이러한 장치로써 차량 트렁크에서 로봇팔이 차량의 운전석 문까지 나와서 휠체어를 트렁크에 수납하는 방법을 가장 선호하였다.

• 한국항해항만학회지
• /
• 제29권1호
• /
• pp.77-82
• /
• 2005

컨테이너 무역 규모가 매년 증가함에 따라 항만 환경이 급격히 변화하고 있다. 이러한 항만의 변화에 성공적으로 대처하기 위해 차세대 항만하역시스템인 LMTT(Linear Motor-based Transfer Technology)의 연구가 진행되고 있다. LMTT용 셔틀 카의 프레임부는 내부 빔, 내부 빔, 크로스 빔으로 구성되어 있으며, 본 연구에서는 프레임을 설계하기 위하여 크로스 빔의 개수, 하중 재하 위치 및 내부 빔의 위치에 따른 외부 빔과의 거리비 등이 프레임의 강도 및 강성에 미치는 영향을 유한요소 해석을 통하여 하중이 외부 빔과 내부 빔에 동시에 작용하고 크로스 빔이 5개일 때가 최적의 조건이라는 결론을 얻을 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.392-395
• /
• 2003

In the maritime container terminal, LMTT (Linear Motor-based Transfer Technology) is horizontal transfer system for the yard automation, which has been proposed to take the place of AGV (Automated Guided Vehicle). The system is based on PMLSM (Permanent Magnetic Linear Synchronous Motor) that is consists of stator modules on the rail and shuttle car (mover). Because of large variant of mover's weight by loading and unloading containers, the difference of each characteristic of stator modules, and a stator module's trouble etc., LMCPS (Linear Motor Conveyance Positioning System) is considered as that the system is changed its model suddenly and variously. In this paper, we will introduce the soft-computing method of a multi-step prediction control for LMCPS using DR-FNN (Dynamically-constructed Recurrent Fuzzy Neural Network). The proposed control system is used two networks for multi-step prediction. Consequently, the system has an ability to adapt for external disturbance, cogging force, force ripple, and sudden changes of itself.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.307-310
• /
• 2003

In the maritime container terminal, LMTT(Linear Motor-based Transfer Technology) is horizontal transfer system for the yard automation, which has been proposed to take the place of AGV(Automated Guided Vehicle). The system is based on PMLSM (Permanent Magnetic Linear Synchronous Motor) that is consists of stator modules on the rail and shuttle car (mover). Because of large variant of mover's weight by loading and unloading containers, the difference of each characteristic of stator modules, and a stator module's trouble etc., LMCPS (Linear Motor Conveyance Positioning System) is considered as that the system is changed its model suddenly and variously. In this paper, we will introduce the soft-computing method of a multi-step prediction control for LMCPS using DR-FNN (Dynamically-constructed Recurrent Fuzzy Neural Network). The proposed control system is used two networks for multi-step prediction. Consequently, the system has an ability to adapt for external disturbance, cogging force, force ripple, and sudden changes of itself.

• 한국인터넷방송통신학회논문지
• /
• 제18권1호
• /
• pp.167-171
• /
• 2018

현재 수없이 많은 가전제품이나 IT 부품 등에서 저전력 DC모터를 적용시켜서 회전력을 가해야 하는 곳에는, 어느 때나 어느 곳에서나 적응적인 적용이 가능한 기술이 필요함으로써, 비안정 멀티바이브레이터를 이용한 저전력 아이디어 제품을 실험적으로 개발하였다. 모터구동이 일반적으로 초기 구동시에 많은 전력을 소모하며, 정상 동작시에 저전력 동작을 이루어내는 구동원리를 이용하여, 전원 자체를 펄스 형태로 공급하여 저전력 동작을 구현하여. AC모터이든지 DC모터이든지 어느 것이든지 적용 가능한 기술실험 동작 결과를 증명하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.143-146
• /
• 1999

A method to control the speed of DC motor with one-chip microprocessor PIC using PWM is discussed in this paper. This thesis deals with the DC motor speed control for electric bicycles which may be used as an alternative means of transformation in the future. We tried to design a stable system for controlling the speed of DC motor and materialized an electric bicycle loading this system. Now we are on the way to find out the problems this system has and work out the solutions.

• 조명전기설비학회논문지
• /
• 제28권4호
• /
• pp.80-87
• /
• 2014

This paper suggests the dual-gap for generating power and increasing the torque of a direct-drive permanent magnet synchronous motor in a hybrid-cycle. To consider easy coil winding, we applied a structure of dual-gap for the permanent magnet synchronous motor (PMSM). Because the torque of PMSM with the dual-gap is very large, we are designed the appropriate specifications of the PMSM by selected the appropriate dual-gap slot and poles combination. The prototype model is selected by design theory for increasing torque and maximizing output power of PMSM. And the detailed structure design of the model was designed by the loading distribution method. The PMSM models were analyzed by finite element method. Finally, we have suggested appropriate rotor structure has benefit to further increasing torque and prevent decreasing of the output power in PMSM with dual-gap.

• 한국대기환경학회지
• /
• 제26권4호
• /
• pp.392-402
• /
• 2010

Black carbon (BC) concentrations were measured with an aethalometer (AE-16, 880 nm) at time interval of 5-min at an urban site of Gwangju over a year 2008. 24-hr filter-based integrated measurements of $PM_{2.5}$ particles were also made at the same site during the winter and summer intensive periods to test any optical loading bias in the raw BC data measured by aethalometer. BC concentration was higher in winter than in summer, possibly due to increase in emissions from energy consumption and poor dispersion with reduction of boundary layer in winter. Also temporal cycles of BC indicate that short-term transient spikes were common, occurring primarily during the rush-hour periods. A similar feature was also observed in diurnal concentration cycle of CO, mainly emitted from motor vehicles. When both low wind speed and weather patterns such as mist, haze and etc were combined, high BC concentrations frequently occurred. The amount of optical loading effect described by the "k" factor showed the seasonal variation, ranging from 0.0003 to 0.0036. This implies that optical loading effect is not seen at all times. From the comparison between the filter-based elemental carbon (EC) and aethalometer BC data, it was found that the loading compensated BC values were more reasonable than the raw BC ones reported from the aethalometer.

• 비파괴검사학회지
• /
• 제26권5호
• /
• pp.343-352
• /
• 2006

본 논문에서는 금속 연소관, 단열 고무 그리고 내열 복합재로 구성된 연소관 조립체의 접착 체결 상태를 확인하기 위해 변형률, 음향방출 신호 그리고 초음파 시험자료를 이용한 비파괴 시험 방법이 제시되었다. 또한 내압 상태에서 연소관 조립체의 각 계면 접착 상태를 정량적으로 평가하기 위해 유한요소 해석이 수행되었다. 공압 시험 중 계측한 변형률 값과 음향방출 신호 상관관계 연구를 통해 연소관 조립체의 접착 건전성 평가가 가능했다. 그리고 연소관 조립체의 여러 접착 계면 중 첫 번째 계면인 연소관과 고무간의 접착은 초음파 방법으로 분류하였다. 이러한 연구를 통해 연소관 조립체의 모든 접착 계면은 1) 초기 완전 미접착, 2) 공압 시험 중 완전 접착 분리, 3) 공압 시험 중 부분 접착 분리, 4) 완전 접착 등 4가지 형태로 분류 및 검출되었다.

• 드라이브 ㆍ 컨트롤
• /
• 제17권3호
• /
• pp.26-32
• /
• 2020

In modern society, the energy-saving problem of industrial vehicles is economically and environmentally critical. Energy savings using the potential energy of forklifts are one of the viable solutions to resolving this problem. The basic concept of this study is to operate the hydraulic motor and recharge the battery using the flow rate from the cylinder when loading heavy objects and lowering the fork. To save energy, the torque and rotational speed of the generator should be optimized according to the load and descent speed to increase efficiency. To this end, we propose a system that optimizes energy saving efficiency by controlling the swashplate angle of the variable hydraulic motor through the GA(Genetic-Algorithm). The results were verified by building and comparing fixed motor models and variable motor models using the AMEsim. The results of the study show that the proposed optimized swashplate angle increases the energy saving efficiency by approximately 6%-8%, depending on the working conditions.