• Corrosion Science and Technology
• /
• v.15 no.2
• /
• pp.78-83
• /
• 2016

The e-coating to inhibit induced corrosion can deposit a coating not only on the exterior surface but also on the inside of whole metallic components of body-in-white (BIW). But it is difficult to deposit paint films on the inside area because metallic components are multi layered. It may cause shortness of e-coating thickness. The only way to properly verify e-coating thickness is by performing the use of tear-down prototypes. When paint films' thickness is inadequate, a structural modification on each metallic component is needed. Verification of the thickness improvement for a structural modification requires much manual effort and leads to increasing development time. Recently, the simulation technology has been developed to predict the e-coating thickness in e-coating field. By applying the simulation to BIW, improvement in paint thickness quality and shortening of development period are expected. The paper explains a validated solution that allows simulating the effect of design changes to the e-coating thickness and current density, thereby delivering results within a time frame of a few days.

• Journal of Institute of Control, Robotics and Systems
• /
• v.1 no.2
• /
• pp.94-98
• /
• 1995

This paper proposes an optimal design method for the weight and cost of a moving magnet typer linear DC motor (MM-LDM). The optimal design condition such as type and size of MM-LDM were determined by the trinary search algorithm after adjusting a standard function and its related parameters. In order to verigy results of the optimal design by the computer simulation, the designed values such as a thrust, a current, a velocity, and etc. of the fabricated MM-LDM were measured. And the measurement results are in good agreement with the designed ones.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.945-947
• /
• 2003

Various kinds of practical machines using single phase induction motor(SPIM) are necessary to control speed and torque. In particular, capacitor-run type SPIM has constitutional characteristics, the motor torque is changed by auxiliary capacitance variation. In this study, we manifest equivalent model having more simplicity, and study the relation between torque and capacitance value of SPIM. And analyze Magnetic vibration for FEM(Finite Element Method) simulation. Also, We design the experimental controller which is able to speed control accurately by phase angle control of AC input voltage. Through the simulation and experimental results, we confirmed validity of this study.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1101-1102
• /
• 2011

In this paper, characteristic of switched reluctance motor for bike is compared according to rotor structure. Comparison results is verified with simulation which give same condition for design and control.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.628-631
• /
• 1992

The position control for DC motor under the unpredictable load variations is presented. Neural network controller trained to deal with this problem provide the estimates of system parameters. Pole placement is also performed in accordance with them. The proposed method is validated through computer simulation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.223-225
• /
• 2008

In this study. we propose a wide bandwidth surface acoustic wave (SAW) motor by design of Inter Digital Transducer (IDT). SAW motor has several benefits compared with preexisted actuator. But it has narrow bandwidth, which causes the lower performance. To widen the bandwidth, the change of IDT structure was proposed, which is slanted IDT and since function apodization. The frequency responses were compared original uniform IDT and changed IDT. And the time responses were compared original uniform IDT and changed IDT. As a result, the feasibility of wide bandwidth SAW motor was certified.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.12
• /
• pp.1218-1229
• /
• 1991

The time optimal position control design can be repeatedly taken from the initial state of a dynamic system to a desired one as fast as possible in the industrial drives. In this case, an induction machine parameters will vary due to temperature, frequency, and saturation effects. In particular, the rotor resistance changes critically with temperature and frequency. These changes affect the command values of the stator current components and slip speed. There is a mismatch between the commanded variables and actual ones of the induction motor drive, and this situation leads to coupling of the vector controller from the plant, i.e. the induction motor . Consequences of such a coupling include the initiation of oscillations of the rotor flux and unsuitable switching of electromagnetic torque for the induction motor servo drive. Therefore, this paper describes a rotor resistance parameter compensating method for the induction motor, And the validity of the proposed design method is confirmed by simulation studies and experiment results.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.417-421
• /
• 2001

In this paper, a novel design method of variable motor inetia in Induction motor drive system is proposed. The inertia of a load and a motor are estimated by using RLS (Recursive Least Square) algorithm. The speed controller is designed by Kharitonove theory of motor. The effectiveness of the proposed scheme is verified with simulation and experiments results.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.164-167
• /
• 2005

In this paper, the design and characteristics of a ${\pi}-shaped$ ultrasonic motor which is applicable to optical zoom operation of lenssystem for mobile phone are investigated. Its desi후 and simulation of performances are carried out by FEM (finite element method) commercial software. As a simulation result, by applying voltage with single phase, a combined vibration is produced at the surface of an arm of stator. The prototype of motor is fabricated and its outer size is 8*4*2 $mm^3$ including the cylindrical steel rod of 2 mm in diameter as rotor. The motor exhibits a maximum speed of 500 rpm and a power consumption of 0.3 W when driven at 20 Vpp and 64 kHz.

• Journal of information and communication convergence engineering
• /
• v.3 no.1
• /
• pp.43-48
• /
• 2005

In this paper, the adaptive fuzzy logic controller(AFLC) is proposed, which uses real-coding genetic algorithm showing a good performance on convergence velocity and diversity of population among evolutionary computations. The effectiveness of the proposed AFLC was demonstrated by computer simulation for speed control system of AC servo motor. As a result of simulation for the AC servo motor, it is shown the proposed AFLC has the better performance on overshoot, settling time and rising time than the PI controller which is used when tuning AFLC.