• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.6
• /
• pp.47-53
• /
• 2007

True motion estimation is necessary for deinterlacing, frame-rate conversion, and film judder compensation. There have been several block-based approaches to find true motion vectors by tracing minimum sum-of-absolute-difference (SAD) values by considering spatial and temporal consistency. However, the algorithms cannot find robust motion vectors when the texture of objects is changed. To find the robust motion vectors in the region, a recursive vector selection scheme and an adaptive weighting parameter are proposed. Previous frame vectors are recursively averaged to be utilized for motion error region. The weighting parameter controls fidelity to input vectors and the recursively averaged ones, where the input vectors come from the conventional estimators. If the input vectors are not reliable, then the mean vectors of the previous frame are used for temporal consistency. Experimental results show more robust motion vectors than those of the conventional methods in time-varying texture objects.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.130.4-130
• /
• 2001

In this paper, a measurement system of moving distance is developed. The error compensation method is also proposed using the characteristics of walking motion. As personal navigation systems and multimedia systems are emerging into the commericial market, men´s moving distance is considered as one of the important information. GPS offers the information easily but GPS can be used only when the satellites are visible. INS can calculate the moving distance anywhere but error is increased with time due to the sensor bias. In this paper, to detect the human walking distance a measurement system of moving distance only using low-cost accelerometer is developed. The sensor bias is estimated and compensated using the walking motion characteristics. The performanced of the proposed system is verified by experiment.

• Journal of Institute of Control, Robotics and Systems
• /
• v.2 no.3
• /
• pp.242-247
• /
• 1996

In this paper, an optimal coning compensation algorithm for strapdown system is proposed by minimizing the coning error. The proposed algorithm is derived as a generalized form in that it contains the class of the existing coning algorithms and allows the design of optimal algorithm for various combinations of gyro samples. It is shown the magnitude of resulting algorithm errors depends mainly on the total number of gyro samples including present and previous gyro samples. Based on the results, the proposed algorithm enables the algorithm designers to develop the effective coning compensation algorithm according to their attitude computation specifications with ease. In addition, the multirate method which can efficiently implement the algorithm is presented.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.6
• /
• pp.651-656
• /
• 2014

This paper presents a compensation method for an accelerometer to measure acceleration data accurately when a robot manipulator moves slowly. Although the accelerometer works fine under the fast movement of a robot manipulator, low cost accelerometers provide relatively inaccurate acceleration data under slow movements. In order to correct the error of the sensor data in the slow motion, correction factors are obtained experimentally. Then those corrected data are used for the disturbance observer. Experimental studies of the position control of a robot manipulator are conducted by applying the DOB (Disturbance Observer) control using corrected acceleration data.

• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.2
• /
• pp.3-8
• /
• 2007

A machining system that generates accurate relative motions between the tool and workpiece is required to realize ultra precise machining or measurements. Accuracy improvements for each element of the machine are also required. This paper proposes a machining system that uses a compensation device for the six-degree-of-freedom (6-DOF) motion error between the tool and workpiece. The compensation device eliminates elastic and thermal errors of the joints and links due to temperature fluctuations and external forces. A hexapod parallel kinematics mechanism installed between the tool spindle and surface plate is passively actuated by a conventional machine. Then the parallel mechanism measures the 6-DOF motions. We describe the conception and fundamentals of the system and test a passively extensible strut with a compensation device for the joint errors.

• Journal of IKEEE
• /
• v.2 no.2 s.3
• /
• pp.285-293
• /
• 1998

This paper presents unequal error protection and error concealment techniques far robust H.263 video transmission over mobile channels. The proposed error protection scheme has three major features. First, it has the capability of preventing the loss of synchronization information in H.263 video stream as much as possible that the H.263 decoder can resynchronize at the next decoding point, if errors are occurred. Secondly, it employs an unequal error protection scheme to support variable coding rates using rate compatible punctured convolutional (RCPC) codes, dividing the encoded stream into two classes. Finally, a macroblock-interleaving scheme is employed in order to minimize the corruption of consecutive macroblocks due to burst errors, which can make a proper condition for error concealment. In addition, to minimize the spatial error propagations due to the variable length codes, a fast resynchronization scheme at the group of block layer is developed for recovering subsequent error-free macroblocks following the damaged macroblock. futhermore, error concealment techniques based on both side match criterion and overlapped block motion compensation (OBMC) are employed at the source decoder so that it can not only recover the lost macroblock more accurately, but also reduce blocking artifacts. Experimental results show that the proposed scheme can be an effective error protection scheme since proper video quality can be maintained under various channel bit error rates.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.10B
• /
• pp.1382-1389
• /
• 2001

움직임 보상-이산 코사인 변환 (motion compensation-discrete cosine transform : MC-DCT) 기반의 동영상 부호화 기법이 부호화 효율성 및 구현의 단순성으로 인해 널리 사용되고 있으나, 에러 환경에서 구조적으로 취약한 면이 있다. 본 논문에서는 다중 메모리 움직임 보상 예측 (long-term memory motion compensated prediction : LTMP) 기반의 다중 레프런스 프레임을 사용하여 에러에 강인한 동영상 부호화 기법을 제안한다. 또한 제안하는 알고리듬에 기반한 에러 은닉 기법 (error concealment : EC)을 구현한다. 즉, R-D (rate-distortion) 최적화에 프레임간 움직임 벡터 (temporal motion vectors)의 확산 인자를 추가하여 에러에 대한 강인성 및 에러 은닉 기법의 효율성을 증가시켰다. 또한, 제안하는 알고리듬은 시간축상의 에러 전파를 피드백 정보 (negative acknowledgement : NAK)를 사용하여 억제한다. 즉, NAK는 채널 에러에 의해 손실된 영역과 에러가 전파된 영역을 추정하여 움직임 보상 영역에서 제외되도록 하는데 이용된다. 따라서, 제안하는 알고리듬은 PSNR 측면에서 FIU (forced intra update)에 근사하는 성능을 보이나, FIU와는 달리 비트율의 증가를 피할 수 있어 제한된 대역폭의 네트웍을 효율적으로 사용할 수 있다. 컴퓨터 모의 실험을 통해 제안하는 알고리듬이 기존의 H.263 및 LTMP 기반의 부호기에 비해 에러 환경에서 주관적 및 객관적 화질 측면에서 성능이 우수함을 보인다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.85.4-85
• /
• 2001

A learning controller is presented for repetitive walking motion of biped robot. The learning control scheme learns the approximate inverse dynamics input of biped walking robot and uses the learned input pattern to generate an input profile of different walking motion from that learnt. In the learning controller, the PID feedback controller takes part in stabilizing the transient response of robot dynamics while the feedforward learning controller plays a role in computing the desired actuator torques for feedforward nonlinear dynamics compensation in steady state. It is shown that all the error signals in the learning control system are bounded and the robot motion trajectory converges to the desired one asymptotically. The proposed learning control scheme is ...

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.621-624
• /
• 1999

This paper describes a distance estimation method of object's motion in soccer image sequence by tracking field features. And we quantitatively evaluate the estimation accuracy We suppose that the input image sequence is taken with a camera on static axis and includes only zooming and panning transformation between frames. Adaptive template matching is adopted for non-rigid object tracking. For background compensation, feature templates selected from reference frame image are matched in following frames and the matched feature point pairs are used in computing Affine motion parameters. A perspective displacement field model is used for estimating the real distance between two position on Input Image. To quantitatively evaluate the accuracy of the estimation, we synthesized a 3 dimensional virtual stadium with graphic tools and experimented on the synthesized 2 dimensional image sequences. The experiment shows that the average of the error between the actual moving distance and the estimated distance is 1.84%.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.7
• /
• pp.65-71
• /
• 2001

The development process of the polishing system for the aspherical lens mold for opto-electronics industry is described. The system uses the method that polishing tool is scanned on the surface under PC-NC control for the aspherical lens mold. The two axes interpolation of the minimum translation mechanism is applied to give uniform working condition by motion analysis. An aspherical surface is divided into multiple sections and each dwell time is calculated from the polishing rate model based on the Preston equation. As result of form error compensation experiment, initial form error is decreased about 25% while an average value of surface roughness is also reduced successfully from 180nm to 19nm.