• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.481-483
• /
• 1998

The problem of production of new materials based on polyheteroarylenes and other polymers combining good mechanical and dielectric properties. radiation and chemical stability with heat- and thermal stability is related with the development of efficient synthesis technique of starting low-molecular compounds. Alicyclic dianhydrides are believed to be the promising monomers to synthesize various polymers.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.6
• /
• pp.2091-2094
• /
• 2012

• Proceedings of the Membrane Society of Korea Conference
• /
• 1992.10a
• /
• pp.47-48
• /
• 1992

Polymer containing monomers with pendant phospholipid polar group, 2-(metha-cryloyoxy) ethyl-2-(trimethylammonium) ethyl phosphate(MTP) were synthesized and blood compatibility of the copolymers was evaluated. Good permeability of biocomponents of molecular weight below 10$^4$ through cellulosic membrane coated with the copolymer of 2-(methacryloyoxy) ethyl-2-(tri-methylammonium)ethyl phosphate, butylmethacrylate(BMA), and glycidyl methacrylate(GMA) was observed, (Fig.1).

• Bulletin of the Korean Chemical Society
• /
• v.19 no.11
• /
• pp.1179-1184
• /
• 1998

Mesogenic and azo monomers were synthesized and copolymerized to obtain two copolymers composed of methacrylate and itaconate backbone. Glass transition temperatures of the copolymers were found to be slightly higher than ambient temperature. Both the copolymers showed liquid crystalline properties. Trans-cis isomerization in film state was observed under UV-irradiation with a light of 365 nm. Regarding the photochemical phase transition behavior, the transition rate of nematic-to-isotropic state was slightly faster in the methacrylate copolymer during irradiation at 365 nm and the rate of the reverse transition was much faster in itaconate copolymer under thermal effect.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.2
• /
• pp.198-203
• /
• 1997

Two different carbazolylnitrostilbene chromophores with second-order nonlinear optical (NLO) activity were newly synthesized by the reaction of 9-(2-hydroxyethyl)-9H-carbazol-3-carbaldehyde with 4-nitrophenylacetonitrile or 4-nitrophenylacetic acid. The NLO monomers were obtained by reaction of these chromophores with methacryloyl chloride. The side-chain nonlinear optical polymers were synthesized by the copolymerization of NLO monomer with methylmethacrylate using a free radical initiator. The chemical structures of the polymers were identified by spectroscopic means and the polymer properties such as molecular weight, Tg, solubility, UV-visible absorption, and second-harmonic generation (SHG) coefficients were investigated.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.3
• /
• pp.271-273
• /
• 1991

Poly (N-vinylcarbazole) was obtained spontaneously by 1,1,2,2-tetracyanocyclopropylstyrene(1) in polar solvents such as dichloromethane and acetonitrile at room temperature. The polymerization reactions were faster in more polar solvent and were not proceeded in less polar solvents such as chloroform and diethyl ether. The formation of poly (N-vinylcarbazole) was explained by bond-forming initiation theory, in which the initiating species are zwitterionic tetramethylene intermediates.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.632-638
• /
• 2012

Waterborne polyurethane dispersions (PUD) were synthesized from isophorone diisocyanate (IPDI), polycarbonate diol (PCD) and dimethylol propionic acid (DMPA) as starting materials. Subsequently, waterborne polyurethane-acrylic hybrid solutions were prepared by reacting the PUD with different amounts of the mixture of acrylate monomers, HEMA (2-hydroxyethyl methacrylate) and MMA (methyl methacrylate). As a result, the average particle size of waterborne polyurethane-acrylic hybrid solutions was increased with increasing the addition amounts of acrylate monomers. Also, the prepared coating films from waterborne polyurethane-acrylic hybrid solutions showed better abrasion resistance and chemical resistance than those of pure PUD.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.639-645
• /
• 2012

Waterborne polyurethane dispersion (PUD) was synthesized by capping the NCO groups of polyurethane prepolymers, prepared from isophorone diisocyanate, polycarbonate diol and dimethylol propionic acid, with aminopropyl triethoxysilane (APS). Subsequently, silylated acrylic polyurethane dispersion was synthesized by reacting the PUD with the mixture of acrylate monomers, 2-hydroxyethyl methacrylate and methyl methacrylate. The average particle size of silylated acrylic polyurethane dispersion, measured by the dynamic light scattering method, was increased from 39.0 nm to 399.8 nm by increasing the addition amounts of APS. Also, the pencil hardness of coating films of silylated acrylic polyurethane dispersion was enhanced from B grade to F grade with increasing APS content.

• Restorative Dentistry and Endodontics
• /
• v.44 no.4
• /
• pp.45.1-45.10
• /
• 2019

Objectives: Self-adhesive resin cements contain functional monomers that enable them to adhere to the tooth structure without a separate adhesive or etchant. One of the most stable functional monomers used for chemical bonding to calcium in hydroxyapatite is 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP). The aim of this study was to evaluate the influence of the10-MDP concentration on the bond strength and physical properties of self-adhesive resin cements. Materials and Methods: We used experimental resin cements containing 3 different concentrations of 10-MDP: 3.3 wt% (RC1), 6.6 wt% (RC2), or 9.9 wt% (RC3). The micro-tensile bond strength of each resin cement to dentin and a hybrid resin block (Estenia C&B, Kuraray Noritake Dental) was measured, and the fractured surface morphology was analyzed. Further, the flexural strength of the resin cements was measured using the three-point bending test. The water sorption and solubility of the cements following 30 days of immersion in water were measured. Results: The bond strength of RC2 was significantly higher than that of RC1. There was no significant difference between the bond strength of RC2 and that of RC3. The water sorption of RC3 was higher than that of any other cement. There were no significant differences in the three-point bending strength or water solubility among all three types of cements. Conclusions: Within the limitations of this study, it is suggested that 6.6 wt% 10-MDP showed superior properties than 3.3 wt% or 9.9 wt% 10-MDP in self-adhesive resin cement.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.8
• /
• pp.2731-2736
• /
• 2012

The use of pyrimethamine as antibacterial drug is limited by the poor solubility. To enhance its solubility, we prepared complexes of pyrimethamine with low-molecular-weight succinoglycan isolated from Sinorhizobium meliloti. Low-molecular-weight succinoglycans are monomers, dimers, and trimers of the succinoglycan repeating unit. The monomers and dimers were separated into their three species (M1, M2, and M3) and four fractions (D1 to D4) using chromatographic techniques, which were shown to be nontoxic. The solubility of pyrimethamine was markedly increased up to 42 fold by succinoglycan D3, where the level of its solubility enhancement was even 8-20 fold higher comparing with cyclodextrin or its derivatives. The complex formation of succinoglycan D3 with pyrimethamine was confirmed by $^1H$ nuclear magnetic resonance spectroscopy, Fourier-transform infrared spectroscopy, differential scanning calorimetry, scanning electron microscopy, and molecular modeling studies. Herein, we suggest that the low-molecular-weight succinoglycans may be utilized as highly effective solubilizers of pyrimethamine for pharmaceutical purposes.