• 전력전자학회논문지
• /
• 제3권1호
• /
• pp.1-7
• /
• 1998

발전설비의 대형화로 인하여 전력절감 문제가 크게 대두되었고, 팬이나 펌프를 부하 변화에 따라 속도제어하므로써 전기 에너지를 절약 할 수 있다. 1MVA급 단위 인버터 2대를 병렬 운전하여 대용량 2MVA GTO 인버터를 구현하였으며, 단위 인버터의 병렬 운전은 2대의 출력변압기 2차측 결선을 직렬 연결하여 구현하였다. 개발된 시스템은 제어반, 정류기반, 2대의 인버터반으로 구성되어 있으며, 이 시스템은 한국전력공사 성인천복합화력발전처 해수펌프 구동 유도전동기(6.6KV 1500KW)에 적용되어 전력절감에 기여하고 있다. 또 단위 인버터가 상호 180$^{\circ}$위상차를 갖도록 병렬 운전하므로써 고조파 성분을 저감시키면서 대용량을 구현하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.453-456
• /
• 2001

The thrust control characteristics of single-sided linear induction motor (SLIM) is achieved using PI controller in this paper. The trembling of air gap length between the primary winding and the secondary structure of the SLIM must be minimized in order to get quick response results. Also, the input voltage of SLIM is involved with the time harmonics because most SLIM is driven by inverter. According to the feedback linear control system, this paper describes with applying the non-linear control, speed and estimated flux algorithm. At the result of this experiment, we reached to the improvement of thrust characteristics with PI controller.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.417-420
• /
• 2000

In order to the torque control the indirect flux control was performed by controlling the ratio of e/f and the q-axis flux was estimated by the slip command and q-axis flux was estimated by the slip command and q-axis current in the rotor circuits. Also the frequency was controlled to keep on the q-axis flux to be zero and the constant torque characteristics could be obtained by generation the preset torque. In the induction motor driven by the boltage source inverter with the constant voltage and frequency the speed variation is expressed as a slip So the speed control can be achieved by slip compensation The slip was calculated with a q-flux current filtered by first-order filter and as the result the error problem which may occur in current detection was eliminated

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 제2회 학술대회 논문집 일렉트렛트 및 응용기술전문연구회
• /
• pp.21-24
• /
• 2000

Traction motors driven by several type inverters have been subjected to increasing demands for higher operating temperature, more demands for duty cycles, higher starting current, frequent voltage transients and finally severe environmental exposure. For applications to inverter duty, traction motors needs a special insulation system, which has characteristics of increased bond strength, lower operating temperature and higher turn-to-tum insulation. Also it needs major contributors to insulation life and reliability of motors, which more considered by temperature, voltage, frequency, rise time, pulse configuration, wire thickness and insulation materials. In this paper, to evaluate of reliability and expected life, it is analyzed the several stresses and their degradation mechanism on insulation system of AC traction motor.

• Journal of Power Electronics
• /
• 제11권1호
• /
• pp.45-50
• /
• 2011

This paper proposes a method for comparing and evaluating anti-windup proportional-integral (PI) control strategies. The so-called PI plane is used and its coordinate is composed of the error and the integral state. In addition, an anti-windup PI controller with integral state prediction is proposed. The anti-windup scheme can be easily analyzed and evaluated on the PI plane in detail. Representative anti-windup methods are experimentally applied to the speed control of a vector-controlled induction motor driven by a pulse width modulated (PWM) voltage-source inverter (VSI). The experimental results compare the anti-windup PI controllers. It is empathized that the initial value of the integral state at the beginning of the linear range dominates the control performance in terms of overshoot and settling time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.41-43
• /
• 1997

This paper represents the comparison of harmonic loss characteristics of the inverter-driven 3-phase squirrel cage induction motor with slit and U-iron bridge slots of rotor. Two-dimensional time-stepped finite element method is used for electromagenetic field analysis. And spectrums of bar current, phase current, and torque are compared in each case.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1371-1373
• /
• 2000

In this paper, the complex accelerating degradation of traction motor driven with VVVF controlled inverter were performed on the form coil samples with the 200 Class insulation system. in order to evaluate the reliability and the long-term life. After aging, the dielectric and PD properties were investigated on the 10 cycles aging sample in the range of $20{\sim}160[^{\circ}C]$ and AC $250{\sim}2250[V]$ to diagnosis the condition of end-life and find the dominative factors of degradation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.158-161
• /
• 2005

For low power motor control, there are increasing demands for compactness, cost effective and built in many functions. Hence Intelligent Power Module(IPM) is considered as an important technology in inverter-driven motor applications. Regarding BID-IPM(Built In DC/DC converter, Intelligent Power Module) newly developed to integrate NPT-IGBT, HVIC and Flyback converter in a compact package, this paper discussed design of BID-IPM and presented the experimental results by using signal source board and equivalent load test board.

• Journal of Power Electronics
• /
• 제15권5호
• /
• pp.1264-1273
• /
• 2015

An inverter output power control based power factor correction (PFC) strategy is being extensively used for permanent magnet synchronous motor (PMSM) drives in appliances because such a strategy can considerably reduce the cost and size of the inverter. In this strategy, PFC circuits are removed and large electrolytic DC-link capacitors are replaced with small film capacitors. In this application, the PMSM d-q axes currents are controlled to produce ripples, the frequency of which is twice that of the AC main voltage, to obtain a high power factor at the AC mains. This process indicates that the PMSM operates under periodic magnetic saturation conditions. This paper proposes a back electromotive-force (back-EMF) estimator for the high-speed sensorless control of PMSM operating under periodic magnetic saturation conditions. The transfer function of the back-EMF estimator is analyzed to examine the effect of the periodic magnetic saturation on the accuracy of the estimated rotor position. A simple compensation method for the estimated position errors caused by the periodic magnetic saturation is also proposed in this paper. The effectiveness of the proposed method is experimentally verified with the use of a PMSM drive for a vacuum cleaner centrifugal fan, wherein the maximum operating speed reaches 30,000 rpm.

• 한국철도학회논문집
• /
• 제13권5호
• /
• pp.493-499
• /
• 2010

국내의 차세대 고속전철 분야는 분산형 시스템을 개발 중이며 전동기 속도 제어를 위해서 벡터제어 방식을 사용하고 있다. 오늘날의 철도 차량 구동시스템은 인버터 제어에 의한 유도전동기 방식이 널리 쓰이고 있지만 최근에는 소음 제거, 효율 극대화 및 유지보수 비용 절감 등의 이점이 있는 영구자석 동기전동기가 새로이 관심을 얻고 있다. 본 논문에서는 매입형 영구자석 동기전동기를 적용한 차세대 고속전철 구동시스템의 일정 토크 영역에서의 제어를 수행한다. 적용된 제어 기법은 IPMSM의 릴럭턴스 토크를 이용하기 위한 단위전류 당 최대 토크 제어가 사용되었으며 Matlab/Simulink를 사용 모의시험 프로그램을 개발하여 시험하고 적용된 방식의 효용성을 증명하였다.