• Clean Technology
• /
• v.21 no.1
• /
• pp.76-82
• /
• 2015

Volatile organic compounds (VOC) free adhesives have been interested by many scientists and engineers due to environmental regulations and the safety of industrial workers. In this work, a series of composites composed with bisphenol A epoxy resin used as solvent, dicyandiamide, and promoter were prepared to investigate the most appropriate molar ratio for steel-steel adhesion. The cured test specimen of each composite were measured with universal testing machine (UTM) to figure out mechanical properties such as tensile strength, Young’s modulus, and elongation. Furthermore, the lap shear strength of the specimen was tested with UTM while impact resistance was measured with Izod impact tester. The composite whose molar ratio of epoxy resin to curing agent is 1 : 0.9 (sample 3), showed better tensile strength, coefficient of elastic modulus, elongation, and impact strength than other composites did. The highest tanδ from dynamic mechanical analysis (DMA) was observed from sample 2 (epoxy resin: dicy = 1 : 0.7) while sample 3 showed slightly lower tanδ than that of 2. The morphology of the fracture surface of the cured composites from SEM showed that the number of subtle lines on the surface caused by impact increase as the contents of amine curing agent accrete. Furthermore, the viscosity change of sample 5 (epoxy resin: dicy = 1 : 1.3) was observed to confirm its storage stability.

• Korean journal of applied entomology
• /
• v.49 no.4
• /
• pp.277-287
• /
• 2010

Several species of the genus Aphidius are used in biological control programs against aphid pests throughout the world and their behavior and physiology are well studied. While the importance of sensory organs in their behavior is understood, their antennal structure remains largely unknown. In this study, the external morphology and distribution of the antennal sensilla on the antennal of both female and male adults of A. colemani were described using scanning electron microscopy (SEM). Generally, the filiform antennae of males ($l,515.2{\pm}116.5\;{\mu}m$) are longer than females ($l,275.1{\pm}103.4\;{\mu}m$). Antennae of this species are made up of radicle, scape, pedicel and flagellomeres. Male and female antennae differed in the total number of flagellomeres as 15 in males and 13 in females. The result of SEM observation was characterization and grouping of seven types of receptors into morphological classcs: Bohm bristles, Sensilla placodea, 2 types of S. coeloconica and S. trichodea, and S. basiconica as with a tip pore and with wall pores. In addition, the possible functions of the above sensilla types arc discussed in light of previously published literature; mechanoreception (Bohm bristles, S, coeloconica I & II and S. trichodea) and chemoreception (S. placodea, S. basiconica type I & II).

• Clinical and Experimental Reproductive Medicine
• /
• v.25 no.1
• /
• pp.87-92
• /
• 1998

This study was carried out to investigate in vitro/in vivo development of vitrified mouse oocytes. Mouse oocytes were vitrified using EFS30, 35 and 40 (30, 35 and 40% ethylene glycol, 18% ficoll and 0.5 M sucrose in M2 medium). After being exposed or vitrified-thawed, oocytes of normal morphology were inseminated in vitro by $1-2\times10^6/ml$ of epididymal sperm. The rates of fertilization, in vitro/in vivo development and cell number (inner cell mass and tropectoderm cell) of blastocysts in each treatment group were examined. The results obtained in these experiments were summarized as follows: The cleavage rates were obtained in EFS35 containing 35% ethylene glycol higher than in EFS30 and EFS40. The development rate of vitrified-thawed oocytes to two-cell stage after in vitro fertilization (51.1%) was significantly different compared to that of exposed to vitrification solution without cooling (60.0%) and control (68.2%) (p<0.05). However, there were no differences in the blastocyst formation from the cleaved embryos among groups (75.0, 73.3 and 80.0%). Also, the mean number of cells per blastocysts of vitrified group $(92.5{\pm}2.9)$ was similar to that of the exposed $(98.5{\pm}5.3)$ and control $(100.9{\pm}4.8)$. In vivo development of the blastocysts derived from vitrified-thawed oocytes resulted in fetal development (50.7%) and implantation rates (80.0%) which are very similar to those of control (58.2, 78.2%). These results suggest that mouse oocytes could be cryopreserved using vitrification solution (EFS35) based on ethylene glycol.

• Korean Journal of Plant Resources
• /
• v.15 no.2
• /
• pp.164-171
• /
• 2002

Morphological characteristics and growth pattern of 10 Polygonatum collections indigenous to Korea were examined to select the promising medicinal, edible resources and horticultural crops. Plant heights of I0 collections ranged from 15 to 102cm. Stem type was ascending or erect, and node numbers per a stem was 6.2 to 23.2. Phyllotaxis type was alternate or verticillate, and leaf shape was elliptical or linear. Leave numbers per a stem was 5.2 to 63.4, and bract types were classified into bracteate and nonbracteate. Flowers bloomed from May 7 to May 30, and flowering period was 5 to 13 days. Inflorescence types were classified into racemose, corymbose, and umbellate. Flower numbers per a stem was 1.5 to 125.2, and flower length was 13.1 to 30.2㎜. Perianth shapes were classified into tubular, constrict and urceolate. Surface colors of rhizome were pale yellow, pale brown, brown, and dark brown. As a result of this experiment, P. sibiricum, P. odoratum var. pluriflorum and P. odoratum var. thunbergii were thought to be useful as the medicinal and edible resources plants. On the other hand, P. odoratum var. pluriflorum 'Variegata', and P. odoratum var. maximowiczii, P. lasianthum. P. involucratum, P. desoulavyi, P. humile, and P. inflatum were thought to be useful as horticultural plants.

• The korean journal of orthodontics
• /
• v.34 no.5 s.106
• /
• pp.439-447
• /
• 2004

The purpose of this study was to investigate the influence of water, saliva and blood contamination on the bonding strength of metal brackets with a self-etching primer/adhesive to enamel. Ninety-six extracted human teeth were divided into four groups. The brackets were bonded to enamel with a self- etching primer (3M/Unitek Dental Products. Monorovia California) according to one of four protocols. The teeth were bonded in a dry condition (group D) or in contamination with distilled water (group W), artificial saliva (group S). or fresh human blood (group B) Shear bond strengths were tested using an Instron Universal testing machine. After debonding. bracket and tooth surfaces were examined with a stereomicroscope. In each group, four samples were selected and examined with a Scanning electron microscope of the prepared enamel surface and resin-enamel interlace. The results obtained were summarized as follows: Shear bond Strength if group D $(15.22{\pm}2.86MPa)$ and W $(15.20{\pm}3.85 MPa)$ Were higher than in group B$(12.56{\pm}2.94MPa)$ (p<0.05). There were no statistical differences in the shear bond strengths between groups D. W and S (p>0.05). There was a tendency to have less residual adhesive remaining on the enamel surfaces of group B than group D. The SEW morphology of group D and W showed a more roughened etching pattern than group S and B. Water or saliva contamination on bending of orthodontic brackets with Transbond plus self etching primer had almost no influence on bond strength In this study, the blood contaminated group showed the lowest bond strength, but it was above the clinically acceptable bond strength (5.9-7.8 MPa, Reynold, 1975). The results of this study suggest that acceptable clinical bond strengths can be obtained in wet conditions when self-etching adhesives are used.

• Journal of dental hygiene science
• /
• v.18 no.4
• /
• pp.218-226
• /
• 2018

The aim of this study was to compare fluoride release and surface changes according to different orthodontic bracket adhesives the application of fluoride products. We used non-fluoridated composite resin Transbond fluoridated composite resins Blugloo and LightBond, resin-modified glass ionomer Rely $X^{TM}$ Luting 2, and conventional glass ionomer Fuji $I^{(R)}$. Fluoride release of five orthodontic bracket adhesives and fluoride release ability after application of three fluoride products (1.23% acidulated phosphate fluoride gel, Tooth Mousse $Plus^{(R)}$, Fluor Protector, and a toothbrush with sodium fluoride-containing toothpaste) were measured using a fluoride electrode that was connected to an ion analyzer. After 4 weeks of fluoride application, the surface roughness and surface morphology were examined using a surface roughness tester and field emission scanning electron microscopy. The amounts of fluoride release were observed not only on application of Tooth Mousse $Plus^{(R)}$ and Fluor Protector on resin-modified glass ionomer Rely $X^{TM}$ Luting 2 and Fuji $I^{(R)}$, but also during tooth brushing using fluoride-containing toothpaste. After application of Tooth Mousse $Plus^{(R)}$, except Transbond XT, the surface roughness increased, and all orthodontic adhesives showed a partial drop of micro-particle filler. On application of 1.23% acidulated phosphate fluoride gel on all orthodontic bracket adhesives, their surface roughness increased. To bond the orthodontic bracket, resin-modified glass ionomer Rely $X^{TM}$ Luting 2 and Fuji $I^{(R)}$ adhesives are highly recommended if the amount of fluoride release is considered to confer a preventative effect on dental caries, and among the fluoride products, Tooth Mousse $Plus^{(R)}$ and Fluor Protector are better than 1.23% acidulated phosphate fluoride gel, and these are expected to prevent dental caries even during tooth brushing with fluoride-containing toothpaste.

• Journal of The Korean Astronomical Society
• /
• v.24 no.2
• /
• pp.217-271
• /
• 1991

We have observed dense core around young stellar objects, DR21, S140, Orion-KL, and L1551 using four millimeter-wave transitions of $HC_3N\;J$=4-3, J=5-4, J=10-9, and J=12-11. The spatial distribution of $HC_3N$ emission closely resembles the morphology of the previous CS observations that trace high density gas. These observations reveal the existence of $HC_3N$ dense cores around central IR source, elliptical in shape and almost perpendicular to the CO bipolar outflow axis. Small differences can be explained by that $HC_3N$ molecular line is more optically thin and is seen to be more detailed structure in the neighborhood of central IR sources. In S140 and Orion-KL, massive(${\sim}10\;M_{\odot}$), slowly rotating dense cores lie near at the central IR sources of bipolar outflows. The velocity channel maps of DR21 show that the bipolar outflow gas may have a correlation with the dense core of DR21. We analyzed intensities of the four lines to derive physical conditions in dense core from two methods, LTE and LVG. The column density of $HC_3N$, $N(HC_3N)$, between LTE and LVG calculations agree well with each other. The abundances of $HC_3N$ in each observing source have been estimated using the average values of $n(H_2)$ and $N(HC_3N)$ and assuming the size of dense core. The fractional $HC_3N$ abundances in massive dense cores of DR21, S140, and Orion-KL have a range of $(2-7){\times}10^{-10}$, while that of low mass dense core, L1551, has one order of magnitude greater value of $2{\times}10^{-9}$. This should be considered good agreement with the result by Morris et al.(1976). It may be considered that dense cores of DR21, S140, and Orion-KL may have almost same stage of chemical evolution, and their abundances have a small values relative to that of L1551. The column density $N(HC_3N)$ decreases with increasing distance from the densest part of the cloud, the central infrared source, and have the relation of $N(HC_3N){\varpropto}R^{\alpha}$, where a has a range of 0.65 to 0.89. The values of $n(H_2)$ are not varied with increasing distance from the dense core, and have almost same values. Therefore, it is considered that the dense cores in these regions probably consist of dense clumps in diffuse molecular gas medium, and $n(H_2)$ of each clump is ${\sim}10^5\;cm^{-3}$. Levels in the $T_{ex}$ increases with $n(H_2)$. It is considered that the $HC_3N$ dense cores are not completely thermalized. We examine the relationships between the luminosity of central infrared sources versus mass of the dense cores, and the luminosity of central infrared sources versus molecular hydrogen column density. Luminosities of the central IR sources show good correlation with mass and hydrogen column density of the dense core. Same has been found from CS observations. However, mass and size derived from $HC_3N$ observations are one order of magnitude smaller than those from CS. It can be interpreted that we see more central part of the cloud cores in $NC_3N$ lines than CS lines.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.4
• /
• pp.389-403
• /
• 2008

In Angle's Class III malocclusion, which has higher incidence in Korean than Western, depressed midfacial profile with protruded lower lips and mandible may give rise to many functional, esthetic, psychological, social problems. Due to the different malocclusion incidence according to racial differences, many previous studies focused on the relationship between Class II malocclusion and nasal airway obstruction. Previous studies used lateral cephalography which has limitations of 2 dimensional image with projection error and identification error. Therefore, the purpose of this study was to analyze morphologic differences in the nasal airway between normal occlusion and Angle's Class III malocclusion patients using 3-dimensional facial computed tomography. Thirteen normal occlusion(7 men and 6 women) and sixteen skeletal Class III(7 men and 9 women) patients were selected and 3-dimensional facial computed tomography taking was performed. Comparison between two group in volume and sectional area of nasal airway were carried out. The results were followed. 1. In the comparison of absolute nasal airway volume, oropharyngeal space of experimental group were larger than control group but there are no significant difference in other. 2. In the comparison of relative nasal airway volume, oropharyngeal space of experimental group were larger than control group but there are no significant difference in other. 3. In the oropharyngeal space width on frontal and lateral view, the similar tendency was revealed between two groups. 4. In the lateral curvature of nasal airway, the similar tendency was revealed between two groups.

• Clinical and Experimental Reproductive Medicine
• /
• v.24 no.3
• /
• pp.311-318
• /
• 1997

Bypassing acrosome reaction and fusion process in intracytoplasmic sperm injection(ICSI), most of injected spermatozoa still contain intact acrosome contents and plasma membrane. It Is not known yet what acrosome contents and plasma membrane of spermatozoa have effect on the development of embryo. For further understanding of fertilization process after ICSI, we studied the time of pronucleus formation, disappearance and first cleavage in human zygote, and pregnancy rate in relation to acrosome reaction rate of spermatozoa after ICSI. Seventy cycles undergoing ICSI program were randomly selected. Sperm suspension from 38 cycles were treated 50% human follicular fluid(hFF) for 3 hours in order to induce acrosome reaction, others were not treated as control. Acrosome reaction in hFF treated and non-treated group was assessed by fluorescein isothiocyanate(FITC)-conjugated Arachis hypogea(PNA) and Pisum sativum agglutinin(PSA). Oocytes were classified into 'good' and 'poor' according to their morphology. After ICSI, fertilization of oocytes were assessed by detection of two pronuclei at 16 hours. The pronuclei disappearance and first cleavage of zygotes were observed at 24 hours, and then embryos were transferred to uterus after culture for 72 hours. The rate of acrosome reaction of spermatozoa in hFF treated group was significantly higher than that in control(p<0.01). Fertilization rates of good oocytes were not different both control and hFF treated group(81.3%(174/206) vs. 72.1%(102/130)). But, in poor oocytes, the fertilization rates in hFF treated group(72.1%(149/183)) were increased compared than those of control group (63.6%(98/140), p<0.01). In either good or poor oocytes, the rates of pronuclei disappearance in hFF treated-spermatozoa injected oocytes were higher than control (59.1%(103/174), 56.4%(84/149) vs. 32.4%(33/102), 37.8%(37/98), p<0.01). Also, the rates of thirst cleavage were increased in hFF treated group (31%(54/174), 24.1%(36/149)) compared than those of control group (10.8%(11/102), 13.2%(13/98), p<0.01). The pregnancy rates of hFF treated group (42.1%(16/38)) were slightly higher than control group (28.1%(9/32), p>0.05). But, the pregnancy rate of group which possessed more than one cleavaged zygote at 24 hours was higher than group which did not (45.2%(19/42) vs. 21.4%(6/28), p<0.05). From these results, the development of zygotes were faster in higher acrosome reacted sperm group than lower acrosome reacted sperm group after ICSI. Our results may be explained that acrosomal membrane and plasma membrane are easily detached from spermatozoa in acrosome reacted spermatozoa compared with acrosome intact sperm in the cytoplasm of oocyte during pronuclear formation. We conclude that the injection of acrosome reacted spermatozoa will increase the pregnancy rate as they can induce fast embryonic development in ICSI.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2003.04a
• /
• pp.61-62
• /
• 2003

Clonal propagation of high-value forest trees through somatic embryogenesis (SE) has the potential to rapidly capture the benefits of breeding or genetic engineering programs and to improve raw material uniformity and quality. A major barrier to the commercialization of this technology is the low quality of the resulting embryos. Several factors limit commercialization of SE for Corsican pine, including low initiation rates, low culture survival, culture decline causing low or no embryo production, and inability of somatic embryos to fully mature, resulting in low germination and reduced vigour of somatic seedlings. The objective was to develop a Corsican pine maturation medium that would produce cotyledonary embryos capable of germination. Treatments were arranged in a completely randomized design. Data were analyzed by analysis of variance, and significant differences between treatments determined by multiple range test at P=0.05. Corsican pine (Pinus nigra var. maritima) cultures were initiated on modified !P6 medium. Modifications of the same media were used for culture multiplication and maintenance. Embryogenic cultures were maintained on the same medium semi solidified with 2.5 g/l Gelrite. A maturation medium, capable of promoting the development of Corsican pine somatic embryos that can germinate, is a combination of iP6 modified salts, 2% maltose, 13% polyethylene glycol (PEG), 5 mg!l abscisic acid (ABA), and 2.5 g/l Gelrite. After initiation and once enough tissue developed they were grown in liquid medium. Embryogenic cell suspensions were established by adding 0.951.05 g of 10- to 14-day-old semisolid-grown embryogenic tissue to 9 ml of liquid maintenance media in a 250ml Erlenmeyer flask. Cultures were then incubated in the dark at 2022$^{\circ}$C and rotated at 120 rpm. After 2.53 months on maturation medium, somatic embryos were selected that exhibited normal embryo shape. Ten embryos were placed horizontally on 20 ml of either germination medium ($\frac{2}{1}$strength Murashige and Skoog (1962) salts with 2.5 g/l activated charcoal) or same medium with copper sulphate adjusted to 0.25 mg/1 to compensate for copper adsorption by activated carbon. 2% and 4% maltose was substituted by 7.5% and 13% PEG respectively to improve the yield of the embryos. Substitution of' maltose with PEG was clearly beneficial to embryo development. When 2% of the maltose was replaced with 7.5% PEG, many embryos developed to large bullet-shaped embryos. At latter stages of development most embryos callused and stopped development. A few short, barrel-shaped cotyledonary embryos formed that were covered by callus on the sides and base. When 4% of the maltose was removed and substituted with 13% PEG, the embryos developed further, emerging from the callus and increasing yield slightly. Microscopic examination of the cultures showed differing morphologies, varying from mostly single cells or clumps to well-formed somatic embryos that resembled early zygotic embryos only liquid cultures with organized early-stag. A procedure for converting and acclimating germinants to growth in soil and greenhouse conditions is also tested. Seedling conversion and growth were highly related to the quality of the germinant at the time of planting. Germinants with larger shoots, longer, straighter hypocotyls and longer roots performed best. When mature zygotic embryos germinate the root emerges, before or coincident with the shoot. In contrast, somatic embryos germinate in reverse sequence, with the cotyledons greening first, then shoot emergence and then, much later, if at all, the appearance of the root. Somatic seedlings, produced from the maturation medium, showed 100% survival when planted in a field setting. Somatic seedlings showed normal yearly growth relative to standard seedlings from natural seed.