• Nuclear Engineering and Technology
• /
• 제50권7호
• /
• pp.1024-1036
• /
• 2018

In this paper, McCARD code was verified using various models listed in the NUREG/CR-6361 benchmark guide, which provides specifications for single pin-cells, single assemblies, and the whole core classified depending on the nuclear properties and structural characteristics. McCARD code was verified by comparing its results with those of SCALE code for single pin-cell and single assembly benchmark problems. The difference in the multiplication factor obtained through the two codes did not exceed 90 pcm. The benchmark guide treats a total of 173 whole core experiments. The experiments are categorized as simple lattices, separator plates, reflecting walls, reflecting walls and separator plates, burnable absorber fuel rods, water holes, poison rods, and borated moderator. As a result of numerical simulation using McCARD, the mean value of the multiplication factors is 1.00223 and the standard deviation of the multiplication factors is 285 pcm. The difference between the multiplication factors and the experimental value is in the range of -665 pcm to + 1609 pcm. In addition, statistics of results for experiments categorized by reactor shape, additional structure, burnable poison, etc., are detailed in the main text.

• Structural Engineering and Mechanics
• /
• 제38권4호
• /
• pp.503-516
• /
• 2011

Uncertainty in concrete properties, including concrete modulus of elasticity and modulus of rupture, are predicted by developing a microstructural homogenization model. The homogenization model is developed by analyzing a concrete representative volume element (RVE) using the finite element (FE) method. The concrete RVE considers concrete as a three phase composite material including: cement paste, aggregate and interfacial transition zone (ITZ). The homogenization model allows for considering two sources of variability in concrete, randomly dispersed aggregates in the concrete matrix and uncertain mechanical properties of composite phases of concrete. Using the proposed homogenization technique, the uncertainty in concrete modulus of elasticity and modulus of rupture (described by numerical cumulative probability density function) are determined. Deflection uncertainty of reinforced concrete (RC) beams, propagated from uncertainties in concrete properties, is quantified using Monte Carlo (MC) simulation. Cracked plane frame analysis is used to account for tension stiffening in concrete. Concrete homogenization enables a unique opportunity to bridge the gap between concrete materials and structural modeling, which is necessary for realistic serviceability prediction.

• Journal of electromagnetic engineering and science
• /
• 제9권4호
• /
• pp.182-187
• /
• 2009

When we assign frequency resources to a new radio service, the existing services need not to be interfered with by the new service. Therefore, when we make a frequency assignment, a guard band is necessary to separate adjacent frequency bands so that both can transmit simultaneously without interfering with each other. In this paper, we propose an efficient frequency guard band decision rule for avoiding interference between radio services. The guard band is established based on the probability of interference in the previously arranged scenario. The interference probability is calculated using the spectrum engineering advanced Monte Carlo(MC) analysis tool(SEAMCAT). After applying the proposed algorithm to set up the frequency guard band, we can decide on the guard band appropriately because the result satisfies the predefined criterion.

• 전자공학회논문지D
• /
• 제36D권10호
• /
• pp.37-44
• /
• 1999

건식 식각 공정을 시뮬레이션하기 위하여, 플라즈마 챔버 내의 식각 이온 거동 메카니즘을 몬테카를로 수치해석 방식으로 구현하였고, 식각 이온의 거동에 의한 기판의 식각 형상을 확인하기 위하여 셀 방식의 표면 전진기를 개발하였다. 몬테카를로 수치 계산의 단점인 과다한 계산 시간을 효과적으로 감소시키기 위하여, CRAY T3E 병렬 컴퓨터와 여러대의 워크스테이션을 연결한 MPI 환경에서 몬테카를로 병렬 계산 알고리즘을 개발하였다. 본 연구에서 개발한 몬테카를로 병렬 계산 알고리즘은 95% 이상의 효율성을 보이며, 16개의 프로세서를 사용하였을 때 16의 스피드업(Speedup) 값을 얻었다. 또한 셀 방식의 병렬 연산 표면 전진기를 이용하여 토포그래피 시뮬레이션을 수행한 결과에서, 셀의 개수가 2갭만 개 일 때, 약 600Mb 이상의 메모리가 소요되므로 단일 워크스테이션 환경에서는 불가능한 계산이 본 연구에서 개발한 병렬 계산 알고리즘을 이용하였을 때 32개의 프로세서에서 15분의 계산시간이 소요되었다.

• Nuclear Engineering and Technology
• /
• 제55권11호
• /
• pp.4019-4025
• /
• 2023

Recently, a new monkey computational phantom, called Visible Monkey, was developed for non-ionizing radiation studies in animal research. In this study, we extended its applications to ionizing radiation studies by implementing the voxel model of the Visible Monkey into three general-purpose Monte Carlo (MC) codes: MCNP6, PHITS, and Geant4. The implementation work for MCNP and PHITS was conducted using the LATTICE, UNIVERSE, and FILL cards. The G4VNestedParameterisation class was used for Geant4. Then, organ dose coefficients (DCs) for idealized photon beams in the antero-posterior direction were calculated using the three codes and compared, showing excellent agreement (differences <3%). Additionally, organ DCs in other directions (postero-anterior, left-lateral, and right-lateral) were calculated and compared with those of the newborn and 1-year-old reference phantoms. Significant differences were observed (e.g., the stomach DC of the monkey was 5-fold greater than that of the 1-year-old phantom at 0.03 MeV) while the differences tended to decrease with increasing energy (mostly <20% at 10 MeV). The results of this study allows conducting MC simulations using the Visible Monkey to estimate organ-level doses, which should be valuable to support/improve monkey experiments involving ionizing radiation exposures.

• 한국농공학회지
• /
• 제37권5호
• /
• pp.62-72
• /
• 1995

공학분야에 널리 사용되고 있는 신뢰도 분석 방법 중에서 Monte Carlo simulation (MC), Mean-value First-Order Second-Moment Method(MFOSM), and Advanced First-Order Second-Moment(AFOSM) method들을 강물의 오염물질 농도와 수질기준치사이의 신뢰도 분석에 적용하였다. 미 환경 보건국에서 개발 보급한 QUAL2E를 이용하여 Mew Jersey에 위치한 Passaic강의 수질예측에서 4가지 주요인자(용존산소, 생물학적 산소요구량, 암모니아 그리고 조류)들이 정해진 수질기준치를 유지 할 수 있는 확률을 세가지 방법에 의해 추정한 후에 상호 비교하였다. MC방법에 의해 2,000회 simulation시켜서 그 결과가 시스템의 추계학적 성질을 잘 반영한 것으로 판단하여 비교기준으로 삼고 MFOSM과 AFOSM에 의해 추정한 결과와 비교하였다. MFOSM의 결과보다는 AFOSM의 결과가 전체적으로 MC의 결과에 더 근접하였으며, 이유는 AFOSM의 계산방법이 MFOSM의 선형근사로 인한 오차를 줄일 수 있었기 때문인 것으로 판단된다. MC방법의 결과와 다른 방법들의 결과사이의 차이가 입력 변수들이 평균값에서 멀어질 때가 많았는데 이는 MC의 경우 입력 변수들이 일정범위를 벗어나서 비현실적인 상황이면 model이 정지하는데, 다른 방법들은 simulation에 의한 것이 아니고 수학적인 계산에 의해서 신뢰도가 추정되기 때문에 이러한 상황이 반영될 수 없기 때문이다. 강물의 수질을 취급하는 공학적인 측면에서 보면, 이중에 가장 간편한 MFOSM이 많은 simulation이 필요한 MC나 계산방법이 상대적으로 복잡한 AFOSM에 비해 오차가 크지 않아서 이들을 대시하여 사용될 수 있다고 판단된다. 유래의 PAF가 분비된다는 것을 알 수 있었으며, 이러한 인자는 동결처리에서도 그 기능은 전혀 변하지 않는다고 본다. 이후에 있어서 mouse LIF의 첨가는 돼지의 수정란을 배반포 이후의 단계에까지 발달시킬 수 있었다. 있어서 더 적합한 것으로 판단되었다. 5. 개발된 모형은 논 관개의 물리적 측면과 관리목표 모두를 고려한 것으로 계산된 효율은 벼, 생육 각 단계에서의 효율 비교에 양호한 방법임을 알 수 있다.은 Sharpsburg 점질양토에 대한 S.C.S 한계허용치 10ton/ha/year 이내로 나타났다. 비처리구에서의 토양유실량은 평균 2.56ton/ha/year로 높게 나타난 반면 3개의 서로 다른 추리구인 비수구, 초생수로구 및 Bromegrass구에서는 각각 0.152, 0.192 및 0.290ton/ha/year로 낮은 결과를 가져왔다. 6. 평균 침전량에 대한 L.S.D. 검정 걸과 전시험구중 비처리구가 고도의 유의차를 나타낸 반면 비수구, 초생수로구 및 Bromegrass 목초구 간에는 아무런 유의차가 인정되지 않았다. 7. 농지보전 처리구인 배수구와 초생수로구는 비처리구에 비해 낮은 침두 유출량과 낮은 토양유실량을 나타내었다.구보다 14% 절감되는 것으로 나타났다.작용하는 것으로 사료된다.된다.정량 분석한 결과이다. 시편의 조성은 33.6 at% U, 66.4 at% O의 결과를 얻었다. 산화물 핵연료의 표면 관찰 및 정량 분석 시험시 시편 표면을 전도성 물질로 증착시키지 않고, Silver Paint 에 시편을 접착하는 방법으로도 만족한 시험 결과를 얻을 수 있었다.째, 회복기 중에 일어나는 입자들의 유입은 자기폭풍의 지속시간을 연장시키는 경향을 보이며 큰 자기폭풍일수록 현저했다. 주상에서 관측된 이러한 특성은 서브스톰 확장기 활동이 자기폭풍의 발달과 밀접한 관계가

• 대한화학회지
• /
• 제35권4호
• /
• pp.308-315
• /
• 1991

단순한 쿨롱액체들의 채심입방정계의 구조와 열역학적 성질들은 일성분 플라즈마에 대한 섭동론으로부터 계산된다. 섭동론(PT)과 Monte Cario(MC) 데이타의 비교는 좋은 일치를 보인다. 강체구 섭동론은 일성분 플라즈마 같은 먼 거리의 인력계에 적절하다. PT와 MC 데이타에 대한 동경 분포함수(g(r))와 구조인자(S(q))의 비교에서 일치를 보인다. 따라서 섭동론은 쿨롱액체의 성질 및 구조를 설명하는데 유용한 방법이다.

• Structural Engineering and Mechanics
• /
• 제21권3호
• /
• pp.255-273
• /
• 2005

Based on the random vibration theory, a response spectrum method is developed for seismic response analysis of linear, multi-degree-of-freedom structures under multi-support excitations is developed. Various response quantities, including the mean and variance of the peak response, the response mean frequency, are obtained from proposed combination rules in terms of the mean response spectrum. This method makes it possible to apply the response spectrum to the seismic reliability analysis of structures subjected to multi-support excitations. Considering that the tedious numerical integration is required to compute the spectral parameters and correlation coefficients in above combination rules, this paper further offers simplified procedures for their computation, which enhance dramatically the computational efficiency of the suggested method. The proposed procedure is demonstrated for tow numerical examples: (1) two-span continuous beam; (2) two-tower cabled-stayed bridge by using Monte Carlo simulation (MC). For this purpose, this paper also presents an approach to simulation of ground motions, which can take into account both mean and variation properties of response spectrum. Computed results based on the response spectrum method are in good agreement with Monte Carlo simulation results. And compared with the MSRS method, a well-developed multi-support response spectrum method, the proposed method has an incomparable computational efficiency.

• 대한방사선기술학회지:방사선기술과학
• /
• 제42권3호
• /
• pp.175-180
• /
• 2019

In this study, we have researched the effectiveness of silicone pad. A distribution of scatter ray in mammography was evaluated using Monte-Carlo (MC) simulation technique and then a silicone pad was applied to remove the scatter ray for improving image quality. Molybdenum target and Molybdenum filter combination made a difference of 59.8% to a number of photon at 17.5 keV. On the other hand, Tungsten target and Rhodium filter showed a variation of 24.5% at 20 keV. Mean 68 of SNR was increased in Selenia and mean 1.04 of SNR was raised in Senographe. Silicone pad was significantly effective to reduce the scatter ray that was generated by primary X-ray. It can decrease an absorption rate of scatter ray to patient body and whilst it improve the image quality from increasing SNR.

• Advances in Computational Design
• /
• 제4권1호
• /
• pp.43-52
• /
• 2019

Variation Analysis (VA) is used to simulate final product variation, taking into consideration part manufacturing and assembly variations. In VA, all the manufacturing and assembly processes are defined at the product design stage. Process Capability Data Bases (PCDB) provide information about measured variation from previous products and processes and allow the designer to apply this to the new product. A new challenge to this traditional approach is posed by the Industry 4.0 (I4.0) revolution, where Smart Manufacturing (SM) is applied. The manufacturing intelligence and adaptability characteristics of SM make present PCDBs obsolete. Current tolerance analysis methods, which are made for discrete assembly products, are also challenged. This paper discusses the differences expected in future factories relevant to VA, and the approaches required to meet this challenge. Current processes are mapped using I4.0 philosophy and gaps are analysed for potential approaches for tolerance analysis tools. Matching points of simulation capability and I4.0 intents are identified as opportunities. Applying conditional variations, incorporating levels of adjustability, and the un-suitability of present Monte Carlo simulation due to changed mass production characteristics, are considered as major challenges. Opportunities including predicting residual stresses in the final product and linking them to product deterioration, calculating non-dimensional performances and extending simulations for process manufactured products, such as drugs, food products etc. are additional winning aspects for next generation VA tools.