• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.115-118
• /
• 2004

Images with high resolution are desired and often required in many visual applications. When resolution can not be improved by replacing sensors, either because of cost or hardware physical limits, super resolution image reconstruction method is what can be resorted to. Super resolution image reconstruction method refers to image processing algorithms that produce high quality and high resolution images from a set of low quality and low resolution images. The method is proved to be useful in many practical cases where multiple frames of the same scene can be obtained, including satellite imaging, video surveillance, video enhancement and restoration, digital mosaicking, and medical imaging. The method can be either the frequency domain approach or the spatial domain approach. Much of the earlier works concentrated on the frequency domain formulation, but as more general degradation models were considered, later researches had been almost exclusively on spatial domain formulations. The method in spatial domains has three stages: i) motion estimate or image registration, ii) interpolation onto high resolution grid and iii) deblurring process. The super resolution grid construction in the second stage was discussed in this paper. We applied the Maximum A­Posteriori(MAP) reconstruction method that is one of the major methods in the super resolution grid construction. Based on this method, we reconstructed high resolution images from a set of low resolution images and compared the results with those from other known interpolation methods.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.1 s.35
• /
• pp.37-47
• /
• 2006

In the last years a low-altitude image acquisition technology has been developed in application of frequent change monitoring in urban area md speedy surveillance in disaster area. A low-altitude photogrammetric system have advantages of accurate observation and free data-acquisition time. Especially, an unmaned RC-helicopter, improving safety, durability and portability, comes into the spotlight as a built-in vehicle in close range photogrammetric application due to their capability of safe near-by observation and effective flight performance. This paper gives a methodology for generating image map by development of low cost and timesaving low-altitude photogrammetric UAV(unmaned aerial vehicles) for collecting high-resolution image data, and implement of geo-rectification and image mosaicking.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.1
• /
• pp.116-124
• /
• 2008

This study presents the application of multi-temporal and multi-scale panchromatic aerial photos for change detection in a small urban area. For aerial photos of the scale of 1:20,000 taken in 1987 and 1996 and the scale of 1:37,500 taken in 2000. Pre-processing that make the same conditions to all of the aerial photos was carried out through geometric correction, registration, contrasting, resamplimg, and mosaicking and then change detection were carried out respectively by image differencing and image ratio techniques. As a result, the change of urban features and landcover were able to be detected from panchromatic aerial photos that is single-band images and then the detected change results were compared between both techniques.

• The Journal of the Korea Contents Association
• /
• v.14 no.5
• /
• pp.425-435
• /
• 2014

The research for extracting man-made features such as building and road from the aerial photograph or satellite imagery has been performed actively. As lately the resolution of digital aerial photographs was improved, unwanted features(noise) would be often detected. An edge detection algorithm is developed to make up for such a noise problem, make boundaries of wanted objects clear and extract only needed features. The algorithm developed in this research performs separating RGB channels, differencing between channels, transforming in to binary images, excluding noises and restoring shapes, and edge extraction in order. The images to be used for edge detection are prepared through bundle adjustment, DTM extraction, orthorectification and mosaicking. The roof edges of small building on preprocessed digital aerial orthophotos were extracted using the algorithm developed in this study. The validity of the algorithms was proved by comparing edge results of small building extracted in this study with those of conventional methods.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.1
• /
• pp.96-96
• /
• 2001

The aim of this study was to find out and confirm the project formulation, feasibility, scale and locations on the farmland development projects such as planned and ongoing tideland reclamation and irrigation facilities along the western coast of North Korea using satellite image data, Landsat TM, JERS OPS and SPOT PAN and aged maps. In order to apply to the study, remote sensing technologies such as geometric correction. digital mosaicking, image merging, linear extraction and land cover classification were studied. As the results of the study, the reclaimable tidal flats are recognized at about 178,000 ha equivalent to 59% of announced 300,000ha. and 16,000 ha of completed, 17,000 ha of ongoing project areas although 27,000 ha were revealed to be completed during 1987-1993. Almost planned projects are appeared to be shortage of water supply due to their small watersheds, however, most projects are connected with 2000 mile canal system.

• Journal of IKEEE
• /
• v.6 no.2 s.11
• /
• pp.152-160
• /
• 2002

This paper is the realization of the face recognition system for multimedia application. This system is focused on the design concerning the improvement of recognition rate and the reduction of processing time for face recognition. The non-modificated application of typical RGB color system enables the reduction of time required for color system transform. The neural network and the application of algorithm using face characteristic improves the recognition rate. After mosaicking an image, a face-color block has been selected through the color analysis of mosaic block. The characteristic of the face removes the mis-checked face-color candidate block. Finally, from the face color block, four special values are obtained. These values are processed to the neural network using the back propagation algorithm. The output values are the touchstone to decide the genuineness of face field. The realized system showed 90% of face recognition rate with less than 0.1 second of processing time. This result can be understood as sufficient processing time and recognition rate to find out the face block for multimedia application in dynamic image.

• Journal of the Korea Computer Graphics Society
• /
• v.7 no.2
• /
• pp.29-35
• /
• 2001

In general, image-based virtual environment is represented by panoramic images created by image mosaic algorithm. The cylindrical panoramic image supports the fixed-viewpoint navigation due to the constraints of construction. Shum proposed concentric mosaics to allow users to navigate freely within a circular area[10]. It is constructed by a sequence of images which is acquired from a regularly rotating camera. Concentric mosaics technique, proposed by Shum, is considered as 3D plenoptic function which is defined three parameters : distance, height and angle. In this paper, we suggest an effective method for creating concentric mosaics, in which we first align a set of strip images on the cylinder plane and stitch the aligned strips to build a panoramic image. The proposed method has no constraints such as regular panning motion of camera. Furthermore, our proposed method minimizes the use of interpolation image to create a novel view images from the concentric mosaics. It allows the result image on a novel view to have better quality with respect to the number of input images.

• Spatial Information Research
• /
• v.13 no.4 s.35
• /
• pp.345-354
• /
• 2005

Super resolution image reconstruction method refers to image processing algorithms that produce a high resolution(HR) image from observed several low resolution(LR) images of the same scene. This method has proven to be useful in many practical cases where multiple frames of the same scene can be obtained, such as satellite imaging, video surveillance, video enhancement and restoration, digital mosaicking, and medical imaging. In this paper, we applied the super resolution reconstruction method in spatial domain to video sequences. Test images are adjacently sampled images from continuous video sequences and are overlapped at high rate. We constructed the observation model between the HR images and LR images applied with the Maximum A Posteriori(MAP) reconstruction method which is one of the major methods in the super resolution grid construction. Based on the MAP method, we reconstructed high resolution images from low resolution images and compared the results with those from other known interpolation methods.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.4
• /
• pp.150-160
• /
• 2008

The present domestic underwater and ocean facilities management depends on analysis with the naked eye. This study performs quantitative analysis to improve conventional methods, analyze spatial situation of underwater facilities. This research is divided into two steps; underwater image distortion correction and image mosaic step. First, underwater image distortion correction step is for the production of underwater target, calculates the correction parameters, and then developed the method that convert the original image point to whose distortion is corrected. Second step is for the obtaining pipe images installed in the underwater, corrects the distortion, and then transforms a coordinates of the correction pipe image. After coordinate transformation, we make the mosaic image using the singularities. As a result, when we measure the distance between pipe and underwater ground and compare with calculation value on mosaic image, it is showed that RMSE is 0.3cm.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.1
• /
• pp.95-106
• /
• 2001

The aim of this study was to find out and confirm the project formulation, feasibility, scale and locations on the farmland development projects such as planned and ongoing tideland reclamation and irrigation facilities along the western coast of North Korea using satellite image data, Landsat TM, JERS OPS and SPOT PAN and aged maps. In order to apply to the study, remote sensing technologies such as geometric correction. digital mosaicking, image merging, linear extraction and land cover classification were studied. As the results of the study, the reclaimable tidal flats are recognized at about 178, 000 ha equivalent to 59% of announced 300, 000ha. and 16, 000 ha of completed, 17, 000 ha of ongoing project areas although 27, 000 ha were revealed to be completed during 1987-1993. Almost planned projects are appeared to be shortage of water supply due to their small watersheds, however, most projects are connected with 2000 mile canal system.