• 수산해양기술연구
• /
• 제46권1호
• /
• pp.20-31
• /
• 2010

In this research, the submersible fish cage was designed to avoid structural and biological damage during harsh sea conditions. The submersible cage system consists of netting, mooring ropes, a floating collar, floats, sinkers and anchors. Whole elements of the cage were modeled on the mass-spring model. The computer simulations were carried out to investigate the dynamic behavior of the cage and to calculate mooring line tension subjected to tidal currents and waves. As expected, the tension values in the mooring line of the submerged position are 36% less compared to that of the surface cage under the same loading conditions. As the wave was used in combination with the current velocity of 1m/s, the average tensile load for the submerged cage showed 85% of the value for the floating cage. The simulation results provide an improved understanding of the behaviors of the structure and valuable information on the optimized design of the cage system exposed to open ocean environmental factors.

• 대한조선학회논문집
• /
• 제47권4호
• /
• pp.580-588
• /
• 2010

OPB(out-of-plane bending)-induced failure of mooring chain was firstly addressed by CALM (catenary anchor leg mooring)-type offloading buoy, located approximately one mile away from the bow of the Girassol FPSO which was installed offshore area of Angola in September 2001. This study deals with verifying the load transfer mechanism between the first free chain link and connected two chain links inside the chain hawse. OPB moment to angle variation relationships are proposed by extensive parametric study where the used design variables are static friction coefficients, proof test loads, nominal tension forces, chain link diameters, chain link grades and chain link types. The stress ranges due to OPB moments are obtained using nonlinear FEAs (finite element analyses). Final stress ranges are derived considering ones from IPT (in-plane tension) forces. Also a formula for OPB fatigue assessment is briefly introduced.

• 한국정보시스템학회지:정보시스템연구
• /
• 제27권2호
• /
• pp.221-245
• /
• 2018

Purpose This study aims to investigate the factors that influence switching intention of Smart Appliances. We focuses on Push-Pull-Mooring theory and status quo bias as factors related to switching behavior. Design/methodology/approach This study developed an model to explain the switching intention of Smart Appliances and conducted structural equation modeling with AMOS22.0. To test the proposed hypotheses, we collected 319 survey responses from smart appliances's users. Findings The results indicated that low usefulness and low ease of use had an effect on the switching intention of smart appliances. The results also indicated that attractiveness of the alternative and social norms had an effect on the switching intention of smart appliances. Lastly, The difference between the relation of push effect and switching intention and the relation of pull effect and switching intention was found to be due to the level of status quo bias. The academic and managerial implications were discussed based on the results of empirical analysis.

• 한국해안해양공학회지
• /
• 제14권3호
• /
• pp.232-239
• /
• 2002

본 논문에서는 조위변화에 따른 오탁방지막 계류라인의 거동을 조사하였다. 거동분석으로부터 안전율을 고려하여 팽팽하게 적정케이블의 길이를 정하면 수심이 하강하더라도 긴장측 케이블은 거의 일정한 장력을 유지하는 것을 알 수 있었다 그러나, 이완케이블의 기능은 상실되어 구조체 전체의 불안정성을 초래할 수도 있는 것을 알 수 있었다. 또한, 초기 직선긴장각이 계류거동에 미치는 영향을 조사해봄으로써 케이블 장력, 수중부상길이 케이블길이(재료량과 관계 있음)및 부체변위 등을 복합 고려하면서 계류 해석하여야만 적정한 설계를 할 필요가 있을 것으로 보였으며, 막체의 부착물로 인한 케이블의 장력은 줄어들어 재료손상은 일으키지 않으나 저면 앵글, Total scope 및 부체변위에 영향을 미쳐 구조물 전체의 불안정성을 초래할 수 있다는 것도 알 수 있었다.

• 한국해안해양공학회지
• /
• 제3권2호
• /
• pp.92-99
• /
• 1991

해상에 계류된 부유체는 입사하는 파도에 의해 선형항인 파랑하중과 함께 2차항인 표류력을 받는다. 2차항의 표류력은 자유표면조건의 비선형성에 의해 서로 유사한 주파수를 갖는 2개의 선형 성분파간의 상호작용으로 발생하는 장주기 성분을 포함하고 있다. 대개의 계류계의 수평 인장력은 관성력항에 비해 아주 작은 양이고, 따라서 계류계의 설치로 나타나는 부유체의 수평운동 고유주기는 장주기이므로 때로는 공진이 일어나게 된다. 이렇게 야기된 대진폭운동은 작업조건을 악화시키는 것은 물론 계류계에 심각한 손상을 줄 수 있다. 부유체의 계류계로 최근 관심을 모으고 있는 Turret 계류계의 설계에도 이러한 장주기 표류력에 대한 고려와 함께 풍향성이 있는(weathervaning) 천이운동시 Roller Bearing에 걸리는 수평하중에 대한 해석이 필수적이다. 본 논문에서는 불규칙파중에 계류된 부유체에 작용하는 장주기 표류력을 2차 전달함수를 사용하여 계산한 뒤 장주기 표류력에 의한 전후동요를 시간기억 효과를 고려하여 시뮬레이션하였다. 계류계로는 분산된(spread) Turret형 계류계를 대상으로 하였으며 계류계의 수평인장계수를 매시간 단계마다 계산하는 방법으로 비선형성을 고려하였다.

• 한국해양공학회지
• /
• 제32권6호
• /
• pp.427-432
• /
• 2018

Tidal current power is one of the energy sources of the ocean. Electricity can be generated by converting the flow energy of the current into the rotational energy of a turbine. Unlike tidal barrage, tidal current power does not require dams, which have a severe environmental impact. A floating-type tidal current power device can reduce the expensive support and installation cost, which usually account for approximately 41% of the total cost. It can also be deployed in relatively deep water using tensioned wires. The dynamic behavior of a floater and turbine force are coupled because the thrust and moment of the turbine affect the floater excursion, and the motion of the floater can affect the incoming speed of the flow into the turbine. To maximize the power generation and stabilize the system, the coupled motion of the floater and turbine must be extensively analyzed. However, unlike pile-fixed devices, there have been few studies involving the motion analysis of a moored-type tidal current power device. In this study, the commercial program OrcaFlex 10.1a was used for a time domain motion analysis. In addition, in-house code was used for an iterative calculation to solve the coupled problems. As a result, it was found that the maximum mooring load of 200 kN and the floater excursion of 5.5 m were increased by the turbine effect. The load that occurred on the mooring system satisfied the safety factor of 1.67 suggested by API. The optimum mooring system for the floating tidal current power device was suggested to maximize the power generation and stability of the floater.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권3호
• /
• pp.1-12
• /
• 2021

이 논문의 목적은 말뚝식 계류시설의 지반-말뚝 및 잔교-크레인의 동적거동 특성을 파악하여 현행 응답스펙트럼 해석법의 적용성에 대해 연구하는 것이다. 이를 위하여 다양한 지반종류, 말뚝-지반 모델링과 구조물 고유주기 등을 설계변수로 Abaqus를 활용한 시간이력해석을 수행하고, 잔교-크레인의 다양한 연결조건과 구조물 고유주기 등을 변수로 시간이력해석을 수행하여 응답스펙트럼 해석결과와 비교 분석하였다. 연구 결과 말뚝식 계류시설의 지반-말뚝 및 잔교-크레인 동적거동 특성을 고려할 경우 현행 응답스펙트럼 해석법에 문제가 있으며 개선이 필요하다는 것을 확인하였다.

• 한국해양공학회지
• /
• 제37권6호
• /
• pp.273-281
• /
• 2023

Recently, offshore structures for eco-friendly energy, such as wind and solar power, have been developed to address the problem of insufficient land space; in the case of energy generation, they are designed on a considerable scale. Therefore, the scalability of offshore structures is crucial. The Korea Research Institute of Ships & Ocean Engineering (KRISO) developed multi-linked floating offshore structures composed of floating bodies and connection beams for floating photovoltaic systems. Large-scale floating photovoltaic systems are mainly designed in a manner that expands through the connection between modules and demonstrates a difference in structural response with connection conditions. A fluid-structure coupled analysis was performed for the multi-linked floating offshore structures. First, the wave load acting on the multi-linked offshore floating structures was calculated through wave load analysis for various wave load conditions. The response amplitude operators (RAOs) for the motions and structural response of the unit structure were calculated by performing finite element analysis. The effects of connection conditions were analyzed through comparative studies of RAOs and the response's maximum magnitude and occurrence location. Hence, comparing the cases of a hinge connection affecting heave and pitch motions and a fixed connection, the maximum bending stress of the structure decreased by approximately 2.5 times, while the mooring tension increased by approximately 20%, confirmed to be the largest change in bending stress and mooring tension compared to fixed connection. Therefore, the change in structural response according to connection condition makes it possible to design a higher structural safety of the structural member through the hinge connection in the construction of a large-scale multi-linked floating offshore structure for large-scale photovoltaic systems in which some unit structures are connected. However, considering the tension of the mooring line increases, a safety evaluation of the mooring line must be performed.

• 한국해양공학회지
• /
• 제11권4호
• /
• pp.205-212
• /
• 1997

The major subject of this paper is the conceptual design of a cable-buoy system based on mechanics of floating bodies and mooring lines. The goal is to present a systematic relevant analysis procedure for the conceptual design of oceanographic buoy systems. The dynamics of a free floating body with an anchoring line is studied and a model is proposed through the primary engineering.

• 대한조선학회논문집
• /
• 제43권5호
• /
• pp.560-567
• /
• 2006

FPSO and shuttle tanker are connected to each other by a mooring hawser and a loading hose through which cargo oil is off-loaded. Even in mild sea-state. environmental loads can cause unstable large drift motions between two vessels in tandem off-loading operations, which may result in collision incidents. Accordingly. the analysis on the relative motion between two vessels due to the environmental loads should be investigated in initial design stage. In this study, the low speed maneuvering equation is employed to simulate nonlinear motions of FPSO and shuttle tanker. Low frequency wave drift forces including hydrodynamic interactions between two vessels are evaluated by near field approaches. Current loads are determined by mathematical model of MMG and wind loads are calculated by employing the wind spectrum according to the guidelines of API-RP2A. Mooring forces produced by turret mooring lines and a flexible hawser are modeled quasi-statically by catenary equations. The effect of environmental loads that affect nonlinear motion is investigated through variation in their magnitudes and the nonlinear motions between FPSO and shuttle tanker are simulated under wave, current and wind in time domain.