• 한국산학기술학회논문지
• /
• 제19권10호
• /
• pp.603-609
• /
• 2018

수면 중 돌연사는 급성 심근경색 등의 이유로 노인 뿐 만 아니라 영아나 20~40대와 같은 비교적 젊은 층에서도 종종 발생하고 있다. 수면 중 돌연사는 미리 예측하기 어려우므로 이를 방지하기 위해서는 수면 모니터링이 필요하다. 본 논문에서는 별도의 센서 부착 없이도 수면 중 돌연사 감지를 할 수 있는 새로운 비디오 분석 방법을 제안한다. 제안하는 비디오 분석 방법에서는 호흡에 의한 미세 움직임을 감지하기 위해 모션 증폭 기법을 적용한다. 모션 증폭을 적용했는데도 프레임 간 차이가 거의 없는 경우, 모션이 존재하지 않아 돌연사 가능성이 있는 것으로 판단한다. 수면 중인 아기를 촬영한 비디오 두 편에 대해 모션 증폭을 적용한 결과, 호흡에 의한 미세 모션을 정확하게 감지하였고, 이는 수면 상태와 돌연사를 구분하는데 유용할 것으로 판단되었다. 제안하는 비디오 분석 방법은 신체에 센서 부착을 필요로 하지 않으므로 아기를 키우는 가정이나 독신 가정에서 편리하게 활용될 수 있을 것이다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1273-1276
• /
• 2005

A displacement magnification mechanism is usually employed in a nano-positioning stage to achieve a large stage motion. A lever mechanism is the most widely used displacement magnifying mechanism. For more large stage motion, double or multiple lever mechanisms can be used. In this case, a more accurate analysis model is needed. This study proposes a more reasonable analysis model for a multiple lever mechanism based on the single lever mechanism model. This paper describes that the high equivalent stiffness of the lever is the most important factor reducing the magnification ratio of the lever mechanism through increasing the deflection of the link and including the axial displacement of the pivot.

• ETRI Journal
• /
• 제44권5호
• /
• pp.816-825
• /
• 2022

Nondestructive testing, which can monitor a product's interior without disassembly, is becoming increasingly essential for industrial inspection. Computed laminography (CL) is widely used in this application, as it can reconstruct a product, such as a printed circuit board, into a three-dimensional (3D) high-magnification image using X-rays. However, such high-magnification scanning environments can be affected by minute vibrations of the CL device, which can generate motion artifacts in the 3D reconstructed image. Since such vibrations are irregular, geometric corrections must be performed at every scan. In this paper, we propose a geometry calibration method that can correct the geometric information of CL scans based on the image without using geometry calibration phantoms. The proposed method compares the projection and digitally reconstructed radiography images to measure the geometric error. To validate the proposed method, we used both numerical phantom images at various magnifications and images obtained from real industrial CL equipment. The experiment results confirmed that sharpness and contrast-to-noise ratio (CNR) were improved.

• 한국농공학회지
• /
• 제38권5호
• /
• pp.74-84
• /
• 1996

Dynamic loading of structures often causes excursions of stresses well into the inelastic range and the influence of geometric changes on the dynamic response is also significant in many cases. Therefore, both material and geometric nonlinearity effects should be considered in case that a dynamic load acts on the structure. For developing a program to analyze the dynamic response of an axisymmetric shell in this study, the material nonlinearity effect on the dynamic response was formulated by the elasto-viscoplastic model highly corresponding to the real behavior of the material. Also, the geometrically nonlinear behavior is taken into account using a total Lagrangian coordinate system, and the equilibrium equation of motion was numerically solved by a central difference scheme. A complete finite element program has been developed and the results obtained by it are compared with those in the references 1 and 2. The results are in good agreement with each other. As a case study of its application, the developed program was applied to a dynamic response analysis of a nuclear reinforced concrete containment structure. The results obtained from the' numerical examples are summarized as follows : 1. The dynamic magnification factor of the displacement and the stress were unrelated with the concrete strength. 2. As shown by the results that the displacement dynamic magnification factor were form 1.7 to 2.3 and the stress dynamic magnification factor from 1.8 to 2.5, the dynamic magnification factor of stress were larger than that of displacement. 3. The dynamic magnification factor of stress on the exterior surface was larger than that on the interior surface of the structure.

• Archives of Plastic Surgery
• /
• 제41권3호
• /
• pp.225-230
• /
• 2014

The increased application of the da Vinci robotic platform (Intuitive Surgical Inc.) for microsurgery has led to the development of new adjunctive surgical instrumentation. In microsurgery, the robotic platform can provide high definition $12{\times}-15{\times}$ digital magnification, broader range of motion, fine instrument handling with decreased tremor, reduced surgeon fatigue, and improved surgical productivity. This paper presents novel adjunctive tools that provide enhanced optical magnification, micro-Doppler sensing of vessels down to a 1-mm size, vein mapping capabilities, hydro-dissection, micro-ablation technology (with minimal thermal spread-$CO_2$ laser technology), and confocal microscopy to provide imaging at a cellular level. Microsurgical outcomes from the use of these tools in the management of patients with infertility and chronic groin and testicular pain are reviewed. All these instruments have been adapted for the robotic console and enhance the robot-assisted microsurgery experience. As the popularity of robot-assisted microsurgery grows, so will its breadth of instrumentation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.177-180
• /
• 2000

In this paper, we studied efficiency improvement of linear ultrasonic motor using projection. The principle of ultrasonic motor is to use an elliptic motion generated at the side of the vibrator, and the elliptic motion of the ultrasonic motor was obtained by complex oscillation of L$_1$-B$_4$ mode. As the experimental results, the efficiency of linear ultrasonic motor without projection was 1.52[%] when applied voltage was 56[V] in resonance frequency 58.4[kHz]. The efficiency of linear ultrasonic motor using projection was 3.36[%] when applied voltage was 56[V] in resonance frequency 58.4[kHz]. The efficiency was improved by projection.

• Archives of Reconstructive Microsurgery
• /
• 제12권2호
• /
• pp.112-118
• /
• 2003

Purpose : Soft tissue defect and exposed tendons and bones with concomitant infection in the foot and lower leg have to be covered with vascularized flap as the one stage treatment. Authors have performed 6 cases of pedicled dorsalis pedis island flaps under the loupes magnification and evaluated the benefits. Materials and methods : From 1994 through 2003, we have performed 6 pedicled dorsalis pedis island flaps for reconstruction of soft tissue defects in the foot and lower leg. The causes were trauma in 3 cases, skin necrosis and secondary infection after Achilles tendon repair in 2 cases and acute osteomyelitis in 1 case. Average age was 38 years and 5 cases were male and 1 female. The results of the procedure was evaluated by survival of the island flap, comfort in putting on shoes and walking, comfort in the donor site, comfort in the recipient site and range of motion of the ankle joint. Results : All pedicled dorsalis pedis island flaps survived except 1. Three cases felt discomfort in the dorsum of foot as the donor site and 1 case of the Achilles tendon ruptured and repaired showed limited dorsiflexion of ankle joint. Conclusion : Nonmicrosurgical pedicled dorsalis pedis island flaps under the loupes magnification are one of the useful treatment methods because procedure is rapid, survival is confident and overall reconstructive results are good.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 가을 학술발표회 논문집
• /
• pp.241-248
• /
• 1999

Structural damage during an earthquake is caused by the response of the structure to the ground motion input at its base. The dynamic force produced in the structure are due to the inertia of its vibrating elements. The response of the structure exceeds the ground motion and this dynamic magnification depends on the duration and frequency content of the ground vibration, the soil properties at the site, distance from the epicenter and the dynamic characteristics of the structure. Earthquake load used in this study as a input data was artificially simulated with the design spectrum diagram in the Korean Earthquake Resistant Design Code. This paper presents the seismic analysis of the continuous preflex composite girder bridges according to variation of pier's height and span's length.

• 한국지반공학회논문집
• /
• 제19권4호
• /
• pp.145-153
• /
• 2003

공진주 실험은 탄성파 이론을 이용하여 흙의 동적 물성, 즉 전단변형률의 크기에 따른 전단탄성계수와 재료감쇠비를 측정하는 실험이다. 공진주 실험에 의한 시료의 동적물성의 측정은 공진주 실험 시스템의 동적 거동에 대한 이해를 전제로 한다. 공진주 실험의 시료 및 실험장치의 구성은 고정단-자유단 경계조건을 가지고 있는 연속보로 단순화할 수 있어서, Richart, Hall and Woods는 공진주 실험 시스템에 대한 파동방정식을 유도하였으나, 시료를 단순히 탄성으로 가정하였고 시료의 점성을 고려하지는 않았다. 그리고, Hardin은 파동방정식의 유도에서 시료의 점탄성을 고려하였으나, 시료의 전단탄성계수를 결정하기 위하여 시료의 점탄성을 가정하여야 하는 문제점을 가지고 있었다. 본 연구에서는 기존의 연구자들이 시도했던 공진주 실험 시스템에 대한 파동방정식을 새로운 측면에서 유도하였으며, 새로이 유도된 파동방정식의 해법을 제안하였다. 한편, 일반적으로 시스템에 대한 동적 거동을 이해하는 방법으로, 시스템의 운동방정식을 이용하는 방법이 있으나, 공진주 실험 시스템에 대한 동적 거동의 해석방법으로 이와 같은 운동방정식을 이용하는 해석방법을 연구한 경우는 거의 없었다. 운동방정식에 의한 해법은 시스템의 동적 증폭계수와 동적 응답에 대한 위상각을 구할수 있기 때문에 파동방정식에 대한 해법보다 더 많은 정보를 활용할 수 있는 장점이 있다. 따라서, 본 연구에서는 공진주 실험 시스템에 대한 보다 기본적이고 많은 정보를 도출하기 위하여, 공진주 실험 시스템에 대한 운동방정식을 유도하였으며, 이를 이용하여 공진주 실험자료를 해석하는 새로운 해석기법의 제안을 위한 근간을 마련하였다. 그리고, 공진주 실험 시스템에 대한 유한요소 해석을 수행하여, 본 연구에서 제안한 공진주 실험시스템의 이론적 모델링의 타당성과 합리성을 검증하였다.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2008년도 춘계 종합학술대회 논문집
• /
• pp.494-497
• /
• 2008

동영상기반 양방향 직접 전자상거래(DIMPEC, Direct Interactive Motion Picture Electronic Commerce) 기술은 인터넷으로 VOD, TV 드라마를 시청하면서 등장 소품, 배우 의상 등에 대한 부가 상세 정보를 얻을 수 있을 뿐 아니라 전자상거래를 이용하여 제품을 구매할 수 있는 원천기술이다. 또한 인터넷, PDA, Mobile, Settop Box 등 다양한 플랫폼 환경에서 구축이 가능하며, 최첨단 IT 기술인 위성 DMB, 지상파 DMB 등 에도 응용이 가능하여 경쟁력이 매우 높은 기술이다. 본 기술을 접목한 차세대 인터넷 비즈니스 모델인 이용자 참여, 동영상 콘텐츠의 소비 확대, 인터넷 서비스의 고도화 지능화, 모바일에 접목되어 차세대 비즈니스 모델을 형성할 것으로 예상 된다.