• Journal of the Korean Society for Heat Treatment
• /
• v.9 no.3
• /
• pp.198-204
• /
• 1996

This work was carried out in order to investigate the effect of grain size on martensitic transformation temperature and morphology of Fe-27%Ni-0.27%C alloy. The martensitic transformation temperature was raised with increasing the austenitizing temperature within the range from $750^{\circ}C$ to $1200^{\circ}C$, owing to the grain growth, vacancy concentration. It was observed that the larger was the austenite grain, the higher was the martensitic transformation temperature. The influence of the austenite grain size was similar to that of the austenitizing temperature. The morphology of martensite in Fe-27%Ni-0.27%C alloy changed from lath to lenticular with the variation of grain size. From the above results, it was concluded that the martensitic transformation temperature and morphology was mainly dependent upon the austenite grain size.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.40.1-40.1
• /
• 2013

We perform a set of N-body/SPH simulations of galaxy interactions between early- and late-type galaxies with the mass ratio of 2 to 1. We show that mass transfer during a fly by interaction (the closest approach distance ~50kpc) can cause the morphology transformation of an early-type galaxy to a late type. In our simulations, we vary the orbital parameters of the interactions and the cold gas fraction of the late-type galaxy to compare how the morphology transformation is affected by the amount of mass transfer and orbital angular momentum of cold gas accreted to the early type. We also include hot halo gas in the galaxy models and show the location of the tidal bridge can be influenced by the shock generated during the collision.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.116-119
• /
• 1999

The effects of secondary phase morphology and carbon content on the plastic deformation of 0.2C-1.5Si-1.5mn TRIP(TRansformed Induced Plasticity) steel have been investigated at various annealing and bainitic transformation temperatures. The morphology of ferrite and secondary phases was controlled by the annealing temperature and the distribution of secondary phase was controlled by the bainitic transformation temperature. The secondary phase contributed to elongation and/or UTS depending on the ferrite morphology which determined deformation mode simple elongation or rotation of secondary phase along the tensile direction In case of the sample containing the granular type retained austenite the elongation was improved as carbon stabilized the austenite phase. If the film-shape retained austenite in acicular ferrite was dominant however UTS was enhanced as the transformed martensite was hardened by carbon.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.856-859
• /
• 2006

In river with bar, the characteristics of its physical conditions have a close relationship with bar morphology. In this paper, a monitoring approach of bar transformation in the Han River Estuary is presented using RADARSAT/SAR Images. The estuary is divided into North and South Korea and its area is blocked by CCL(Civil Control Line). Satellite remote sensing, therefore, is uniquely suited to monitoring bar transformation. Based on SAR signatures for bars, bar transformation is investigated from 2000 to 2005, and monitoring of suspended-silt transportations from terrestrial runoff is tried to understand the morphology during the events of severe rain storm. SAR data did not reveal clearly the bar locations because of most of data acquisitions during high tides from 6.8 m to 9.0 m. Even though the problem, it could be said that in the estuary vegetated area and natural levees are developed well, but bars and shifted after an event like a flood. It is also showed that suspended solids such as silt transported through the estuary could contribute highly to a sedimentation environment around Incheon.

• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.188-191
• /
• 2007

The Han River is divided into North and South Korea by NLL(Northern Limit Line) and its area has been blocked by CCL(Civil Control Line) since the Korean War in 1950. Satellite remote sensing, therefore, is uniquely suited to monitoring bar transformation in the region. In river with bar, the characteristics of its physical conditions have a close relationship with bar morphology. In this paper, a monitoring approach of bar transformation in the Han River Estuary is presented using RADARSAT/SAR images from 2000 to 2005 and spatial patterns of bar morphology are presented. it could be said that in the estuary vegetated area and natural levees are developed well, but bars are shifted after an event like a flood. It is also showed that suspended solids such as silt transported through the estuary could contribute highly to a sedimentation environment around Incheon.

• Journal of the Korean Ceramic Society
• /
• v.11 no.4
• /
• pp.19-24
• /
• 1974

The study was investigated to confirm the morphology of crystal from xonotlite to wollastonite at elevated temperature by electron microscopy. Mixtures of slaked lime and powdered quartz with plenty water were oscillated continuously in an autoclave under the pressure of 25kg/$\textrm{cm}^2$ for 8 hours to obtain well crystallized xonotlite. This milky slurry consisting of xonotlite was gained and dried in oven at 11$0^{\circ}C$. Examination of the electron micrograhs showed the xonotlite to be developed thin lath-like crystals and to be formed aggregate as chestnut bur. Details of the morphology suggest that the heat-treated xonotlite up to 100$0^{\circ}C$ splited and deformed slightly in agreement with the topotaxial transformation theory of xonotlite to wollastonite. The molded material endured in good shape under 120$0^{\circ}C$ except a little shrinkage.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1999.05a
• /
• pp.70-70
• /
• 1999

• Journal of the Korean Ceramic Society
• /
• v.29 no.5
• /
• pp.367-376
• /
• 1992

The powder characteristics of seeded alumina prepared from alkoxide by sol-gel method were studied. When ${\alpha}$-Al2O3 seeded powders used, these ${\alpha}$ phase transformation temperatures decreased than those of unseeded powders by 110$^{\circ}C$ and fine powders under 0.1 $\mu\textrm{m}$ could be obtained. When Fe-nitrate added powders used, fast transformation rate resulted from ionic effects of Fe3+, but hard aggregated morphology exhibited. When ${\alpha}$-Al2O3 and Fe nitrate simultaneously added, these powders represented lower transformation temperature but resulted in microstructure with aggregated particles.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 1995.04a
• /
• pp.60-63
• /
• 1995

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.5
• /
• pp.354-365
• /
• 2007

We present novel methods to generate a sequence of shapes that represents the pattern of morphological development or transformation of Bezier curves. The presented methods utilize the intrinsic geometric structures of a Bezier curve that are derived from rib and fan decomposition (RFD). Morphological development based on RFD shows a characteristic pattern of structural growth of a Bezier curve, which is the direct consequence of development path defined by fans. Morphological transformation based RFD utilizes development patterns of source and target curves to mimic the theory of evolutionary developmental biology: although the source and target curves are quite different in shapes, we can easily find similarities in their younger shapes, which makes it easier to set up feature correspondences for blending them. We also show that further controls on base transformation for intensity of feature blending, and extrapolation can compensate the immaturity of blended curves. We demonstrate the experimental results where transformation patterns are smoother and have unique geometric style that cannot be generated using conventional methods based on multi-linear blending.