• 한국항해항만학회지
• /
• 제30권6호
• /
• pp.433-438
• /
• 2006

최근 지구온난화의 영향으로 지구가 불안정기에 접어들어 지구적 규모의 재해가 자주 발생하고 있는 가운데, 어떻게 하면 이러한 재해를 예방하고, 피해를 최소화 할 것인지에 대해 고려해 봐야 할 시점이다. 특히 거대지진에 의한 쓰나미의 발생을 경고하고 있는 상황이기 때문에 쓰나미에 의한 계류선박의 영향을 고려하는 것은 대단히 중요한 일이다. 또한 항내 계류선박의 장주기 동요에 동반하는 선체동요로 인하여 하역중지나 계류시설의 손상에 관한 문제가 보고되었다. 이러한 장주기 동요의 주요 발생 원인이 항내 장기주파와 계류선박의 고유주기가 일치하는 공진현상에 의한 것으로, 수조실험을 통해 공진현상의 계류선박에의 동요영향을 파악하였다. 그리고 쓰나미의 내습으로 인한 항만내 계류중인 선박의 거동에 대한 수치 시뮬레이션을 행하여 공진주기파를 고려한 선박운동에의 영향 및 계류하중을 실험적으로 평가한다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 춘계학술대회 및 창립 30주년 심포지엄(논문집)
• /
• pp.191-197
• /
• 2006

최근 지구온난화의 영향으로 지구가 불안정기에 접어들어 지구 규모의 재해가 자주 발생하고 있는 가운데, 어떻게 하면 이러한 재해를 예방하고, 피해를 최소화 할 것인지에 대해 고려해 봐야 할 시점이다. 한편 지진과 같은 재해는 확률론적 관점에서 보면 일정한 주기를 가지고 발생했던 것으로 알려져 있다. 최근 거대지진에 의한 쓰나미의 발생을 경고하고 있는 상황이기 때문에 쓰나미에 의한 계류선박의 영향을 고려하는 것은 대단히 중요한 일이다. 또한, 항내 계류선박의 장주기 동요에 동반하는 하역중지나 계류시설의 손상에 관한 문제가 보고되었다. 이러한 장주기 동요의 주요 발생 원인이 항내 장기주파와 계류선박의 고유주기가 일치하는 공진현상에 의한 것으로 알려져 있다. 본 논문에서는 쓰나미의 내습으로 인한 항만내 계류중인 선박의 거동에 대한 수치 시뮬레이션을 행하여, 쓰나미의 공진현상에 의한 선박운동에의 영향 및 계류하중을 실험적으로 평가한다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.889-901
• /
• 2021

The tension of cables and motion response significantly affect safety of an immersed tunnel element in the immersion process. To investigate those, a hydrodynamic scale-model test was carried out and the model experiments was conducted under wind, current and wave loads simultaneously. The immersion standby (the process that the position of the immersed tunnel element should be located before the immersion process) and immersion process conditions have been conducted and illustrated. At the immersion standby conditions, the maximum force of the cables and motion is much larger at the side of incoming wind, wave and current, the maximum force of Element-6 (6 cables directly tie on the element) is larger than for Pontoon-8 (8 cables tie on pontoon of the element), and the flexible connection can reduce the maximum force of the mooring cables and motion of element (i.e. sway is expecting to decrease approximate 40%). The maximum force of the mooring cables increases with the increase of current speed, wave height, and water depth. The motion of immersed tunnel element increases with increase of wave height and water depth, and the current speed had little effect on it. At the immersion process condition, the maximum force of the cables decrease with the increase of immersion depth, and dramatically increase with the increase of wave height (i.e. the tension of cable F4 of pontoons at wave height of 1.5 m (83.3t) is approximately four times that at wave height of 0.8 m). The current speed has no much effect on the maximum force of the cables. The weight has little effect on the maximum force of the mooring cables, and the maximum force of hoisting cables increase with the increase of weight. The maximum value of six-freedom motion amplitude of the immersed tunnel element decreases with the increase of immersion depth, increase with the increase of current speed and wave height (i.e. the roll motion at wave height of 1.5 m is two times that at wave height of 0.8 m). The weight has little effect on the maximum motion amplitude of the immersed tunnel element. The results are significant for the immersion safety of element in engineering practical construction process.

• Wind and Structures
• /
• 제18권3호
• /
• pp.267-279
• /
• 2014

Hydrodynamic analyses of classic and truss spar platforms for floating offshore wind turbines (FOWTs) were performed in the frequency domain, by considering coupling effects of the structure and its mooring system. Based on the Morison equation and Diffraction theory, different wave loads over various frequency ranges and underlying hydrodynamic equations were calculated. Then, Response Amplitude Operators (RAOs) of 6 DOF motions were obtained through the coupled hydrodynamic frequency domain analysis of classic and truss spar-type FOWTs. Truss spar platform had better heave motion performance and less weight than classic spar, while the hydrostatic stability did not show much difference between the two spar platforms.

• 복합신소재구조학회 논문집
• /
• 제5권1호
• /
• pp.1-8
• /
• 2014

Pultruded glass fiber reinforced polymeric plastic (PFRP) and FRP member manufactured by sheet molding compound (SMC) have superior mechanical and physical properties compared with those of conventional structural materials. Since FRP has an excellent corrosion-resistance and high specific strength and stiffness, the FRP material may be highly appreciated for the development of floating-type photovoltaic (PV) power generation system. In this paper, advanced floating PV generation system made of PFRP and SMC is designed. In the design, it includes tracking solar altitude by tilting photovoltaic arrays and tracking solar azimuth by spinning structures. Moreover, the results of the finite element analysis (FEA) are presented to confirm stability of entire structure under the external loads. Additionally, installation procedure and mooring systems in the Hap-Cheon Dam are discussed and the measurement of strain under the actual circumstances is conducted for assuring stability of actually installed structures. Finally, by comparison with allowable stress, appropriate safety of structure is confirmed to operate the system.

• 한국해양공학회지
• /
• 제11권1호
• /
• pp.65-73
• /
• 1997

본 연구는 부유식 파랑제어구조물의 계류방식을 말뚝계류식으로 하여 종래의 부유식 파랑제어구조물의 파랑제어기능을 보완하고, 친수성 구조물로 이용할 수 있는 다용도 구조물의 개발을 목표로 하고 있다. 본 연구에서는 부유체의 계류장치에 초기반력을 작용시킴으로써 발생하는 파랑제어 효과의 개선과 부유체의 동요제어 효과를 수치계산법을 통하여 논의하였다. 이 때 계류부에서 발생하는 비선형 마찰력을 선형모델화하는 이론을 전개한 다음 수치계산 및 실험값을 통하여 본 수치모델의 적용성에 관하여 논의한 결과 양호한 일치성을 보였다. 또한, 파랑제어 효과 및 부유체의 동요저감 효과를 동시에 만족할 수 있는 초기반력에 관하여 논의하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.47-52
• /
• 2006

Recent warnings indicate that there is a potential risk of massive earthquake in Japan within 30 years. These earthquakes could produce large-scale tsunamis. Tsunamis are very powerful and can be traveled thousands of miles and caused damage in many countries. Consideration of the effect of tsunami to the moored ship is very important because it brings the loss of life and vast property damage. In this paper, the numerical simulation procedure to analyze the motions of a moored ship due to the observed waves of tsunami, Tokachi-off earthquake tsunami profile in northern Pacific coasts of Japan on September 26 in 2003. And the effects on the motions and mooring loads are investigated by numerical simulation. Numerical simulations consist of hydrodynamic analyses in a frequency domain and ship motion analyses in a time domain as the motions of moored ships are examined. As the process begins, the hydrodynamic and waveexciting forces for moored ships must be calculated. Ship motions and mooring forces can then be calculated by solving the equations of motion. In order to investigate the safety evaluation on the motions of moored ship by tsunami attack, we applied a numerical simulation procedure to a 135,000m3 LNG carrier moored at an offshore sea berth.

• Coupled systems mechanics
• /
• 제2권3호
• /
• pp.231-253
• /
• 2013

The impact of spar-nacelle-blade coupling on edgewise dynamic responses of spar-type floating wind turbines (S-FOWT) is investigated in this paper. Currently, this coupling is not considered explicitly by researchers. First of all, a coupled model of edgewise vibration of the S-FOWT considering the aerodynamic properties of the blade, variable mass and stiffness per unit length, gravity, the interactions among the blades, nacelle, spar and mooring system, the hydrodynamic effects, the restoring moment and the buoyancy force is proposed. The aerodynamic loads are combined of a steady wind (including the wind shear) and turbulence. Each blade is modeled as a cantilever beam vibrating in its fundamental mode. The mooring cables are modeled using an extended quasi-static method. The hydrodynamic effects calculated by using Morison's equation and strip theory consist of added mass, fluid inertia and viscous drag forces. The random sea state is simulated by superimposing a number of linear regular waves. The model shows that the vibration of the blades, nacelle, tower, and spar are coupled in all degrees of freedom and in all inertial, dissipative and elastic components. An uncoupled model of the S-FOWT is then formulated in which the blades and the nacelle are not coupled with the spar vibration. A 5MW S-FOWT is analyzed by using the two proposed models. In the no-wave sea, the coupling is found to contribute to spar responses only. When the wave loading is considered, the coupling is significant for the responses of both the nacelle and the spar.

• 대한조선학회논문집
• /
• 제31권1호
• /
• pp.22-31
• /
• 1994

해양 공간에 설치되어 유체의 흐름과 지형에 변화를 주며, 대상 수산 생물의 유집에 의한 생산 어장의 조성과 치어의 보호 육성을 도모하는 중효한 어장 시설인 인공어초의 기술 개발은 점차 다양화되어지고 있다. 부체부와 계류부로 구성되어 있는 부어초의 개발에 있어서는 부어초의 특성 및 안전상 계류시스템의 설계가 극히 중요한 부분이 된다. 이 논문에서는 부어초의 계류시스템에 많이 사용되어지는 나일론, 폴리에스터와 폴리에틸렌으로 이루어진 인조섬유로우프의 정적시험의 과정과 그 결과로서의 Creep거동 및 하중-인장 곡선을 얻었다. 특히 나일론 로우프의 경우 수중에서 20%내외의 강도 하락(Strength drop)이 관찰되며, Creep 시험 곡선은 대수시간 축(longerithmic time axis)상에서 직선을 유지하고, Flessner's formula와 평행한 결과를 얻었다.

• Ocean Systems Engineering
• /
• 제10권4호
• /
• pp.399-414
• /
• 2020

A floating bridge is an innovative solution for deep-water and long-distance crossing. This paper presents a curved floating bridge's dynamic behaviors under the wind, wave, and current loads. Since the present curved bridge need not have mooring lines, its deep-water application can be more straightforward than conventional straight floating bridges with mooring lines. We solve the coupled interaction among the bridge girders, pontoons, and columns in the time-domain and to consider various load combinations to evaluate each force's contribution to overall dynamic responses. Discrete pontoons are uniformly spaced, and the pontoon's hydrodynamic coefficients and excitation forces are computed in the frequency domain by using the potential-theory-based 3D diffraction/radiation program. In the successive time-domain simulation, the Cummins equation is used for solving the pontoon's dynamics, and the bridge girders and columns are modeled by the beam theory and finite element formulation. Then, all the components are fully coupled to solve the fully-coupled equation of motion. Subsequently, the wet natural frequencies for various bending modes are identified. Then, the time histories and spectra of the girder's dynamic responses are presented and systematically analyzed. The second-order difference-frequency wave force and slowly-varying wind force may significantly affect the girder's lateral responses through resonance if the bridge's lateral bending stiffness is not sufficient. On the other hand, the first-order wave-frequency forces play a crucial role in the vertical responses.