• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.4
• /
• pp.356-361
• /
• 2008

The conventional drive system of SRM has a current sensor per each phase. The torque demand signal generated by the outer control loop is translated into individual current reference signal for each phase. The torque is controlled by regulating these currents. Using the SRM in a variable-speed control, the phase currents are generally regulated to achieve a square wave. The simplest form of current regulation uses fixed frequency delta modulation of the phase voltages. The aim of this paper is to regulate 3-phases current of SRM by only single current sensor using delta modulation with digital chip. In this paper, the asymmetric bridge converter which is able to control independently phases and be excited simultaneously is used as the driver system for 6/4 poles SRM. And the current sensor is replaced 3 sensors of each phase with only one on bus line of converter so as to detect current of every phase. The proposed delta modulation technique has been implemented in a simple digital logic circuit using EPLD(Electrically Programmable Logic Device). This method is verified through simulation and experiment results.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.1
• /
• pp.177-195
• /
• 2005

The purpose of this study was to analyze the kinematic variables of ankle joints and EMG signal of the lower limbs muscle activity for the different walking speed. The subjects were 6 males of twenties. It was classified into three different walking speed-0.75m/s, 1.25m/s, 1.75m/s. The walking performances were filmed by high speed video camera and EMG signal was gained by ME3000P8 Measurement Unit. Tibialis anterior(TA), Gastrocnemius medial head(GM), Gastrocnemius lateral head(GL), Ssoleus(SO) were selected for the dorsiflexion and plantarflexion of the ankle joint. The result of this study were as follows: 1. In the gait cycle, The time parameters for the phases were showed significant difference without the terminal stance phase and terminal swing phase for the different walking speed. 2. The angle of ankle joint was no significant difference for each time point and MDF, MPF but increasing walking speed the angle had the increasing pattern slightly. 3. The angular velocity of ankle joint was showed the significant difference for LHC, RTO, RKC, LHU, MPF and MDF point along the walking speed. 4. TA was showed about 2-3 times muscle activity at the 1.75m/s than 1.25m/s in some phases. And it was showed the similar muscle activity between the 0.75m/s and 1.25m/s but, showed a little much muscle activity in the 0.75m/s. GM was showed about 2-3 times muscle activity in the 1.75m/s than 1.25m/s, and even much muscle activity at the 0.75m/s than 1.25m/s in some phases. GL was showed increasing pattern of muscle activity specially in the initial swing phase as the walking speed increased. SO was showed about 3 times muscle activity in the 1.75m/s than 1.25m/s during the plantarflexion of ankle joint. It was showed the similar muscle activity between the 0.75m/s and 1.25m/s but, showed a little much muscle activity in the 1.25m/s.

• Journal of Powder Materials
• /
• v.16 no.2
• /
• pp.115-121
• /
• 2009

The effects of thermal treatment conditions on ADU (ammonium diuranate) prepared by SOL-GEL method, so-called GSP (Gel supported precipitation) process, were investigated for $UO_2$ kernel preparation. In this study, ADU compound particles were calcined to $UO_3$ particles in air and Ar atmospheres, and these $UO_3$ particles were reduced and sintered in 4%-$H_2$/Ar. During the thermal calcining treatment in air, ADU compound was slightly decomposed, and then converted to $UO_3$ phases at $500^{\circ}C$. At $600^{\circ}C$, the $U_3O_8$ phase appeared together with $UO_3$. After sintering of theses particles, the uranium oxide phases were reduced to a stoichiometric $UO_2$. As a result of the calcining treatment in Ar, more reduced-form of uranium oxide was observed than that treated in air atmosphere by XRD analysis. The final phases of these particles were estimated as a mixture of $U_3O_7$ and $U_4O_9$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.141-142
• /
• 2006

Thermoelectric properties and microstructures of $Sr_{8-x}Ba_xGA_{16}Ge_{30}$ alloys fabricated by the arc-melting method were investigated. The alloys with the nominal composition of $Sr_8Ga_{16}Ge_{30}$ and $Ba_8Ga_{16}Ge_{30}$ were the single-phase alloys, while those of $Sr_4Ba_4Ga_{16}Ge_{30}$ and $Sr_2Ba_6Ga_{16}Ge_{30}$ were two-phases alloys. Electrical resistivity and the Seebeck coefficient for both two-phases alloys were higher in magnitude than those of the single-phase alloys between room temperature and 873K The thermal conductivities for both two-phase alloys were reduced with respect to those of the single-phase alloys in the whole temperature range. The maximum values of ZT for $Sr_4Ba_4Ga_{16}Ge_{30}$ and $Sr_2Ba_6Ga_{16}Ge_{30}$ were achieved with the values of 0.69 at 753K and 0.51 at 754K, respectively, while those of $Sr_8Ga_{16}Ge_{30}$ and $Ba_8Ga_{16}Ge_{30}$ were 0.86 at 758K and 0.76 at 943K, respectively.

• Journal of the Korean Ceramic Society
• /
• v.48 no.5
• /
• pp.368-372
• /
• 2011

Aluminum nitride (AlN) has excellent thermal conductivity, whereas it has some disadvantage such as low sinterability. In this study, the effects of sintering additive content and sintering condition on thermal conductivity of pressureless sintered AlN ceramics were examined on the variables of 1~3 wt% sintering additive ($Y_2O_3$) content at $1900^{\circ}C$ in $N_2$ atmosphere with holding time of 2~10 h. All AlN specimens showed higher thermal conductivity as the $Y_2O_3$ content and holding time increase. The formation of secondary phases (yttrium aluminates) by reaction of $Y_2O_3$ and $Al_2O_3$ from AlN surface promoted the thermal conductivity of AlN specimens, because the secondary phases could reduce the oxygen contents in AlN lattice. Also, thermal conductivity was increased by long sintering time because of the uniform distribution and the elimination of the secondary phases at the grain boundary by the evaporation effect during long holding time. A carbothermal reduction reaction was also affected on the thermal conductivity. The thermal conductivity of AlN specimens sintered at $1900^{\circ}C$ for 10 h showed 130~200W/mK according to the content of sintering additive.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.2
• /
• pp.195-200
• /
• 2013

This study investigated the effects of water temperature, photoperiod and population density on oxygen consumption (OC) in the longtooth grouper (Epinephelus bruneus). OC rate in the longtooth grouper at 15, 20, and $25^{\circ}C$ were $85.9{\pm}6.9$, $107.5{\pm}10.1$, and $164.0{\pm}19.2\;mg\;O_2\;kg^{-1}\;h^{-1}$, respectively, indicating a linear increase in OC with water temperature. Photoperiod was regulated in accordance with the light (09:00-21:00 h, L) and dark (21:00-09:00 h, D) phases of the diel cycle (12L/12D), with a water temperature of 15, 20, or $25^{\circ}C$. OC rates during the light and dark phases were $83.8{\pm}5.4$, $88.1{\pm}7.8\;mg\;O_2\;kg^{-1}\;h^{-1}$, respectively, at $15^{\circ}C$ and $111.2{\pm}12.3$ and $103.7{\pm}5.7\;mg\;O_2\;kg^{-1}\;h^{-1}$ at $20^{\circ}C$. No significant differences were observed between the light and dark phases (P > 0.05). at $25^{\circ}C$ the OC rates were $168.8{\pm}24.3$ and $159.2{\pm}11.4\;mg\;O_2\;kg^{-1}\;h^{-1}$ during the light and dark phases, respectively, indicating that OC is higher during daylight than nighttime. OC tates at 55.4, 88.4, 118.8, and 145.1 g $L^{-1}$ were $252.0{\pm}11.6$, $219.0{\pm}8.7$, $206.7{\pm}11.4$, and $208.8{\pm}11.4\;mg\;O_2\;kg^{-1}\;h^{-1}$, respectively, indicating a decrease in OC with increasing population density. However, no significant difference was observed between the values for 118.8 g $L^{-1}$ and 145.1 g $L^{-1}$ (P > 0.05).

• Sleep Medicine and Psychophysiology
• /
• v.9 no.1
• /
• pp.61-67
• /
• 2002

Objectives: This study is aimed at measuring psychophysiological responses using a biofeedback system in healthy people to obtain basic normative data for biofeedback research and treatment. Methods: Ninety-six healthy volunteers (55 males and 41 females : average age $30.4{\pm}8.0$) without any history of major medical or psychiatric illnesses participated in this study. Psychophysiological responses were assessed using the ProComp+ and BioGraph program (ver. 2.1) with regard to forearm and frontal electromyography (EMG), electrodermal response (EDR), and skin temperature. They were measured in 3 phases (baseline, stress, and recovery phases), respectively. Beck depression inventory and Spielberger state and trait anxiety inventory were used to measure mood states. We compared psychophysiological responses according to age and gender differences, respectively and examined the relationship between mood states and psychophysiological measures. Results: People in their twenties showed higher EDR levels in the 3 phases than those of other age groups. Female subjects showed higher frontal EMG levels in the 3 phases compared with male subjects. There was no significant correlation between biofeedback measures and mood states in these subjects. Conclusion: We present normative data of psychophysiological responses measured by a biofeedback system in healthy people. These results suggest that gender and age should be considered as important variables in assessing psychophysiological responses using a biofeedback system.

• Tribology and Lubricants
• /
• v.35 no.3
• /
• pp.176-182
• /
• 2019

The primary objective of this study is to treat a monocrystalline silicon (Si) wafer having a thickness of $279{\mu}m$ by employing the ultrasonic nanocrystal surface modification (UNSM) technology for improving the efficiency and service life of nano-electromechanical systems (NEMSs) and micro-electromechanical systems (MEMSs) by enhancing of wear and corrosion resistances. The wear and corrosion resistances of the Si wafer were systematically investigated before and after UNSM treatment, wherein abrasive, oxidative and spalling wear mechanisms were applied to the as-received and subsequently UNSM-treated Si wafer. Compared to the asreceived state, the wear and corrosion resistances of the UNSM-treated Si wafer are found to be enhanced by about 23% and 14%, respectively. The enhancement in wear and corrosion resistances after UNSM treatment may be attributed to grain size refinement (confirmed by Raman spectroscopy) and modified surface integrity. Furthermore, it is observed that the Raman intensity reduced significantly after UNSM treatment, whereas neither the Raman shift nor new phases were found on the surface of the UNSM-treated Si wafer. In addition, the friction coefficient values of the as-received and UNSM-treated Si wafers are found to be about 0.54 and 0.39, respectively. Hence, UNSM technology can be effectively incorporated as an alternative mechanical surface treatment for NEMSs and MEMSs comprising Si wafers.

• Journal of Astronomy and Space Sciences
• /
• v.36 no.4
• /
• pp.293-306
• /
• 2019

In this study, the observational arc-length effect on orbit determination (OD) for the Korea Pathfinder Lunar Orbiter (KPLO) in the Earth-Moon Transfer phase was investigated. For the OD, we employed a sequential estimation using the extended Kalman filter and a fixed-point smoother. The mission periods, comprised between the perigee maneuvers (PM) and the lunar orbit insertion (LOI) maneuver in a 3.5 phasing loop of the KPLO, was the primary target. The total period was divided into three phases: launch-PM1, PM1-PM3, and PM3-LOI. The Doppler and range data obtained from three tracking stations [included in the deep space network (DSN) and Korea Deep Space Antenna (KDSA)] were utilized for the OD. Six arc-length cases (24 hrs, 48 hrs, 60 hrs, 3 days, 4 days, and 5 days) were considered for the arc-length effect investigation. In order to evaluate the OD accuracy, we analyzed the position uncertainties, the precision of orbit overlaps, and the position differences between true and estimated trajectories. The maximum performance of 3-day OD approach was observed in the case of stable flight dynamics operations and robust navigation capability. This study provides a guideline for the flight dynamics operations of the KPLO in the trans-lunar phase.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.111.1-111.1
• /
• 2011

The solar energy is dramatically increasing as the alternative energy source and the silicon(Si) solar cell are used the most. In this study, the improved process and equipment for the metallurgical refinement of multicrystalline Si were evaluated for the inexpensive solar cell. The planar plane and columnar dendrite aheadof the liquid-solid interface position caused the superior segregation of impurities from the Si. The solidification rate and thermal gradient determined the shape of dendrite in solidified Si matrix solidified by the directional solidification(DS) method. To simulate this equipment, the commercial software, PROCAST, was used to solve the solidification rate and thermal gradient. Si was vertically solidified by the DS system with Stober process and up-graded metallurgical grade or metallurgical grade Si was used as the feedstock. The inductively coupled plasma mass spectrometry (ICP) was used to measure the concentration of impurities in the refined Si ingot. According to the result of ICP and simulation, the high thermal gradient between the two phases wasable to increase the solidification rate under the identical level of refinement. Also, the separating heating zone equipped with the melting and solidification zone was effective to maintain the high thermal gradient during the solidification.