• Journal of the Korean Society of Propulsion Engineers
• /
• v.14 no.1
• /
• pp.1-10
• /
• 2010

Design and performance evaluation of $H_2O_2$ monopropellant thrusters to be used at reaction control of space launch vehicles were presented in this paper. Design thrust level was determined as 100, 250 Newton which is nominal thrust level for commercial space launch vehicles. Qualification thruster models including solenoid valves were developed after the reactor design were evaluated at engineering thruster models. Each thruster was evaluated by measurement of characteristic velocity, thrust, specific impulse, and pulse response times at sea level test condition.

• Advances in aircraft and spacecraft science
• /
• v.4 no.1
• /
• pp.21-35
• /
• 2017

Hydrogen peroxide is being considered as a monopropellant in micropropulsion systems for the next generation of miniaturized satellites ('nanosats') due to its high energy density, modest specific impulse and green characteristics. Efforts at the University of Vermont have focused on the development of a MEMS-based microthruster that uses a novel slug flow monopropellant injection scheme to generate thrust and impulse-bits commensurate with the intended micropropulsion application. The present study is a computational effort to investigate the initial decomposition of the monopropellant as it enters the catalytic chamber, and to compare the impact of the monopropellant injection scheme on decomposition performance. Two-dimensional numerical studies of the monopropellant in microchannel geometries have been developed and used to characterize the performance of the monopropellant before vaporization occurs. The results of these studies show that monopropellant in the lamellar flow regime, which lacks a non-diffusive mixing mechanism, does not decompose at a rate that is suitable for the microthruster dimensions. In contrast, monopropellant in the slug flow regime decomposes 57% faster than lamellar flow for a given length, indicating that the monopropellant injection scheme has potential benefits for the performance of the microthruster.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.194-197
• /
• 2005

Pulse-mode performance evaluation is made for a set of monopropellant hydrazine thrusters producing $0.95 lb_{f}$ of nominal steady-state thrust at an inlet pressure of 350 psia. With a brief description on the hot-firing test matrix, a typical data obtained from pulse-mode firing is given directly showing the variational behavior of propellant supply pressure, vacuum condition, and thrust, in addition to the thermal response of the thruster. The performance features are successfully compared to the reference criteria of 1-lbf standard monopropellant rocket engine.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.10a
• /
• pp.137-139
• /
• 2004

The monopropellant hydrazine thrusters are widely used for the satellite on-board propulsion system fulfilling various missions in space. They have outstanding features caused by the nearly unlimited restart capability and the very high credibility. The sole monopropellant thruster used at precent in nation is MRE-1 that is a standard component of NASA. It can produce 4.45 N of nominal thrust. Due to the glowing complexity with a satellite mission, the needs for thrusters of the diverse performance are being increased. The numerical simulation could give useful information to develop a new type thruster instead of the experiments performed previously. Therefore it is critical to make a reliable computer code to prepare design change of a thruster. In this paper, the performance analysis and validation of the satellite monopropellant hydrazine thruster currently used is accomplished as the preliminary study to serve valuable data for future design change.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.2
• /
• pp.32-38
• /
• 2004

A comprehensive understanding is given for the hot-firing test results, which were obtained throughout the verification program of mono-propellant hydrazine rocket engines (thrusters) producing 0.95 lbf (4.2 N) of nominal steady-state thrust at an inlet pressure of 350 psia (2.41 Mpa). A scrutiny for the engine performance is made in terms of thrust and temperature behavior of steady state firing mode at the given propellant injection pressures: Pinj = 400, 250, 100, and 50 psi. The thrust and specific impulse are compared with a reference performance of 1-lbf standard rocket engines and their normalization procedure is introduced. A practical engineering approach to the data measurement and reduction is addressed, too.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.399-404
• /
• 2010

Test results including the variation of propellant-inlet pressure, pulsed thrust, and environment vacuum with the accompanying thermal responses are presented for the pulse-mode operation of a set of monopropellant hydrazine thrusters producing $0.95lb_f$ of nominal steady-state thrust at an inlet pressure of 350 psia. The test data are reduced into the impulse bit, specific impulse, and force centroid that are the factors typically characterizing pulse-mode performance of small rocket engines. With a scrutiny to the performance parameters, their comparison to the reference criteria of 1 lbf standard monopropellant rocket engine are successfully made.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.10a
• /
• pp.131-134
• /
• 2003

There has been a renewed interest in the use of hydrogen peroxide as an oxidizer in bipropellant liquid rocket engines as well as in hybrid rocket engines. This is because hydrogen peroxide is a propellant of low toxicity and enhanced versatility. The present paper details the features of the designed engine of l00N thrust and its facility. Also explained is the arrangement of the distillation unit to be used to prepare rocket-grade hydrogen-peroxide propellant. Results of the simulated "cold" tests are presented.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.19-22
• /
• 2009

Design and performance evaluation of $H_2O_2$ monopropellant thrusters to be used at attitude control of space launch vehicles were presented in this paper. Flight model thrusters were designed after two reactors for 100, 250 Newton were conformed at engineering model. Each thruster was evaluated by measurement of characteristic velocity, thrust, specific impulse, and pulse response times.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.10
• /
• pp.92-98
• /
• 2006

An 1 lbf of NASA standard monopropellant thruster, MRE-1, is used for KOMPSAT (Korea Multi-Purpose Satellite) which is launched in 2006 and provides reliable and cost-effective means for attitude and maneuvering control system. The monopropellant thruster obtains required thrust by thermal decomposition process of propellant through catalyst bed. During firing, the decomposition plays a role of a heat source that may occur an excessive radiation heat transfer to peripheral structures and electronics in relatively low temperature condition.Therefore, the radiation heat shield is needed to prevent the critical radiative heat exchange between thruster and satellite during firing. This paper summarizes an overall development process of radiation heat shield from the design engineering up to the manufacturing.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.406-408
• /
• 2017

Ammonium dinitramide (ADN) Low toxicity monopropellant based 1N class thruster and test equipment were developed. Compared with the hydrazine which used in existing satellite thruster, ADN is easy to handle and has excellent physical characteristics such as density and specific impulse. Due to these characteristics, ADN is attracting attention as an eco-friendly propellant. In this paper, 1N class thruster and thrust measurement system was designed for performance testing of ADN monopropellant. The composition of the propellant for the design and experiment was set at 11.2: 25.4: 63.4 for each of Methanol: $H_2O$: ADN.