• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.12 s.138
• /
• pp.1625-1631
• /
• 2004

The purpose of this study was to investigate dyeing properties of cotton fabrics by American fleabane extract. Effect of dyeing condition on dye uptake and effect of mordanting on dye uptake, color change and colorfastness were explored. Its affinity to cotton fiber was considerably lower than wool, and its hydrogen bonding was involved in the absorption of American fleabane colorants to cotton fiber. K/S value of pre­mordanting was higher than sim-mordanting or post-mordanting. Except that Sn mordanted showed high K/S value, it did not significantly increase. American fleabane produced mainly yellowish color on mordants and mordanting method. Cotton fabrics showed generally high colorfastness except colorfastness to washing.

• Fashion & Textile Research Journal
• /
• v.20 no.3
• /
• pp.323-330
• /
• 2018

This study aim is to provide new coloration method by laccase-catalyzation on natural phenolic dyeing process. In this study, silk was dyed with black tea, which is one of polyphenolic dye, extracted in distilled water. The dyed samples were catalyzed by laccase as the eco-friendly mordanting process. To optimize the conditions of laccase-catalyzed coloration, conditions were varied by different mordanting methods (one-bath, two-bath), temperature and treatment time. The dye affinity in terms of the value of K/S, $L^*$, $a^*$, $b^*$, and H, V, C was measured by Computer Color Matching System (CCM, CM-2600d, Spectra Magic NX, Korea). The effect of laccase-catalyzed coloration on washing fastness was evaluated and compared with the synthetic mordant (Al, Cu, and Fe). As the result of color analysis of dyed silk, the optimum conditions of laccase-catalyzed coloration were determined to post-mordanting by one-bath at $50^{\circ}C$ for 3 hours. Under the optimum laccase-catalyzed conditions, the dyed silk was shown the color of yellowish-red. After laccase-catalyzed coloration on the dyed silk, the improvement of washing fastness was obtained compared with mordanted silk by synthetic mordant (Al, Cu, and Fe). Therefore, the present study was demonstrated that the effective enzymatic mordanting method by laccase for phenolic natural dyeing with vivid color and good fastness.

• Journal of the Korean Home Economics Association
• /
• v.43 no.8 s.210
• /
• pp.1-12
• /
• 2005

Ash solutions derived from vegetation have been known for their good mordanting action. They are used as finishing agents because they are able to promote dye uptake. It is expected that the types of ash solutions may have been different worker by worker since the workers have employed easy-to-get plants, when we reviewed old literature. However, the ash solutions are being used without clear distinctions between their characteristics. In this study, camellia ash solution and rice straw ash solution were prepared according to traditional methods. Using these solutions as mordanting agents, natural dyeing experiments with Caesdpinia Sappan were peformed. Following the dyeing procedure, the effect of the type of ash solution on the color of the dyed fabric was evaluated. The results showed that the ash solution mordanting effect us not dependent upon the components of the ash solution. It was also demonstrated that the mordanting effect was not based on the action of the metallic ions in the ash solution. The pH values of the ash solutions were adjusted in order to investigate the effect of changes in ash solution alkalinity on the dyeing process. The pH values ranged from neutral or weak acidity to the alkaline range in order to evaluate the characteristics of the mordanting tv the ash solutions.

• Journal of Fashion Business
• /
• v.12 no.6
• /
• pp.61-72
• /
• 2008

The UV-protection effect of green-tea dyed fabrics was reported in our previous studies. The chitosan was used as a natural mordant of cellulose fiber for green tea extract because chitosan is a natural bio-polymer. The increase in the UV protection property of summer cellulose fabrics, cotton and linen, upon the repetition of chitosan mordanting and green tea dyeing was observed. However, the physical property change would be followed by this repeated wet processing of the cellulose fabric. Therefore, the physical changes of the chitosan mordanted and green tea dyed cotton and linen fabrics were evaluated by KES-FB system. Tensile, shear, bending, compression, and surface characteristics were tested upon the repetition of mordanting and dyeing treatments. Linearity of tensile force increased in the treated cotton and linen samples. Tensile energy and resilience decreased in all treated fabrics. Shear stiffness increased in the treated cotton and linen in general. Shear hysteresis was increased in all cotton samples and some linen samples. In cotton, the bending rigidity in all treated cottons increased except C3G3. As the chitosan mordanting numbers increased, the bending rigidity tended to decrease. In linen, the bending rigidity and hysteresis increased in all treated samples. Compressional energy and resilience increased as the number of chitosan mordanting increased both in cotton and linen. This could be the result of the increase in thickness upon chitosan mordanting. Surface coefficient of friction increased in the treated cotton and linen in general. Surface roughness tended to increase in cotton.

• Journal of Fashion Business
• /
• v.7 no.5
• /
• pp.83-100
• /
• 2003

It has been known that the chitosan pre-treated fabrics can be dyed without the aid of mordanting process. It is due to the fact that chitosan treatment increases the dye uptake. However, the effect of chitosan on the dyeing mechanism has not been elucidated thus far. Following explanations have been presented regrading the action of the chitosan on the dyeing mechanisms: 1. Chitosan absorbs dyestuffs and facilitates dyeing since the chitosan itself has a good affinity toward dyestuffs. 2. Chitosan acts as a metallic mordant between the fiber molecule and dyestuff. 3. Fiber molecules and chitosan form a coordinate covalent bond. This study aims the quantitative investigation on the effect of the chitosan and the effect of sequence of the mordanting, pre-mordanting or post-mordanting, on the dyeing of the fabrics. Cotton fabrics and acylic fabrics were pre-treated with chitosan before dyeing with cochineal dyestuffs. Method 1: Fabrics were, firstly, mordanted with Al, Sn, Cu, and Fe; mordanted fabrics were, secondly, treated with chitosan; mordanted and chitosan-treated fabrics were, thirdly, dyed. Method 2: Fabrics were, firstly, treated with chitosan; chitosan-treated fabrics were, secondly, mordanted with Al, Sn, Cu, and Fe; these were dyed then. Method 2 gave distinguished specific color development with darker shade. Apart from this, chitosan-treated fabrics yielded darker shade compared to the pre-mordanted fabrics without chitosan-treatment.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.23 no.1
• /
• pp.103-111
• /
• 2021

The purpose of this study is to investigate the antibacterial efficacy of cotton and silk/rayon fabrics dyed with Saururus chinensis extract against antibiotic-resistant strains. The concentration of the concentrated dye in the Saururus chinensis extracts was 1.1% (o.w.f), and the liquor ratio was 1:10 at 30-70℃. The mordanting method was a post mordanting method. The concentration of Al2(SO4)3, CuSO4 5H2O and FeSO4 and7H2O mordant was 5% (o.w.f), and the liquor ratio was 1:40. In order to assess the antimicrobial activity of naturally dyed fabrics, Methicillin-resistant Staphylococcus aureus (MRSA) ATCC 33591, was used by incubating it in Brain Heart Infusion Agar (BHA) including Oxacillin (2㎍/ml) and Fungizone (2.5㎍/ml) and Brain Heart Infusion broth (BHI; Detroit, MI, USA.) The investigation of the reduction of the rate of antibiotic-resistant strains to dyed cotton fabrics and silk/rayon fabrics revealed that Cu mordanting fabric has the highest antimicrobial effects, with the rate of 99.7%, and Fe mordanting fabric has the lowest, with 77.7%. Non-mordant cotton fabrics also show a high reduction rate of strains (94.6%). In the case of dyed silk/rayon fabrics, it indicates a high reduction in the rate of strains in all fabrics with non-mordant treatment (94.2%), Al mordanting (99.6%), and Cu and Fe mordanting(99.9%).

• Korean Journal of Plant Resources
• /
• v.18 no.1
• /
• pp.186-193
• /
• 2005

This study was conducted to clarify the effects of different natural mordants and mordanting methods on the dyeing degree of silk using extracts from Coreopsis drummondii. Surface colors were shown as an order of descent Y in control, and an order of descent Y and YR treated by mordants. Extracts from Coreopsis drummondii was sufficient for the natural dyestuffs. $10\%,\;20\%\;and\;30\%$ mordants made from lime-juice of Camellia japonica, oyster shells. and Symplocos chinensis (Lour) Druce for. pilosa (Nakai) Ohwi were used for the dyeing of silk. Surface color of silk was not affected by the concentration of mordants and mordanting methods, however, $20\%$ mordant was suitable for the dye coloring. It was shown that dye coloring concentrations were highly in the order of mordanting later > mordanting ahead > co-mordanting, and so on. Silks were naturally dyed by the extracts from Coreopsis drummondii, and twenty-nine kinds of natural mordants were treated and screened. Surface color of silk was shown as an order of descent YR treated by the mordants made from the lime-juice of Camellia japonica and Eurya japonica, and as an order of descent Y by the other mordants. By the treatment of natural mordants, concentrations of dye coloring were significantly increased compared with control (none-mordanting), and the potentials as a natural mordant for the effective dye coloring was sufficiently ascertained.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.2
• /
• pp.34-39
• /
• 2009

The traditional Korean hand-made papers (Hanji) were dyed with colorant extracted from flowers of Sophora japonica L.(pagoda tree), and the effect of various dyeing factors (mordant, mordanting method, pH of dyeing solution, etc.) on colors and K/S values of the dyed Hanji was investigated. Changing mordant affected the color of dyed Hanji. Mordanting with alum, copper acetate made the color of dyed Hanji more yellow, but dyed Hanji mordanted with $FeCl_2$ had dark olive color. The K/S value of the dyed Hanji mainly depended on the pH of the dyeing solution and mordanting method. It was found that sim-mordanting with alum was timesaving and effective dyeing method. The dyed Hanji sim-mordanted with alum had the highest K/S value at low pH (about 4).

• Journal of the Korean Home Economics Association
• /
• v.41 no.2
• /
• pp.107-121
• /
• 2003

This study was discussed the dyeing of wool and nylon fabrics with Chinese Scholar Tree extract. The extracts of Chinese Scholar Tree was prepared in the condition of heating at $95{\pm}5C$, for 1 hour and cooling to 40C. And then the extracts of color matter treate with vacuum concentration at $60{\pm}2^{\circ}C$, 30mmHg and dried with spray dryer. The dyeing of wool and nylon fabric in this experiment was also employed the mordant dyeing method such as pre-mordant, post-mordant and simultaneous mordant method. The mordanting agents used in this study were as followings ; aluminium potassium sulfate, copper(II) acetate monohydrate, chromium potassium sulfate$.$$7H_2O$, Tin(II) chloride dihydrate, iron(II)sulfate $7H_2O$. For an evaluation of the dyeing property of the mordanting agents, the pre-mordant method, the repeat dyeing and the fastness of the light, dry cleaning, washing and rubbing measured respectively. From the results of the dye absorption, the optimum dyeing condition of the wool and nylon fabrics with Chinese Scholar Tree extract is at 80C dyeing temperature for 60 minutes. The optimum concentration of mordanting agent is Al, Cr, Sn 1%, Fe, Cu 2% solution. In general, the fastness property of the dyed wool and nylon fabrics had a comparatively high grade.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.1
• /
• pp.124-132
• /
• 2002

Dyeing properties of silk fabric on gromwell roof colorants were studied for the effect of dyeing conditions, such as methanol ratio, colorants concentration, pH, temperature and time etc. on the dye uptake and effect of mordants and mordanting methods on color change and dye uptake. And various colorfastnesses of dyed fabrics were evaluated far practical use. Gromwell colorants showed high affinity to silk and its isotherm adsorption curve was Freundlich type close to Nernst type. Therefore, it is considered that hydrogen bonding and Van der Waals force were involved in the adsorption of cromwell colorants to silk fabric. Post-mordanting method gave higher K/S value than other methods, but it was not significantly different color values from unmordanted one. Gromwell colorants produced mainly R and RP color depending on mordants and mordanting method. Dyed fabrics showed high colorfastness irrespective of mordanting treatment. Light colorfastness was increased for repeatedly dyed and Fe mordanted dyed fabrics.