• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.810-813
• /
• 2007

Recently, mobile video communication is getting more and more popular. Visual quality and computational complexity are primary factors affecting performance of video communication. Frame rate up-conversion (FRC) is necessary for achieving high visual quality in mobile projection displays. In this paper, a FRC method using motion compensation based on block matching algorithm (BMA) with adaptive block size is proposed. In order to improve the accuracy of the estimated motion vectors, the motion vector refinement technique is proposed. Experiment results indicate that the proposed technique exhibits better performance with lower hardware complexity compared to the conventional methods.

• 산업경영시스템학회지
• /
• 제25권3호
• /
• pp.28-33
• /
• 2002

Several studies indicated that an independent visual background (IVB) reduced simulator sickness (SS) and balance disturbance associated with exposure to virtual environments (VEs) and motion simulators. A recent study showed that an IVB comprised of an earth-fixed grid was less effective in a complex driving simulator than in a simple VE. Subjects' post-experiment reports indicated that the VE motion "induced" motion of the earth-fixed grid m. This led to the suggestion that an IVB comprised of clouds would be less subject to induced motion and therefore would alleviate nausea more effectively than a grid IVB. Clouds are "natural" and are usually perceived as relatively stable, whereas a grid has no inherent stability. 12 subjects were exposed to complex motion through a simulated environment in a driving simulator under 3 IVB conditions: grid, less clouds, many clouds. They reported less nausea when the many-cloud IVB was used relative to the grid IVB condition. grid IVB condition.

• 제어로봇시스템학회논문지
• /
• 제21권11호
• /
• pp.1064-1069
• /
• 2015

Control Moment Gyro (CMG) has been used as an indirect actuator of a single-wheel robot system GYROBO, developed at Chungnam National University. The flip motion of the gimbal system produces the gyroscopic motion onto the body system while the body motion also produces the gyroscopic motion onto the gimbal system inversely. In this paper, the intuitive equation of the inverse gyroscopic effect is derived as the direct relation between the rate of the body system and the rate of the gimbal system. Experiments on the inverse gyroscopic effect under the chaotically generated disturbance are conducted. Experimental data are approximated by a linear equation using the least square method.

• 로봇학회논문지
• /
• 제16권3호
• /
• pp.283-290
• /
• 2021

We propose a task and motion planning algorithm for clearing obstacles and wiping surfaces, which is essential for surface disinfection during the pathogen disinfection process. The proposed task and motion planning algorithm determines task parameters such as grasping pose and placement location during the planning process without using pre-specified or discretized values. Furthermore, to quickly inspect many unit motions, we propose a motion feasibility prediction algorithm consisting of collision checking and an SVM model for inverse mechanics and self-collision prediction. Planning time analysis shows that the feasibility prediction algorithm can significantly increase the planning speed and success rates in situations with multiple obstacles. Finally, we implemented a hierarchical control scheme to enable wiping motion while following a planner-generated joint trajectory. We verified our planning and control framework by conducted an obstacle-clearing and surface wiping experiment in a simulated disinfection environment.

• 한국의류산업학회지
• /
• 제17권5호
• /
• pp.844-853
• /
• 2015

Recently, according to change of lifestyle and increase of concerning in health, needs of the smart clothing based on the vital sign monitoring have increased. Along with this trend, smart clothing for ECG monitoring has been studied various way as textile electrode, clothing design and so on. Smart clothing for ECG monitoring can become a comfortable system which enables continuous vital sign monitoring in daily use. But, smart clothing for ECG monitoring has a weakness on artifact during motion. One of the motion artifact caused by shifting of the electrode position was affected skin change by motion. The aim of this study was to suggest electrode locations for clothing of ECG monitoring to reduce of motion artifacts. Therefore, change of skin surface during the movement were measured and analyzed in order to find location to minimize motion artifacts in ECG monitoring clothing by 3D motion capture. For the experiment, the subjects consisted of 5 males and 5 females in their 20' with average physique. As a result, the optimal location for ECG monitoring was deducted under the bust line and scapula which have least motion artifact. These locations were abstracted to be least affected by movement in this research.

• 한국소음진동공학회논문집
• /
• 제15권1호
• /
• pp.39-45
• /
• 2005

This research develops an experimental method to measure the motion of a FDB spindle system with a 3.5' disk by using three capacitance probes fixed on the xyz-micrometers, and it shows that a FDB spindle system has the whirling, flying and tilting motion. It also shows that the whirling, flying and tilting motion converge very quickly to the steady state at the same time when the rotor reaches the steady-state speed. However, they are quite large even at the steady state when they are compared with the 10nm flying height of a magnetic head. For the FDB spindle system used in this experiment, the whirl radius and the peak-to-peak variation of flying height and tilting angle at the steady-state speed of 7,200rpm are 0.675m, 30nm and $5.758\times10^{-3^{\circ}}$, respectively, so that the radial motion of the FDB spindle system exceeds a track pitch of a 3.5' HDD with 90,000 TPI.

• 해양환경안전학회지
• /
• 제20권4호
• /
• pp.443-450
• /
• 2014

본 연구에서는 수중익 배치와 종모멘트 특성이 전몰형 수중익선의 종방향 운동 안정성에 미치는 영향에 대하여 Tandem 수중익 모형의 시험을 통하여 고찰한다. 먼저, Canard 날개배치를 가지는 Tandem 수중익 모형을 제작하고 수중익의 양력 및 항력 계측 실험을 수행하여 양력 및 항력 특성을 평가하였다. 또한 종방향 운동의 초기 안정성과 자기 안정성을 가지는 Tandem 수중익 모형의 날개 배치를 결정하였다. Tandem 수중익 모형의 종안정성 시험에서는 선수 및 선미 수중익의 종방향 간격 변화와 종모멘트의 자기안정성 변화에 따른 Pitch 및 Heave 운동 특성, 익주 상태의 종안정성을 평가하였다. 먼저, Canard 날개배치를 가지는 Tandem 수중익 모형을 제작하고 수중익의 양력 및 항력 계측 실험을 수행하여 양력 및 항력 특성을 평가하였다. 또한 종방향 운동의 초기 안정성과 자기 안정성을 가지는 Tandem 수중익 모형의 날개 배치를 결정하였다. Tandem 수중익 모형의 종안정성 시험에서는 선수 및 선미 수중익의 종방향 간격 변화와 종모멘트의 자기안정성 변화에 따른 Pitch 및 Heave 운동 특성, 익주 상태의 종안정성을 평가하였다. 실험 수행 결과 본 연구의 주요 결론의 다음과 같다. 종 모멘트 자기 안정성이 클수록 주어진 고정 pitch 각에서 pitch운동에 대한 자기안정성이 높다. 다음 종모멘트 자기 안정성이 클수록, pitch각도 변화에 따른 pitch운동 및 heave운동의 변동 폭이 상대적으로 작으며 종방향 안정성이 우수하다. 마지막으로 종모멘트 자기안정성이 클수록, 수중익 양력이 동일한 경우, Tandem 수중익의 안정적인 익주를 위해서는 충분한 종모멘트의 자기안정성을 확보하는 것이 필수적인 것을 시험을 통하여 확인하였다.

• 전기학회논문지
• /
• 제67권3호
• /
• pp.427-432
• /
• 2018

This paper uses a recursive least squares method to estimate the projectile motion trajectory of an object in real time. The equations of motion of the object are obtained considering the air resistance which occurs in the actual experiment environment. Because these equations consider air resistance, parameter estimation of nonlinear terms is required. However, nonlinear recursive least squares estimation is not suitable for estimating trajectory of projectile in that it requires a lot of computation time. Therefore, parameter estimation for real-time trajectory prediction is performed by recursive least square estimation after using Taylor series expansion to approximate nonlinear terms to polynomials. The proposed method is verified through experiments by using VICON Bonita motion capture system which can get three dimensional coordinates of projectile. The results indicate that proposed method is more accurate than linear Kalman filter method based on the equations of motion of projectile that does not consider air resistance.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.631-636
• /
• 2004

The sway motion control problem of a container hanging on the trolly is considered in the paper. In the container crane control problem, suppressing the residual swing motion of the container at the end of acceleration, deceleration or the case of that the unexpected disturbance input exists is main issue. For this problem, in general, many trolley motion control strategies are introduced and applied. In this paper, we introduce and synthesize a swing motion control system in which a small auxiliary mass is installed on the spreader made by ourselves. In this control system, the actuator reacting against the auxiliary mass applies inertial control forces to the container to reduce the swing motion in the desired manner. Especially, we apply the $H_{\infty}$ based gain-scheduling control technique the anti-sway control system design problem of the controlled plant. In this control system, the controller dynamics are adjusted in real-time according to time-varying plant parameters. And the experiment result shows that the proposed control strategy is shown to be useful to the case of time-varying system and, robust to disturbances like winds and initial sway motion.

• 한국실천공학교육학회논문지
• /
• 제5권1호
• /
• pp.34-39
• /
• 2013

본 연구에서는 사용자에게 가상환경에 존재하는 교육컨텐츠와 자연스럽게 안터랙션 할 뿐 아니라 인터랙션 양에 따라서 사용자에게 햅틱 정보를 전달해 줄수 있는 휴대용 입력장치를 제시한다. 제안하는 시스템은 사용자의 움직임을 측정하고 움직임에 따라서 사용자에게 햅틱 정보를 되돌려 준다. 교육 컨텐츠와 사용자의 인터랙션에 따른 햅틱 감각을 생성하기 위해 제안하는 입력장치는 모션 제어기, 햅틱 액츄에이터, 무선 통신 모듈, 그리고 모션센서로 구성한다. 사용자의 모션 입력을 측정하기 위해서 가속도 선서를 사용한다. 실험을 통해 제안하는 시스템이 떨림없이 안정적이고 연속적인 햅틱 감각이 생성됨을 파악한다.