• Journal of Power Electronics
• /
• 제11권4호
• /
• pp.424-429
• /
• 2011

In this paper, the simulator of an on-line monitoring system for the range extender electric vehicle has been developed. The messages from the four control modules, the air pressure and fuel level sensors data, and the on/off switching states of 31 indicator lamps can be received through the control area network (CAN), and displayed on the graphic panel. The simulator was designed using the four DSP boards, variable resistors, and toggle switches instead of the four control modules, sensors, and switching state of indicator lamps on an actual series hybrid electric vehicle (SHEV) bus, respectively. The performance of the monitoring technologies was verified with the simulator at the laboratory, and then it was tested on an actual SHEV bus. The simulator is very useful at the initial development of the monitoring system at the hybrid-type or electrical vehicles.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.319-322
• /
• 2006

The Deep-sea miner system is composed of body, actuators, sensors, and devices for control and monitoring. At present, we are manufacturing the miner's body included actuators and already consisted with off-the-shelf embedded controller. But sensors and those devices were just determined. To previously test performance of embedded controller which manages control and monitoring of miner system, its simulator must be developed for control and monitoring. Hardware-In-the-Loop(HIL) simulation is being increasingly used in industrial applications. This is an effective tool for the evaluation of electric system and drives. In the HIL simulator, we can test and design the control and monitoring system freely without the risk of hardware ruins and the load of expenses. Also the programming software for miner operating is verified on the HIL simulator. In this paper, we introduce the concept of HIL simulator for control and monitoring of deep-sea miner.

• 한국산업융합학회 논문집
• /
• 제23권2_1호
• /
• pp.149-161
• /
• 2020

We describe a new approach to implement of trajectory control and track record of articulated manipulator based on monitoring simulator for smart factory. The learning control algorithm was applied in implementation real-time control to provide enhanced motion control performance for robotic manipulators. The proposed control scheme is simple in structure, fast in computation, and suitable for real-time control. Moreover, this scheme does not require any accurate dynamic modeling, or values of manipulator parameters and payload. Performance of the proposed controller is illustrated by simulation and experimental results for robot manipulator consisting of six joints at the joint space and Cartesian space.by monitoring simulator.

• Journal of Positioning, Navigation, and Timing
• /
• 제10권4호
• /
• pp.341-351
• /
• 2021

In this paper, a GNSS error generation simulator for Signal Quality Monitoring (SQM) is implemented by using Matlab based on mathematical models derived from the effect of GNSS signal and measurement errors. The GNSS signal measurement errors of interest in this paper include three cases such as Evil Wave Form (EWF), Multipath (MP) and Radio Frequency Interference (RFI). In order to verify the validity of the generated measurement errors, a simple form of metrics for detecting and monitoring GNSS errors is included in the simulator. The GNSS errors generated by the simulator are added to the GNSS measurement data from commercial GNSS receiver in real time, and then, the SQM is tested for various scenarios of each case configured by scenario setting of the user.

• 한국산업융합학회 논문집
• /
• 제24권4_1호
• /
• pp.397-409
• /
• 2021

This study proposes a new approach to implimentation of robust control and torque control response analysis based on monitoring simulator for smart factory. According to the physical properties of a flexible manipulator, a two time-scale approach, namely, singular perturbation ap proach, is further utilized for thorough analysis and general controller design. It is shown that asymptotic motional tracking can be effectively achieved, whereas the force regulation errors can be made arbitrarily small. For demonstration of the proposed technology performance, experiments of a eight joint flexible manipulator are performed for the proposed control method, and the reliability of proposed control results are illustrated based on monitoring simulator.

• 한국산학기술학회논문지
• /
• 제13권8호
• /
• pp.3326-3333
• /
• 2012

본 연구에서는 이 분야의 효과적인 공학기술교육을 위하여 능동형 교육용 시뮬레이터를 개발하였다. 개발된 시스템은 주행조건 제어 및 모니터링 시스템, 섀시 전자제어 시스템 모니터링 및 분석시스템, 가상 시뮬레이터 및 교육용 콘텐츠로 구성되어 있다. 여기서 주행조건 제어 및 모니터링 시스템은 다시 실차 시뮬레이터와 유압장비 및 원격제어 및 모니터링 시스템으로 구성되어 있다. 섀시 전자제어 시스템 모니터링 및 분석 시스템에서는 Labview 프로그램을 통하여 각종 센서와 액추에이터들의 동작상태를 모니터링 할 수 있도록 하였다. 그리고 가상 시뮬레이터 및 교육용 콘텐츠는 2D 플래시 및 3D 애니메이션으로 효과적인 교육의 멀티미디어 교육 자료를 제공하여 준다. 이러한 시스템은 교육용 뿐만 아니라 관련 분야 시스템의 모듈 연구 개발 시 성능 분석 장비로써의 활용도 가능할 것이다.

• 한국산업융합학회 논문집
• /
• 제22권5호
• /
• pp.561-573
• /
• 2019

This study proposes a new approach to implement smart factory based on robot monitoring system for a small and medium sized enterprise. The simulator includes the forward kinematics and inverse kinematics analyzes of articulated robots. We also modeled the dynamics of the robot and made it possible to simulate it in the program. We studied the interface between the user and the monitoring programming system using the GUI environment of Windows OS, and it is configured to select the appropriate trajectory planning and control method. The reliability of simulator is illustrated by simulation test.

• 대한의용생체공학회:의공학회지
• /
• 제38권3호
• /
• pp.111-115
• /
• 2017

Blood pressure is one of the important vital signs for monitoring the medical condition of a patient. Automated NIBP(non-invasive blood pressure) monitoring devices calculate systolic and diastolic blood pressures from the oscillation in cuff pressure caused by a pulsation of an artery. To validate the NIBP devices, we developed a simulator to supply the oscillometric waveforms obtained from human subjects. The simulator provided pressure pulses to device-under-test and device readings were compared to the auscultatory references. Fully automated simulation system including OCR(optical character recognition) were developed and used for NIBP monitoring devices. The validation results using the simulator agreed well with previous clinical validation. More validation studies using the standardized oscillometric waveforms would be required for the replacement of clinical trials to validate a new automated NIBP monitoring device.

• 해양환경안전학회지
• /
• 제28권6호
• /
• pp.937-945
• /
• 2022

자율운항선박(MASS : Maritime Autonomous Surface Ships)은, 고도의 자율도를 가지고, 계획된 경로를 따라 자율 운항하지만, 필요시 육상원격제어센터(SRCC : Shore Remote Control Center)에서 선박의 운항에 직접 개입할 수 있다. 본 연구에서는 이러한 자율운항선박의 운항을 육상에서 모니터링하고 유사시 원격제어하는 역할을 담당할 육상원격제어사(SRCO : Shore Remote Control Officer)의 교육훈련에 필요한 시뮬레이터 시스템의 운용개념과 이를 가능하게 하기 위한 요구기능에 대해 검토하였다. 육상원격제어 시뮬레이터 시스템은, 다수의 자율운항선박의 운항상황을 모니터링하는 Monitoring Station, 유사시 특정 선박의 운항에 직접 원격개입하는 Control Station의 기능을 모의하도록 하였고, 시뮬레이션 종합통제실, 자율운항선박 운항상황 모의 시뮬레이터, 그리고 주변의 유인선 운항을 모의하기 위한 통항선 시뮬레이터 등으로 구성하였다. 기능적으로는, 육상에서 선박을 직접 제어하기 위하여 원격으로 개입하는 ESRC(Emergency Situation for Remote Control) 상황을 정의하여 이러한 상황을 모의할 수 있도록 하였다.

• 한국산업융합학회 논문집
• /
• 제23권6_1호
• /
• pp.889-896
• /
• 2020

We describe a new approach to the analyze the control performance of robotic manipulator based on the monitoring system. The structure of monitoring simulator is consist of seven modes such as control state mode, coordinate mode, input/output mode, program mode, parameters mode, and track mode. The applied control algorithme consists of an time varying feed-forward and feedback controller. The proposed scheme is simple in structure, fast in computation, and suitable for real-time implimemtation. Moreover, this scheme does not require any accurate dynamic modeling and values of parameters. Performance of the proposed monitoring system is illustrated by simulation and experiment for robot manipulator with six degrees of freedom.