• Corrosion Science and Technology
• /
• 제4권6호
• /
• pp.242-249
• /
• 2005

A lot of parts in FGD (Flue Gas Desulfurization) systems of fossil-fuel power plants show the environments in which are highly changeable and extremely acidic corrosive medium according to time and locations, e.g. in duct works, coolers and re-heaters etc. These conditions are formed when system materials are immersed in fluid that flows on them or when exhausted gas is condensed into thin layered acidic medium to contact materials of the system walls and roofs. These environments make troublesome corrosion and air pollution problems that are occurred from the leakage of the condensed solution. To cathodically protect the metallic structures in extremely acidic fluid, the properties of the protective coatings on the metal surface were very important, and epoxy Novolac coating was applied in this work. On the base of acid immersion tests, hot sulfuric acid decreased the hardness of the coatings and reduced greatly the content of $Na_2O$, $Al_2O_3$, and $SiO_2$ among the main components of the coating. A special kind of CP(Cathodic Protection) system has been developed and tested in a real scale of the FGD facility. Applied coating for this CP system was peeled off and cracked in some parts of the facility. However, the exposed metal surface to extremely acidic fluid by the failure of the coatings was successfully protected by the new CP system.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.573-576
• /
• 2005

A compact linear and angular displacement measurement device was developed by combining a Michelson interferometer and an autocollimator to characterize the movement of a precision stage. A Michelson interferometer and an autocollimator are typical devices for measuring linear and angular displacement, respectively. By controlling the polarization of reflected beam from the target mirror of the interferometer, some part of light was retro-reflected to the light source and the reflected beam was used for angle measurement. The interferometer and the autocollimator use the same optic axis and the target mirror can be easily and precisely aligned orthogonal to the optic axis by monitoring the autocollimator s signal. The autocollimator was designed for angular resolution of 0.1 arcsec and dynamic range of 60 arcsec. The nonlinearity error of interferometer was minimized by trimming the gain and offset of the photodiode signals. Through the experiments, we evaluate the performance of measurement device and discuss its applications.

• 수산해양기술연구
• /
• 제31권3호
• /
• pp.264-271
• /
• 1995

제어전용 마이크로 프로세서와 PC간에, 본 연구에서 제안하는 이중 포트 램을 이용한 병렬처리 방식으로 하드웨어를 설계 제작하고, 제어응답실험을 행한 결과 기존의 범용 A/D & D/AC 카드로 수행하기 어려웠던 2개 이상의 제어 대상을 제어하고 모니터링 하는 작업을 원활히 수행할 수 있음을 확인하였다

• Safety and Health at Work
• /
• 제10권2호
• /
• pp.180-187
• /
• 2019

Background: There is considerable evidence that leadership influences workplace safety, but less is known about the relative importance of different leadership styles for safety. In addition, a leadership style characterized by an emphasis and a focus on promoting safety has rarely been investigated alongside other more general leadership styles. Methods: Data were collected through a survey to which 269 employees in a paper mill company responded. A regression analysis was conducted to examine the relative roles of transformational, transactional (management-by-exception active; MBEA), and safety-specific leadership for different safety behavioral outcomes (compliance behavior and safety initiative behaviors) and for minor and major injuries. Results: A safety-specific leadership contributed the most to the enhanced safety of the three different kinds of leadership. Transformational leadership did not contribute to any safety outcome over and above that of a safety-specific leadership, whereas a transactional leadership (MBEA) was associated with negative safety outcomes (fewer safety initiatives and increased minor injuries). Conclusion: The most important thing for leaders aiming at improving workplace safety is to continuously emphasize safety, both in their communication and by acting as role models. This highlights the importance for leadership training programs aiming to improve safety to actually focus on safety-promoting communication and behaviors rather than general leadership. Furthermore, an overly monitoring and controlling leadership style can be detrimental to attempts at achieving improved workplace safety.

• Mycobiology
• /
• 제50권5호
• /
• pp.345-356
• /
• 2022

The fungal distribution, diversity, and load were analyzed in the geographically segregated island groundwater systems in Korea. A total of 79 fungal isolates were secured from seven islands and identified based on the internal transcribed spacer (ITS) sequences. They belonged to three phyla (Ascomycota, Basidiomycota, and Chlorophyta), five classes, sixteen orders, twenty-two families, and thirty-one genera. The dominant phylum was Ascomycota (91.1%), with most fungi belonging to the Cladosporium (21.5%), Aspergillus (15.2%), and Stachybotrys (8.9%) genera. Cladosporium showed higher dominance and diversity, being widely distributed throughout the geographically segregated groundwater systems. Based on the diversity indices, the genera richness (4.821) and diversity (2.550) were the highest in the groundwater system of the largest scale. As turbidity (0.064-0.462) increased, the overall fungal count increased and the residual chlorine (0.089-0.308) had low relevance compared with the total count and fungal diversity. Cladosporium showed normal mycelial growth in de-chlorinated sterilized samples. Overall, if turbidity increases under higher fungal diversity, bio-deterioration in groundwater-supplying facilities and public health problems could be intensified, regardless of chlorine treatment. In addition to fungal indicators and analyzing methods, physical hydrostatic treatment is necessary for monitoring and controlling fungal contamination.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권2호
• /
• pp.166-171
• /
• 2015

Recently, the international standard RS-422 serial communication, which was primarily designed for the communications between micro-controllers, has been used as a communication method on the ship. However, as the NMEA (National Marine Electronics Association) 2000 standardization progresses recently, a high-speed Ethernet-based communication environment is expected to be an alternative communication method instead of the RS-422 gradually. In addition, the ship's main instrumentation equipment with versatility and convenience is implemented to control devices as monitoring and controlling tools. This paper describes an implementation of wireless ultrasonic anemometer and anemoscope data processing and logger system using PC network, where the control processing equipment such as a separate operational console, data-logger, and indicator is required for the system. For these, the related element technologies to implement ultrasonic anemometer and anemoscope data processing system are expressed as a functional modules, and the NMEA 2000 standard certified data-logger system is implemented without the separate operational console.

• 대한치과의사협회지
• /
• 제53권8호
• /
• pp.530-537
• /
• 2015

Conceptually, the emergency is classified as an urgency and an emergency. The Urgency is not immediately life threatening, but could become so if not resolved promptly. So, it requires prompt patient care same as in the emergency situation. However, the emergency is immediately life threatening and requires immediate action, such as calling 119 and basic life support. Most medical emergencies in the dental clinic cases are urgencies. The incidence of true emergencies is approximately 1/1,000,000. Adequate managing medical urgencies are important because the chance of encountering medical emergencies in the dental clinic is high and higher these days especially because of rapidly aging Korean society. Many dentists indicate that many dentists feel difficulties to recognize and treat medical problems. This paper reviews the concept of medical emergencies and how to cope with commonly occurring urgencies in the dental clinic such as loss of consciousness, hypoglycemia, hyperventilation syndrome. The best treatment for medical urgencies and emergencies in the dental clinic is prevention. Also, it is required to make preparation for emergency situations such as CPR education for dentists and being well-acquainted with equipment and drugs for the emergency care as well as to systemic medical evaluation, patient monitoring, and sedations for controlling patient's anxiety and pain. In this paper, simple algorithms based on guidelines for common urgencies in the dental clinic are suggested. In conclusion, every dentist has competencies to do the urgency care adequately and basic life support. Also, advanced cardiac life support is strongly recommended when sedation is performed in the clinic.

• Geomechanics and Engineering
• /
• 제21권6호
• /
• pp.551-564
• /
• 2020

High-stress and complex geological conditions impose great challenges to maintain excavation stability during deep underground mining. In this research, large anisotropic deformation and its management by support system at a deep underground mine in Western Australia were simulated through three-dimensional finite-difference model. The ubiquitous-joint model was used and calibrated in FLAC3D to reproduce the deformation and failure characteristics of the excavation based on the field monitoring results. After modeling verification, the roles of mining depth also the intercept angle between excavation axis and foliation orientation on the deformation and damage were studied. Based on the results, quantitative relationships between key factors and damage classifications were presented, which can be used as an engineering tool. Subsequently, the performance of support system installation sequences was simulated and compared at four different scenarios. The results show that, first surface support and then reinforcement installation can obtain a better controlling effect. Finally, the influence of bolt spacing and ring spacing were also discussed. The outcomes obtained in this research may play a meaningful reference for facing the challenges in thin-bedded or foliated ground conditions.

• 한국정보처리학회논문지
• /
• 제4권8호
• /
• pp.2038-2059
• /
• 1997

프로세서의 속도, 주기억장치의 크기 및 엑세스 속도, 입출력 대역폭 등 컴퓨터의 물리적 속성은 사용자에게 주어질 때 고정되어 있다. 이러한 제한 하에서, 여러 사용자가 컴퓨터의 자원을 공유하는 다중 프로세스 시스템의 성능은 사용자 프로세스와 자원의 상관 관계를 모니터하고 조정함으로써 향상될 수 있다. 본 논문은 객체 지향 개념을 성능 관리에 적용하여 객체화된 시스템의 자원 관리자와 사용자 프로세스 및 성능 관리자 사이의 대화 프로토콜 및 객체의 속성을 정의함으로써 성능 관리 시스템의 표준을 제시한다. 이러한 표준화를 통해 성능 관리의 대상이 되는 객체와 성능 관리자를 독립적으로 개발할 수 있고, 성능 관리자를 통해 시스템의 성능을 통합적으로 관리할 수 있다.

• 한국CDE학회논문집
• /
• 제20권4호
• /
• pp.420-430
• /
• 2015

Operator Training Simulators (OTSs) provide macroscopic training environment for plant operation. They are equipped with simulation systems for the emulation of remote monitoring and controlling operations. OTSs typically provide 2D block diagram-based graphic user interface (GUI) and connect to process simulation tools. However, process modeling for OTSs is a difficult task. Furthermore, conventional OTSs do not provide real plant field information since they are based on 2D human machine interface (HMI). In order to overcome the limitation of OTSs, we propose a new type of plant training system. This system has the capability required for collaborative training between operators and field workers. In addition, the system provides 3D virtual training environment such that field workers feel like they are in real plant site. For this, we designed system architecture and developed essential functions for the system. For the verification of the proposed system design, we implemented a prototype training system and performed experiments of collaborative training between one operator and two field workers with the prototype system.