• International Journal of Control, Automation, and Systems
• /
• 제6권2호
• /
• pp.234-242
• /
• 2008

The purpose of this paper is to verify the practical effectiveness of an interphalangeal coordination-based joint motion planning method for humanoid finger operations. For the purpose, several experiments have been performed and comparative experimental results are shown. Through the experimental works, it is confirmed that according to the employed joint motion planning method, the joint configurations for a finger's trajectory can be planned stably or not, and consequently the actual joint torque command for controlling the finger can be made moderately or not. Finally, this paper analyzes that the interphalangeal coordination-based joint motion planning method is practically useful for implementing a stable finger manipulation. It is remarkably noted that the torque pattern by the method is well-balanced. Therefore, it is expected that the control performance of humanoid or prosthetic fingers can be enhanced by the method.

• 한국운동역학회지
• /
• 제28권2호
• /
• pp.109-117
• /
• 2018

Objective: To compare head and hand movement patterns during squash forehand motions between experts and less-skilled squash players. Method: Four experts and four less-skilled squash players participated in this study. They performed squash forehand swings and a VICON motion analysis system was used to obtain displacement and velocity data of the head and right hand during the movement. Mann-Whitney U-tests were performed to compare head and hand range of motion and peak velocity, and cross-correlation was performed to analyze the head-hand coordination pattern between groups in three movement directions. Results: In terms of head and hand kinematic data, experts had greater head range of motion during down swings than less-skilled squash players. Experts seemed to reach peak hand velocity at impact by reaching peak head velocity followed by hand peak velocity within a given temporal sequence. In terms of head-hand coordination patterns, both groups revealed high positive correlations in the medial-lateral direction, indicating a dominant allocentric coordination pattern. However, experts had uncoupled coordination patterns in the vertical direction and less-skilled squash players had high positive correlations. These results indicate that the head-hand movement pattern likely an important factor squash forehand movement. Conclusion: Analysis of head and hand movement patterns could be a key variable in squash training to reach expert-level performance.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1093-1098
• /
• 2003

In this paper, a practical methodology of hand-manipulator motion coordination for indoor service robot is introduced. This paper describes the procedures of opening door performed by service robot as a noticeable example of motion coordination. This paper presents well-structured framework for hand-manipulator motion coordination, which includes intelligent sensor data interpretation, object shape estimation, optimal grasping, on-line motion planning and behavior-based task execution. This proposed approach is focused on how to integrate the respective functions in harmony and enable the robot to complete its operation under the limitation of usable resources. As a practical example of implementation, the successful experimental results in opening door whose geometric parameters are unknown beforehand are provided.

• International Journal of Control, Automation, and Systems
• /
• 제4권2호
• /
• pp.217-226
• /
• 2006

Grasping and manipulation by hands can be considered as one of inevitable functions to achieve the performances desired in humanoid operations. When a humanoid robot manipulates an object by his hands, each finger should be well-controlled to accomplish a precise manipulation of the object grasped. So, the trajectory of each joint required for a precise finger motion is fundamentally necessary to be planned stably. In this sense, this paper proposes an effective joint motion planning method for humanoid fingers. The proposed method newly employs a bio-mimetic concept for joint motion planning. A suitable model that describes an interphalangeal coordination in a human finger is suggested and incorporated into the proposed joint motion planning method. The feature of the proposed method is illustrated by simulation results. As a result, the proposed method is useful for a facilitative finger motion. It can be applied to improve the control performance of humanoid fingers or prosthetic fingers.

• Journal of Mechanical Science and Technology
• /
• 제17권2호
• /
• pp.221-229
• /
• 2003

In the virtual environment, reality can be enhanced by offering the motion based on a motion simulator in harmony with visual and auditory modalities. In this research the Stewart-Gough-platform-based motion simulator has been developed. Implementation of vehicle dynamics is necessary in the motion simulator for realistic sense of motion, so bicycle dynamics is adopted in this research. In order to compensate for the limited range of the motion simulator compared with the real vehicle motion, washout algorithm composed of high-pass filter, low-pass filter and tilt coordination is usually employed. Generally, the washout algorithm is used with fixed parameters. In this research a new approach is proposed to tune the filter parameters based on fuzzy logic in real-time. The cutoff frequencies of the filters are adjusted according to the workspace margins and driving conditions. It is shown that the washout filter with the fuzzy-based parameters presents better performance than that with the fixed ones.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1609-1614
• /
• 2003

This paper presents a new method driving multiple robots to their goal position without collision. To consider the movement of the robots in a work area, we adopt the concept of avoidability measure. To implement the concept in collision avoidance of multiple robots, relative distance between the robots is proposed. The relative distance is a virtual distance between robots indicating the threat of collision between the robots. Based on the relative distance, the method calculates repulsive force against a robot from the other robots. Also, attractive force toward the goal position is calculated in terms of the relative distance. The proposed method is simulated for several cases. The results show that the proposed method steers robots to open space anticipating the approach of other robots. The proposed method works as a local collision-free motion coordination method in conjunction with higher level of task planning and path planning method for multiple robots to do a collaborative job.

• Transactions on Control, Automation and Systems Engineering
• /
• 제4권1호
• /
• pp.56-61
• /
• 2002

In this paper we describe an approach to coordinating the motion of a human with a mobile robot moving in a populated, continuously changing. natural environment. Our test application is a wheelchair accompanying a person through the concourse of a railway station moving side by side with the person. Our approach is based on a method for motion planning amongst moving obstacles known as Velocity Obstacle approach. We extend this method by a method for tracking a virtual target which allows us to vary the robot's heading and velocity with the locomotion of the accompanied person and the state of the surrounding environment.

• 융합보안논문지
• /
• 제15권4호
• /
• pp.149-154
• /
• 2015

본 연구는 지적장애아동들이 가상현실을 기반으로 한 기능성 게임에 참여하는 과정에서 행동 및 운동수행능력에 어떠한 변화가 보이는지 분석하는데 그 목적이 있다. 본 연구는 지적장애아동 5명을 대상으로 주 2회, 16주간 프로그램을 진행하였다. 그 결과 가상현실을 기반으로 한 기능성 게임에 참여한 지적장애아동은 주의집중, 안정된 움직임, 자신감있는 동작 등과 같은 행동의 변화를 보였으며, 운동수행능력의 경우 하위영역 - 정적 협응, 손동작 협응, 일반동작 협응, 운동속도, 동시적 자발동작, 단일 동작 수행능력- 모두에서 긍정적 변화를 나타냈다. 이와 같은 연구 결과를 바탕으로 가상현실을 기반으로 한 기능성 게임을 체계적이고 규칙적으로 적용하게 되면 지적장애인의 행동변화와 운동수행능력에 긍정적 효과를 가져올 수 있을 것이다.

• 한국운동역학회지
• /
• 제18권4호
• /
• pp.179-189
• /
• 2008

본 연구는 9명의 남자 중학교 초보피험자들을 대상으로 태권도 옆차기 동작의 숙련정도에 따른 운동학적 협응과정을 살펴보는 데 목적을 두었다. 이용된 변인은 최대합성직선속도, 분절간 각속도, 각도 대 각도 도면이었다. 분석결과, 연습후기로 갈수록 인접한 분절간의 운동량 전이가 잘 이루어져 각 분절의 최대합성직선속도가 유의하게 증가하였으며 분절간 각속도에서 학습후기로 갈수록 몸통에서 대퇴, 하퇴분절로의 순차적인 전이를 보였으며 던지는 듯하면서 미는 듯한 동작형태를 보였다. 엉덩관절과 무릎관절의 각도-각도 도면에서는 학습초기에는 다이나믹스한 변화를 보였으나 학습이 됨에 따라 숙련된 피험자처럼 안정적인 협응 패턴을 보여주었다.

• 제어로봇시스템학회논문지
• /
• 제5권8호
• /
• pp.961-968
• /
• 1999

In this paper we handle a system that transform sensor data to sensor information. Sensor informations from redundant accelerometers are manipulated to represent the configuration of objects carrying sensors. Basic sensor unit of the proposed systme is composed of 3 accelerometers that are aligned along x-y-z coordination axes of motion. To refine the sensor information, at first the sensor data are fused by geometrical optimization to reduce the variance of sensor information. To overcome the error caused from inexact alignment of each sensor to the coordination system, we propose a calibration technique that identifies the transformation between the coordinate axes and real sensor axes. The calibration technique make the sensor information approach real value. Also, we propose a technique that decomposes the accelerometer data into motion acceleration component and gravity acceleration component so that we can get more exact configuration of objects than in the case of raw sensor data. A set of experimental results are given to show the usefulness of the proposed method as well as the experiments in which the proposed techniques are applied to human body motion capture.