• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.603-609
• /
• 2018

Sudden death during sleep often occurs in different age groups. To prevent an unexpected sudden death, sleep monitoring is required. This paper presents a video analysis method to detect sudden death without using any attachable sensors. In the proposed method, a motion magnification technique detects even very subtle motion during sleep. If the magnification cannot detect motion, the proposed method readily decides on abnormal status (possibly sudden death). Experimental results on two kinds of sleep video show that motion magnification-based video analysis could be useful for discriminating sleep (with very subtle motion) from sudden death.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1273-1276
• /
• 2005

A displacement magnification mechanism is usually employed in a nano-positioning stage to achieve a large stage motion. A lever mechanism is the most widely used displacement magnifying mechanism. For more large stage motion, double or multiple lever mechanisms can be used. In this case, a more accurate analysis model is needed. This study proposes a more reasonable analysis model for a multiple lever mechanism based on the single lever mechanism model. This paper describes that the high equivalent stiffness of the lever is the most important factor reducing the magnification ratio of the lever mechanism through increasing the deflection of the link and including the axial displacement of the pivot.

• ETRI Journal
• /
• v.44 no.5
• /
• pp.816-825
• /
• 2022

Nondestructive testing, which can monitor a product's interior without disassembly, is becoming increasingly essential for industrial inspection. Computed laminography (CL) is widely used in this application, as it can reconstruct a product, such as a printed circuit board, into a three-dimensional (3D) high-magnification image using X-rays. However, such high-magnification scanning environments can be affected by minute vibrations of the CL device, which can generate motion artifacts in the 3D reconstructed image. Since such vibrations are irregular, geometric corrections must be performed at every scan. In this paper, we propose a geometry calibration method that can correct the geometric information of CL scans based on the image without using geometry calibration phantoms. The proposed method compares the projection and digitally reconstructed radiography images to measure the geometric error. To validate the proposed method, we used both numerical phantom images at various magnifications and images obtained from real industrial CL equipment. The experiment results confirmed that sharpness and contrast-to-noise ratio (CNR) were improved.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.38 no.5
• /
• pp.74-84
• /
• 1996

Dynamic loading of structures often causes excursions of stresses well into the inelastic range and the influence of geometric changes on the dynamic response is also significant in many cases. Therefore, both material and geometric nonlinearity effects should be considered in case that a dynamic load acts on the structure. For developing a program to analyze the dynamic response of an axisymmetric shell in this study, the material nonlinearity effect on the dynamic response was formulated by the elasto-viscoplastic model highly corresponding to the real behavior of the material. Also, the geometrically nonlinear behavior is taken into account using a total Lagrangian coordinate system, and the equilibrium equation of motion was numerically solved by a central difference scheme. A complete finite element program has been developed and the results obtained by it are compared with those in the references 1 and 2. The results are in good agreement with each other. As a case study of its application, the developed program was applied to a dynamic response analysis of a nuclear reinforced concrete containment structure. The results obtained from the' numerical examples are summarized as follows : 1. The dynamic magnification factor of the displacement and the stress were unrelated with the concrete strength. 2. As shown by the results that the displacement dynamic magnification factor were form 1.7 to 2.3 and the stress dynamic magnification factor from 1.8 to 2.5, the dynamic magnification factor of stress were larger than that of displacement. 3. The dynamic magnification factor of stress on the exterior surface was larger than that on the interior surface of the structure.

• Archives of Plastic Surgery
• /
• v.41 no.3
• /
• pp.225-230
• /
• 2014

The increased application of the da Vinci robotic platform (Intuitive Surgical Inc.) for microsurgery has led to the development of new adjunctive surgical instrumentation. In microsurgery, the robotic platform can provide high definition $12{\times}-15{\times}$ digital magnification, broader range of motion, fine instrument handling with decreased tremor, reduced surgeon fatigue, and improved surgical productivity. This paper presents novel adjunctive tools that provide enhanced optical magnification, micro-Doppler sensing of vessels down to a 1-mm size, vein mapping capabilities, hydro-dissection, micro-ablation technology (with minimal thermal spread-$CO_2$ laser technology), and confocal microscopy to provide imaging at a cellular level. Microsurgical outcomes from the use of these tools in the management of patients with infertility and chronic groin and testicular pain are reviewed. All these instruments have been adapted for the robotic console and enhance the robot-assisted microsurgery experience. As the popularity of robot-assisted microsurgery grows, so will its breadth of instrumentation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.177-180
• /
• 2000

In this paper, we studied efficiency improvement of linear ultrasonic motor using projection. The principle of ultrasonic motor is to use an elliptic motion generated at the side of the vibrator, and the elliptic motion of the ultrasonic motor was obtained by complex oscillation of L$_1$-B$_4$ mode. As the experimental results, the efficiency of linear ultrasonic motor without projection was 1.52[%] when applied voltage was 56[V] in resonance frequency 58.4[kHz]. The efficiency of linear ultrasonic motor using projection was 3.36[%] when applied voltage was 56[V] in resonance frequency 58.4[kHz]. The efficiency was improved by projection.

• Archives of Reconstructive Microsurgery
• /
• v.12 no.2
• /
• pp.112-118
• /
• 2003

Purpose : Soft tissue defect and exposed tendons and bones with concomitant infection in the foot and lower leg have to be covered with vascularized flap as the one stage treatment. Authors have performed 6 cases of pedicled dorsalis pedis island flaps under the loupes magnification and evaluated the benefits. Materials and methods : From 1994 through 2003, we have performed 6 pedicled dorsalis pedis island flaps for reconstruction of soft tissue defects in the foot and lower leg. The causes were trauma in 3 cases, skin necrosis and secondary infection after Achilles tendon repair in 2 cases and acute osteomyelitis in 1 case. Average age was 38 years and 5 cases were male and 1 female. The results of the procedure was evaluated by survival of the island flap, comfort in putting on shoes and walking, comfort in the donor site, comfort in the recipient site and range of motion of the ankle joint. Results : All pedicled dorsalis pedis island flaps survived except 1. Three cases felt discomfort in the dorsum of foot as the donor site and 1 case of the Achilles tendon ruptured and repaired showed limited dorsiflexion of ankle joint. Conclusion : Nonmicrosurgical pedicled dorsalis pedis island flaps under the loupes magnification are one of the useful treatment methods because procedure is rapid, survival is confident and overall reconstructive results are good.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1999.10a
• /
• pp.241-248
• /
• 1999

Structural damage during an earthquake is caused by the response of the structure to the ground motion input at its base. The dynamic force produced in the structure are due to the inertia of its vibrating elements. The response of the structure exceeds the ground motion and this dynamic magnification depends on the duration and frequency content of the ground vibration, the soil properties at the site, distance from the epicenter and the dynamic characteristics of the structure. Earthquake load used in this study as a input data was artificially simulated with the design spectrum diagram in the Korean Earthquake Resistant Design Code. This paper presents the seismic analysis of the continuous preflex composite girder bridges according to variation of pier's height and span's length.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.145-153
• /
• 2003

The resonant column testing determines the shear modulus and material damping factor dependent on the shear strain magnitude, based on the wave-propagation theory. The determination of the dynamic soil properties requires the theoretical formulation of the dynamic behavior of the resonant column testing system. One of the theoretical formulations is the use of the wave equation for the soil specimen in the resonant column testing device. Wood, Richart and Hall derived the wave equation by assuming the linear elastic soil, and didn't take the material damping into consideration. Hardin incorporated the viscoelastic damping of soil in the wave equation, but he had to assume the material damping factor for the determination of the shear modulus. For the better theoretical formulation of the resonant column testing, this study derived a new wave equation to include the viscosity of soil, and proposed an approach for the solution. Also, in this study, the equation of motion for the testing system, which is another approach of the theoretical formulation of the resonant column testing, was also derived. The equation of motion leads to the better understanding of the resonant column testing, which includes the dynamic magnification factor and the phase angle of the response. For the verification of the proposed equation of motion for the resonant column testing, the finite element analysis was performed for the resonant column testing. The comparison of the dynamic magnification factors and the phase angles far the system response were performed.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.494-497
• /
• 2008

DIMPEC, Direct Interactive Motion Picture Electronic Commerce technique is not only that gain additional detail information on the entry properties and actor custom by seeing and hearing VOD and TV drama with internet but also source technology which can buy product using electronic commerce. Also, this is enable to construct in variety platform environment like internet, PDA, MOBILE, Settop box, and this is a technology where competition is very high due to application is possible to satellite DMB, and DMB for ground which is high technology IT. DIMPEC is expected that next generation business model will be formed by combining to user participation, consumption magnification of mobile contents, advancement and intelligence of internet service which is next generation internet business model which combines this technique.