• 제목/요약/키워드: Monoclinic

검색결과 541건 처리시간 0.022초

공침법에 의한 지르코니아분말의 합성 및 특성 III) ZrO2-Y2O3-Bi2O3의 특성 및 소결성 (A Synthesis and Characteristics for Zirconia Powders by Coprecipitation Method ; III) The Properties and Sinterabilities of ZrO2-Y2O3-Bi2O3)

  • 윤종석;이동인;오영제;이희수
    • 한국세라믹학회지
    • /
    • 제26권5호
    • /
    • pp.655-660
    • /
    • 1989
  • The physical properties and sinterabilities of ZrO2-Y2O3-Bi2O3 ternary system powder prepared by coprecipitation were investigated. The crystallization temperatures of ternary system were increased and the specific surface areas were decreased with increasing Bi2O3 amount as sintering agents both PSZ and FSZ. Especially, the partially stabilized zirconia showed monoclinic phase. The sinterability was increased with the amount of Bi2O3 added which caused liquid phase sintering.

  • PDF

CAD/CAM 지르코니아 재료의 특성 (Properties of Dental CAD/CAM Zirconia)

  • 배태성
    • 대한치과의사협회지
    • /
    • 제49권5호
    • /
    • pp.260-264
    • /
    • 2011
  • Zirconia ($ZrO_2$) is a crystalline dioxide of zirconium. Dental zirconia blocks for CAD/CAM are usually fabricated with powders of tetragonal zirconia polycrystals (TZP) stabilized with 3mol% yttria. Because of its mechanical properties similar to those of metals and color similar to tooth, it is evaluated to attain the two purposes at a time, strength and aesthetic in prosthetic dentistry. The ability of transformation of Y-TZP from tetragonal to monoclinic helps to prevent crack propagation and contributes the increase of strength and fracture toughness. Two different types of blocks, soft and hard, are used to prepare the zirconia frameworks. The fuzzy-sintered block is difficult in machining, so pre-sintered soft 3Y-TZP block is usually used to mill by computer aided machining.

$CsPbCl_3$ 결정의 강탄성 domain의 orientations (The orientations of ferroelastic domain in single Crystal, $CsPbCl_3$)

  • 신은정;정희태;김형국;정세영
    • 한국결정성장학회지
    • /
    • 제7권1호
    • /
    • pp.117-125
    • /
    • 1997
  • 강탄성 $CsPbCl_3$ 결정을 Czochralski법 및 Bridgman법을 사용하여 육성하고 XRD, DTA, 유전상수 측정 등을 통하여 구조 조사 및 상전이 온도를 확인하고 편광현미경 조사를 통하여 강탄성 domain의 존재를 확인하였으며 domain의 온도 의존성 등을 관찰하였다. 또한 cubic상에서 tetragonal, orthorhombic을 거쳐 monoclinic으로 상전이하였을 때 나타나는 domain들의 orientation에 대해 결정학적 고찰을 통하여 그리고 이론적으로 조사하여 일치되는 결과를 얻었다.

  • PDF

비대칭 압연시 알루미늄 1100 판재에서 집합조직 형성 (Development of Texture in Aluminum 1100 Sheets during Asymmetrical Rolling.)

  • 지영규;정효태;허무영
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2003년도 춘계학술대회논문집
    • /
    • pp.105-108
    • /
    • 2003
  • Sheets of aluminum alloy 1100 were asymmetrically cold rolled in a rolling mill with different roll speeds. In order to promote the shear deformation during asymmetrical rolling, cold rolling without lubrication was performed. The evolution of texture components during asymmetrical rolling was investigated by the calculation of the orientation distribution function (ODF) using the monoclinic sample symmetry. The strain state during asymmetrical rolling was tackled by means of FEM calculations. Asymmetrical rolling gave rise to the development of pronounced strain gradients throughout the thickness layers which resulted in the formation of strong texture gradients in the aluminum sheet.

  • PDF

$TlGaS_2:Er^{3+}$ 단결정의 Photoluminescence 특성 연구 (Photoluminescence Properties of $TlGaS_2:Er^{3+}$ Single Crystal)

  • 송호준;윤상현;김화택
    • 한국진공학회지
    • /
    • 제2권3호
    • /
    • pp.299-303
    • /
    • 1993
  • Erbium metal을 불순물로서 2mol% 첨가한 TlGaS2:Er3+ 단결정을 수평전기로에서 합성한 ingot를 사용하여 수직 Bridgman 방법으로 성장시켰다. 성장된 결정은 층상으로 이루어진 monoclinic 구조였으며, 10K에서 간접전이형 및 직접전이형 energy band gap은 각각 2.55eV, 2.57eV이었고, Er3+ 이온에 의한 두 개의 불순물 광흡수 peak가 524.9nm와 656.4nm에서 관측되었다. Themally stimulated current(TSC)를 측정하여 0.21eV와 0.38eV의 donor 준위와 0.71eV의 accptor 준위를 구하였다. 10K에서 측정된 photoluminescence(PL) spectrum에서는 632nm와 759nm에서 D-A pair에 의한 broad한 peak와 552, 559, 666, 813, 816, 827nm에서 Er3+ 이온에 의한 sharp한 peak들이 나타났다.

  • PDF

Annealing Temperature Dependence on the Physicochemical Properties of Copper Oxide Thin Films

  • Park, J.Y.;Kwon, T.H.;Koh, S.W.;Kang, Y.C.
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권4호
    • /
    • pp.1331-1335
    • /
    • 2011
  • We report the results of the characterization of Cu oxide thin films deposited by radio frequency (r.f.) magnetron sputtering at different annealing temperatures. The deposited Cu oxide thin films were investigated by scanning electron microscopy, spectroscopic ellipsometry, X-ray diffraction, atomic force microscopy, Xray photoelectron spectroscopy, and contact angle measurements. The thickness of the films was about 180 nm and the monoclinic CuO phase was detected. The $CuO_2$ and $Cu(OH)_2$ phases were grown as amorphous phase and the ratio of the three phases were independent on the annealing temperature. The surface of Cu oxide films changed from hydrophilic to hydrophobic as the annealing temperature increased. This phenomenon is due to the increase of the surface roughness. The direct optical band gap was also obtained and laid in the range between 2.36 and 3.06 eV.

$Cd_4SnSe_6$$Cd_4SnSe_6 :Co^{2+}$ 단결정의 광학적 특성 (Optical Properties of Undoped and Co-doped $Cd_4SnSe_6$ Single Crystals)

  • 한석룡;김화택
    • 한국진공학회지
    • /
    • 제2권4호
    • /
    • pp.486-490
    • /
    • 1993
  • Cd4SnSea6 & Cd4SnSe6 : Co2+ single crystals were grown by the chemical transport reaction (CTR) method. The grown single crystlas crrystallize in the monoclinic structrue and have the direct band gaps. The energy gaps of them are 1.68eV for Cd4SnSea6 & Cd4SnSe6 : Co2+ at 293K. The impurity opticla absorption peaks due to cobalt dped with impurity appear at 4879cm-1, 5392cm-1 and 6247 com-1, and are attributed to the electron transitions between the split energy levels of Co2+ ion sited at Td symmetry of Cd4SnSe6 single crystal.

  • PDF

CaO를 첨가한 2.5Y-TZP 세라믹스의 저온열화 거동 (Low Temperature Degradation Behavior for CaO Doped 2.5Y-TZP Ceramics)

  • 박정현;이한주;문성환;박한수
    • 한국세라믹학회지
    • /
    • 제29권5호
    • /
    • pp.341-346
    • /
    • 1992
  • The effects of CaO addition on the low temperature degradation behavior of 2.5Y-TZP ceramics were investigated. Y2O3-CaO-ZrO2 ceramics were prepared from the commercial Y-TZP powder added within 1 mol% of CaO. Fully tetragonal phase could be obtained at each composition under sintering condition of 1500$^{\circ}C$ for 1 hour. As the amount of CaO increased, grain size was decreased. From the result of heat treatment at 200$^{\circ}C$, volume fraction of monoclinic phase formed on the surface of each specimen was decreased with higher CaO amount. Stability of tetragonal ZrO2 phase for low temperature heat treatment was increased by CaO addition without the degradation of mechanical properties.

  • PDF

CuO가 첨가된 WO3 후막 가스센서 특성 연구 (Characteristics of CuO doped WO3 Thick Film for Gas Sensors)

  • 유일;이돈규;신덕진;유윤식
    • 전기학회논문지
    • /
    • 제59권9호
    • /
    • pp.1621-1625
    • /
    • 2010
  • Recently, due to increase in the usage of toxic gas and inflammability gas, the ability to monitor and precisely measurement of these gases is crucial in preventing the occurrence of various accidents. CuO doped and undoped $WO_3$ thick films gas sensors were prepared using screen-printing method on alumina substrates. A structural properties of $WO_3$:CuO thick films had monoclinic phase and triclinic phase of $WO_3$ together. Sensitivity of $WO_3$:CuO sensor at 2000 ppm of $CO_2$ gas and 50 ppm of $H_2S$ gas was investigated. 4 wt% Cu doped $WO_3$ thick films had the highest sensitivity of $CO_2$ gas and $H_2S$ gas.

GaN분말을 이용한 $Ga_{2}O_{3}$fiber-wool의 합성과 특성 (Synthesis of $\beta$-$Ga_{2}O_{3}$Fiber-Wool from GaN Powder and its Characteristics)

  • 조성룡;여운용;이종원;박인용;김선태
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 하계학술대회 논문집
    • /
    • pp.848-850
    • /
    • 2001
  • In this work, we investigated on the white-colored ribbon fiber synthesized from GaN powder. We convinced the formation of monoclinic phase $\beta$-Ga$_2$O$_3$from the X-ray diffraction pattern on ribbon fiber. The 10 K PL spectrum consisted with the strong emission band caused by self-activated optical center at 3.464 eV with the full-width at half maximum of 48 meV and the impurity related emission bands. Through this work, the optical properties and the electrical conductivity of $\beta$-Ga$_2$O$_3$, it will be useful for the fabrication of optoelctronic devices operating in visible spectrum region.

  • PDF