• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.3
• /
• pp.133-147
• /
• 2005

Various types of ray-tracing methods are used to predict the quantity measures of radiation illumination, the uniformity of illumination, radiation performance of LCD BLU(Hack-Light Unit). The uniformity of radiation illumination is one of the most important design factor of BLU and is usually controlled by the diffusive-ink pattern printed on the bottom of light-guide panel of BLU. Therefore it is desirable to produce an improved (ideally, the optimal) ink pattern to achieve the best uniformity of radiation illumination. In this paper, we applied the Welder-Mead simplex-search method among various direct search method to compute the optimal ink pattern. Direct search methods are widely used to optimize the functions which are often highly nonlinear, unpredictably discontinuous, and nondifferentiable, The ink-pattern controlling the uniformity of radiation illumination is one type of these functions. In this paper, we found that simplex search methods are well suited to computing the optimal diffusive-ink pattern. In extensive numerical testing, we have found the simplex search method to be reasonably efficient and reliable at computing the optimal diffusive-ink pattern. The result also suggests that optimization can improve the functionality of simulation tools which are used to design LCD BLU.

• Journal of radiological science and technology
• /
• v.39 no.1
• /
• pp.43-49
• /
• 2016

In this study, equivalent dose and LET (Linear Energy Transfer) calibration of CR-39 SSNTD (Solid State Nuclear Track Detector) were performed using 400 MeV/u C heavy ions in HIMAC (Heavy Ion Medical Accelerator in Chiba) for high LET radiation therapy. The irradiated CR-39 SSNDTs were etched according the etching condition of JAXA (Japan Aerospace Exploration Agency). And the etched SSNTDs were analyzed by using Image J. Determined frequency mean dose (${\bar{y_D}}$)and dose-mean lineal energy (${\bar{y_F}}$)of 400 MeV/u C are about 8.5keV/mm and 10.1 keV/mm, respectively by using the CR-39 SSNTD. This value is very similar to the results calculated by GEANT4 Monte Carlo simulation and measured with TEPC (Tissue Equivalent Proportional Counter) active radiation detector. We could determine the equivalent dose and LET calibration factors of CR-39. And we confirmed that the CR-39 SSNTD was useful for high LET radiation dosimetry in hadron radiotherapy.

• Journal of Korean Society of Transportation
• /
• v.26 no.4
• /
• pp.251-264
• /
• 2008

One of the crucial elements to fully facilitate the various benefits of intelligent transportation systems (ITS) is to obtain more reliable traffic monitoring in real time. To date, point and section-based traffic measurements have been available through existing surveillance technologies, such as loops and automatic vehicle identification (AVI) systems. However, seamless and more reliable traffic data are required for more effective traffic information provision and operations. Technology advancements including vehicle tracking and wireless communication enable the acceleration of the availability of individual vehicle travel information. This study presents a UBIquitous PRObe vehicle Surveillance System (UBIPROSS) using vehicle-to-vehicle (V2V) wireless communications. Seamless vehicle travel information, including origin-destination information, speed, travel times, and other data, can be obtained by the proposed UBIPROSS. A set of parameters associated with functional requirements of the UBIPROSS, which include the market penetration rate (MPR) of equipped vehicles, V2V communication range, and travel time update interval, are investigated by a Monte Carlo simulation- (MCS) based evaluation framework. In addition, this paper describes prototypical implementation. Field test results and identified technical issues are also discussed. It is expected that the proposed system would be an invaluable precursor to develop a next-generation traffic surveillance system.

• Journal of Food Hygiene and Safety
• /
• v.17 no.3
• /
• pp.137-145
• /
• 2002

Tributyltin compounds have been increasingly used in the form of plastic stabilizers, catalytic agents, industrial agricultural biocides, antifouling paint, and pesticides. Among these organotin compounds, large amounts of tributyltin(TBT) and triphenyltin(TPT) have been used as antifouling agents because they have a superior ability to prevent marine organism from being encrusted on ship bottoms and in culturing nets. Environmental pollution by these organotin compounds in the aquatic environment were undertaken. The international maritime Organization's established a provisional tolerable daily intake(TDI) of 1.6[micro]g TBTO/kg/ B.W. The Food and Agiculture Organization (of the United Nations)/world Health Organization's (FAO/WHO) proposed a TDI of 0.5ug TPT/kg BW/d. This study is conducted monitoring of TBT on seafoods in Korea and risk assessment for exposure on TBT in seafoods. Total hazard index(using Reference Dose : 0.3 ug TBTO/kg B.W/day) of intake exposure on seafoods is 0.04 as the 50th percentile, 0.08 as the 95th percentile. This value is estimated by Monte-Carlo simulation using Crystal Ball(Decisioneering Co., 2001).

• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.1942-1946
• /
• 2021

Gadolinium oxysulfide (GOS) is regarded as a novel scintillator for the realization of ultra-high spatial resolution in neutron imaging. Monte Carlo simulations of GOS scintillator show that the capability of its spatial resolution is towards the micron level. Through the time-of-flight method, the light output of a GOS scintillator was measured to be 217 photons per captured neutron, ~100 times lower than that of a ZnS/LiF:Ag scintillator. A detector prototype has been developed to evaluate the imaging solution with the GOS scintillator by neutron beam tests. The measured spatial resolution is ~36 ㎛ (28 line pairs/mm) at the modulation transfer function (MTF) of 10%, mainly limited by the low experimental collimation ratio of the beamline. The weak light output of the GOS scintillator requires an enormous increase in the neutron flux to reduce the exposure time for practical applications.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.6
• /
• pp.638-644
• /
• 2018

Relay systems have recently gained attentions because of its capability of cell coverage extension and the power gain as the one of key technologies for 5G. Relays can be exploited for small-cell base stations and the autonomous network, where communication devices communicate with each other cooperatively. Therefore, the relay technology is expected to enable the low power and large capacity communication. In order to maximize the benefits of using a limited number of relays, the efficient relay selection method is required. Especially, when two nodes exchange their data with each other via relay, the relay selection can maximize the average data rate by the spatial location of the relay. For this purpose, the average data rate is analyzed first according to the relay selection. In this paper, we analyzed the average data rate when two nodes exchange their data via dual-hop decode and forward relaying considering the interference by the concurrent transmission under Nakagami-m fading channel. The correctness of the analysis is verified by the Monte Carlo simulation. The results show that the concurrent transmission is superior to the non-concurrent transmission in the high required data rate region rather than in the low required data rate region.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.6
• /
• pp.611-619
• /
• 2018

The researches have only conducted regarding construction safety management and risk on interior construction site(workers) and is insufficient about the exterior construction site(third party). As a result, ordinary people who were near construction sites have injured and hold a negative view when they think about the construction industry because construction industry have been exposed to them having a high accidents rate through media. In addition, the importance of industrial disaster prevention is emphasized at this point in time, the overall safety management system should be constructed with considering construction site external(third human) for improving the negative image of the construction industry among ordinary people. Therefore, the objective of this study is to develop the quantification model of human accident utilizing the insurance claim payout occurred construction site exterior(third party). In the future, it can be used as a reference for developing the safety management checklist in construction site interior exterior and development for forecasting control system of human accident.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.11
• /
• pp.828-833
• /
• 2018

It is well known that reflected waves and resonance affect phase distortion. In addition, phase delay can be distorted by antenna impedance. In this study, we analyze the phase delay variation caused by the antenna impedance, considering mutual coupling effects. In addition, we confirm the beam steering characteristics. When was -10 dB and -7 dB, the maximum phase delay error was $18.5^{\circ}$ and $26.5^{\circ}$, respectively. The Monte Carlo simulation with an eight-element linear array antenna demonstrated that the RMS error of the beam steering angle ranged from $0.19^{\circ}$ to $0.4^{\circ}$, and the standard deviation ranged from $0.14^{\circ}$ to $0.33^{\circ}$ when the beam steering angle was in the range of $0^{\circ}$ to $30^{\circ}$, with the uniformly distributed phase error of $18.5^{\circ}$ and $26.5^{\circ}$. The side lobe level increased from 0.74 dB to 1.21 dB by the phase error from the theoretical value of -12.8 dB, with a standard deviation of 0.31 dB to 0.51 dB. This is verified by designing an eight-element spiral array antenna.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.9
• /
• pp.649-657
• /
• 2019

Hydrazine, which is used as a representative monopropellant, is an extremely poisonous substance and has a disadvantage that it is harmful to the human body and is very difficult to handle. In recent years, research on the development of non-toxic and environmentally friendly propellants has attracted much attention. Ammonium dinitramide(ADN) based propellant developed by Swedish Space Corporation has superior performance to hydrazine and has been commercialized through performance verification in space environment. On the other hand, the exhaust gas from a thruster nozzle collides with a satellite while it is spreading in the vacuum space, thermal load and surface contamination may occur and may reduce the performance and lifetime of the satellite. However, a study on the effect of the exhaust gas of the green propellant thruster on the satellite has not been conducted in earnest yet. Therefore, the exhaust gas behavior in space was analyzed in this study for the ADN based green monopropellant using Navier-Stokes equations and the DSMC method. As a result, it can be expected to be used as design validation data in the development of satellite when using the ADN based green monopropellant.

• Economic and Environmental Geology
• /
• v.52 no.3
• /
• pp.231-241
• /
• 2019

Kinematic analysis determines the stability of rock slope by analyzing the relationship between the slope face orientation and the discontinuity orientation. In this study, terrestrial LiDAR was used to obtain a large amount of discontinuity orientation data and then, the probabilistic characteristics of the orientation data obtained using terrestrial LiDAR were analyzed. Subsequently, the probabilistic kinematic analysis was carried out using the discontinuity orientations generated randomly from Fisher function in Monte Carlo simulation. In addition, the probabilistic kinematic analysis was also performed using the actual orientation data obtained from the terrestrial LiDAR to compare their results. Consequently, the results of both probabilistic analyses showed similar results. Therefore, if sufficient orientation data are provided by other means such as terrestrial LiDAR, the probabilistic analysis will show reasonable results using the actual field data without randomly generating orientation data. In addition, the deterministic kinematic analysis was also carried out using representative orientation of discontinuity sets. The analysis result of the probabilistic analysis showed similar results with the deterministic analysis because the dispersion of the discontinuity orientations in a joint set is not large.