References
- Ramesh, R., Mannan, M. A. and Poo, A. N., 'Error compensation in machine tools - A review. Part I: Geometric, cutting-force induced and fixture-dependent errors,' International Journal of Machine Tools & Manufacture, Vol. 40, pp. 1235-1256, 2000 https://doi.org/10.1016/S0890-6955(00)00009-2
- Lee, G. D., Suh, D. J., Kim, S. H. and Kim, M. J., 'Design and manufacture of composite high speed machine tool structure,' Composites Science and Technology, Vol. 64, pp. 1523-1530, 2004 https://doi.org/10.1016/j.compscitech.2003.10.021
- Ramesh, R., Mannan, M. A. and Poo, A. N., 'Error compensation in machine tools - A review. Part II: Thermal errors,' International Journal of Machine Tools & Manufacture, Vol. 40, pp. 1257-1284, 2000 https://doi.org/10.1016/S0890-6955(00)00010-9
- Lee, S. D., Choi, Y. J. and Choi, D.H., 'ICA based thermal source extraction and thermal distortion compensation method for a machine tool,' International Journal of Machine Tool & Manufacture, Vol. 43, pp.589-597, 2003 https://doi.org/10.1016/S0890-6955(03)00017-8
- Oiwa, T., 'Accuracy improvement of parallel kinematics machine-error compensation system for joints, links and machine frame,' Proceedings of the 6th International Conference on Mechatronics Technology (ICMT2002), pp. 433-438, 2002
- Oiwa, T. 'Error compensation system for joints, inks and machine frame of parallel kinematics machines,' International Journal of Robotics Research, Vol. 24, No. 12, pp. 1087-1102, 2005 https://doi.org/10.1177/0278364905060149
- Oiwa, T. and Tamaki, M., 'Study on Abbe's principle in parallel kinematics,' Proceedings of the 2nd Chemnitz Parallel Kinematics Seminar, pp. 345-352, 2000
- Oiwa, T. and Tamaki, M., 'A study on Abbe's principle of sixdegree-of-freedom parallel mechanism (effect of joint runout on motion error of mechanism),' Transactions of the Japan Society of Mechanical Engineers, Vol. 69, pp. 472-477, 2003 https://doi.org/10.1299/kikaic.69.472
- Bryan, J. B. and Carter, D. L., 'Design of a new error-corrected coordinate measuring machine,' Precision Engineering, Vol. 3, pp. 125-128, 1978 https://doi.org/10.1016/0141-6359(81)90002-7